The D32PRO is a royalty free, silicon proven, high performance soft core of a single-chip 32-bit embedded controller, with Floating Point Coprocessor. Thanks to its increased code density, the D32PRO meets power and size requirem...
|
Other |
Overview
The D8254 is a programmable interval timer/counter, binary compatible with industry standard 82C54. The D8254 solves one of the most common problems in any micro-computer system, the generation of accurate time delays under sof...
|
Other |
Overview
The D8255 is a programmable I/O device which is designed for use with all Intel and most other microprocessors. It provides 24 I/O pins which may be indi-vidually programmed in 2 groups of 12 and used in 3 major modes of operation:
...
|
Other |
Overview
The D8259 is a soft Core of Programmable Interrupt Controller. It is fully compatible with the 82C59A device. The D8259 Core manages up to 8-vectored priority interrupts for processor. Programming it to cascade allows for u...
|
Other |
Overview
The DMAC is hardware implementation of media access control protocol defined by the IEEE standard. DMAC in cooperation with external PHY device enables network functionality in design. It is capable of transmitting and rece...
|
Other |
Overview
The DCAN is a stand-alone controller for the Controller Area Network (CAN) widely used in automotive and industrial applications. DCAN conforms to Bosch CAN 2.0B specification (2.0B Active). Core has simple CPU interface (8...
|
Other |
Overview
The USB 2.0 HID Design Platform is a complete, integrated solution dedicated to use in wide range of USB based Human Interface Devices like mouse, keyboard or pen tablet.
Features...
|
Other |
Overview
The USB 2.0 Mass Storage Design Platform is a complete, integrated solution dedicated to use in wide range of USB based Mass Storage Devices like portable flash memory device, digital audio player, card reader or digital camera.
...
|
Other |
Overview
The DUSB2 is hardware implementation of full/high-speed peripheral controller that interfaces to UTMI bus transceiver. The DUSB2 contains the USB PID and address recognition logic, state machines to handle USB packets and t...
|
Other |
Overview
The DSPI is a fully configurable SPI master/slave device, which allows user to configure polarity and phase of serial clock signal SCK. It allows the microcontroller to communicate with serial peripheral devices. It is also capable of inter...
|
Other |
Overview
The DSPIS is a fully configurable SPI ma slave device, designated to operate with passive devices like memories, LCD drivers etc. The DSPIS allows user to configure polarity and phase of serial clock signal SCK. A serial cl...
|
Other |
Overview
The DSPI_FIFO is a fully configurable SPI master/slave device, which allows user to configure polarity and phase of serial clock signal SCK. It allows the microcontroller to communicate with serial peripheral devices. It is also capable of ...
|
Other |
Overview
I2C is a two-wire, bi-directional serial bus that provides a simple and efficient method of data transmission over a short distance between many devices. The DI2CM core provides an interface between a microprocessor / microcontroller and an...
|
Other |
Overview
I2C is a two-wire, bi-directional serial bus that provides a simple and efficient method of data transmission over a short distance between many devices. The DI2CMS core provides an interface between a microprocessor / microcontroller and a...
|
Other |
Overview
I2C is a two-wire, bi-directional serial bus that provides a simple and efficient method of data transmission over a short distance between many devices. The DI2CS core provides an interface between a microprocessor/microcontroller and an I...
|
Other |
Overview
I2C is a two-wire, bi-directional serial bus that provides a simple and efficient method of data transmission over a short distance between many devices. The DI2CSB provides an interface between a passive target device e.g. memory, LCD disp...
|
Other |
Overview
The D16450 is a soft Core of a Universal Asynchronous Receiver/Transmitter (UART) functionally identical to the TL16C450. D16450 performs serial-to-parallel conversion on data characters received from a peripheral device or...
|
Other |
Overview
The D16550 is a soft Core of a Universal Asynchronous Receiver/Transmitter (UART) functionally identical to the TL16C550A. The D16550 allows serial transmission in two modes: UART mode and FIFO mode. In FI...
|
Other |
Overview
The D16750 is a soft Core of a Universal Asynchronous Receiver/Transmitter (UART) functionally identical to the TL16C750. The D16750 allows serial transmission in two modes: UART mode and FIFO mode. In FIFO mode internal FI...
|
|
Overview
The D16950 is a soft core of a Universal Asynchronous Receiver/Transmitter (UART) functionally identical to the OX16C950. The D16950 allows serial transmission in two modes: UART mode and FIFO mode. D16950 ...
|
|
Overview
The DF6811 is a advanced 8-bit MCU IP Core with highly sophisticated, on chip peripheral capabilities. DF6811 soft core is binary-compatible with the industry standard 68HC11 8-bit microcontroller and can achieve a performa...
|
Other |
Overview
• highly sophisticated on chip peripheral capabilities
• up to 100 million instructions per second
• 11 times faster multiplication
The
|
Other |
Overview
• up to 100 million instructions per second
• almost 4 times faster thanoriginal implementation
• self-monitoring circuitry on-chip included
...
|
Other |
Overview
• two software-controlled power-saving modes
• ADC Controller
• integrated on-chip major peripheral functions
D68HC11E can ...
|
Other |
Overview
• two power saving modes: HALT, WAIT
• built-in real time hardware on chip debugger
• de-multiplexed Address/Data Bus to allow easy memory connection
...
|
Other |
Overview
• higher performance than standard 68000
• delivered with fully automated test-bench
• complete set of tests
The D68000 soft core is...
|
Other |
Overview
DFPMU is a Floating Point Coprocessor, designed to assist CPU in performing the floating point mathematic computations. DFPMU directly replaces C software functions, by equivalent, very fast hardware operations, which signi...
|
Other |
Overview
DFPMU-DP is a Floating Point Coprocessor, designed to assist CPU in performing the floating point mathematic computations. DFPMU-DP directly replaces C software functions, by equivalent, very fast hardware operations, which...
|
Other |
Overview
DFPAU is a Floating Point Arithmetic Coprocessor, designed to assist CPU in performing the floating point arithmetic computations. DFPAU directly replaces C software functions, by equivalent, very fast hardware operations, ...
|
|
Overview
DFPAU-DP is a Floating Point Arithmetic Coprocessor, designed to assist CPU in performing the floating point arithmetic computations. DFPAU-DP directly replaces C software functions, by equivalent, very fast hardware operat...
|
Other |
Overview
• 2 times faster compared to original implementation
• 35 instructions
• 14 bit wide instruction word
The DFPIC1655X is a low-cost, high perf...
|
Other |
Overview
• up to 33 instructions
• 2 times faster compared to original implementation
• power saving SLEEP mode
The DFPIC165X is a low-cost, ...
|
Other |
Overview
• 4 times faster compared to original implementation
• the best power use, price and performance combination
• advanced power saving SLEEP mode
The DR...
|
Other |
Overview
• 4 times faster compared to original implementation
• 35 instructions
• pipelined Harvard RISC architecture
The DRPIC166X is a low-cost, hig...
|
Other |
Overview
• more than 15. times faster tham standard 80C51 (at the same frequency)
• 24 times faster multiplication (12 times division)
• user programmable Program and Ex...
|
Other |
Overview
• pipelined RISC architecture
• more than 15. times faster than 80C51
• up to 14.632 VAX MIPS at 100 MHz
The DP80390CPU is an ultra ...
|
Other |
Overview
• 10 times faster compared to standard 8051
• Interface for additional Special Function Registers
• Pipelined RISC architecture
The DP80C51 is an ul...
|
Other |
Overview
• Almost 20.faster than the original 80C51 at the same frequency
• Up to 14.632 VAX MIPS at 100 MHz
• Pipelined RISC architecture
The DP8051 ...
|
Other |
Overview
• Almost 20 times faster than original 80C51
• 24 times faster multiplication (12 division)
• Special Function Registers
The DP8051CPU is an ...
|
Other |
Overview
• executes up to 200 million instructions per second
• more than 15 times faster than 80C51
• ultimate power/performance ratio
The DP80390XP is an u...
|
Other |
Overview
• Almost 10. times faster than standard 80C51 at the same frequency
• Ultimate low gate count
• Power Management Unit
The DT8051 is ...
|
Other |
Overview
• Almost 30. times faster than 80C51
• Quad-Pipelined architecture
• 24 times faster multiplication (12 times division)
DQ8051XP is an ultra ...
|
Other |
Overview
• Almost 60 times faster than the original 80C51
• Almost 5 times faster than 80C251 - at the same frequency
• Quad-Pipelined architecture
<...
|
Other |