SMT, PCB Electronic Industry News

SMT, PCB Electronics Assembly Manufacturing News

Stay informed with latest electronics manufacturing news added by SMTnet members. If your company released a new product, received an award, or expanded its business, share the news!


  • SMTnet
  • »
  • SMT, PCB Electronics Industry News

13862 EMS News Stories.

per page

The chiller’s shipment volumes about 300 units

Jul 23, 2016 | The chiller’s shipment volumes about 300 units

GUANGZHOU TEYU ELECTROMECHANICAL CO., LTD

GUANGZHOU TEYU ELECTROMECHANICAL CO., LTD

Guangzhou Teyu Electromechanical Co., Ltd. was established in 2002, which specializes in developing, producing and selling industrial chillers for more than 14 years with annual output of 60,000 units

Guangzhou, China

Manufacturer of Assembly Equipment

Logistics Dept.colleagues are checking chillers before shipping

Jul 23, 2016 | Logistics Dept.colleagues are checking chillers before shipping

GUANGZHOU TEYU ELECTROMECHANICAL CO., LTD

GUANGZHOU TEYU ELECTROMECHANICAL CO., LTD

Guangzhou Teyu Electromechanical Co., Ltd. was established in 2002, which specializes in developing, producing and selling industrial chillers for more than 14 years with annual output of 60,000 units

Guangzhou, China

Manufacturer of Assembly Equipment

CAMI Research, a WHCC Top Product Winner, Reports Milestone Continuity Measurement

Jul 21, 2016 | CAMI Research reports that a customer has successfully tested simultaneous, multipoint continuity in a two-mile long, multicore cable (rated at 10Ω/1000ft) using a CableEye M3UH tester.

CAMI Research Inc.

CAMI Research Inc.

CableEye® continuity and HiPot pass/fail & diagnostic Cable & Harness Test Systems w simple scripting, labeling, documentation, cataloging & relay control. Dynamically display continuity, Ω, diodes, IR, dielectric breakdown & more

Acton, Massachusetts, USA

Manufacturer of Assembly Equipment, Test Services

ADLINK IoT Gateway Line Expands Support for Intel® IoT Gateway Technology

Jul 21, 2016 | ADLINK Technology announces the release of three ADLINK IoT gateway models supporting Intel® IoT Gateway Technology. The MXE-110i, MXE-202i, and MXE-5400i, based on the Intel® Quark™, Intel® AtomTM, and Intel® Core™ processors, respectively, further expand the scope of ADLINK's IoT gateway-based scalable computing platforms. From energy-saving applications to intelligent analytics, ADLINK's IoT gateways supporting Intel® IoT Gateway Technology provide the ideal IoT-ready industrial platforms for a wide variety of applications.

ADLINK Technology, Inc.

ADLINK Technology, Inc.

Provider of wide range of embedded computing products and services to the test & measurement and automation industries.

New Taipei City 235, Taiwan

Manufacturer of Components

Conecsus Signs Gardner & Meredith Reps for US Southeast

Jul 21, 2016 | Conecsus announces the appointment of Gardner & Meredith, Inc., Manufacturer's Agents to represent Conecsus services and programs in the U.S. Southeast.

Conecsus LLC

David Gardner.

Conecsus LLC

The largest tin/lead secondary smelter in the western hemisphere, with a focus on recycling industrial metal waste streams. Areas of expertise include electronics dross, solder paste, solder wire, solder bar.

Terrell , Texas, USA

Manufacturer of Assembly Material

Universal Appoints Jeff Knight General Manager,  APL and Advanced Technology Assembly Services

Jul 21, 2016 | Universal Instruments is pleased to announce the appointment of Jeff Knight as General Manager of the Advanced Process Lab (APL) and Advanced Technology Assembly Services (ATAS). Knight will operate out of the company’s corporate headquarters in Conklin, NY and will be responsible for generating new business opportunities for Universal’s advanced technology groups at both the Conklin and Rochester, NY facilities while also ensuring an exceptional level of support and success for the existing customer base.

Universal Instruments Corporation

Jeff Knight General Manager of the Advanced Process Lab (APL) and Advanced Technology Assembly Services (ATAS).

Universal Instruments Corporation

Universal Instruments is a global leader in the design and manufacture of advanced automation and assembly equipment solutions for the electronics manufacturing industry.

Conklin, New York, USA

Manufacturer of Assembly Equipment, Pick and Place

Data I/O Announces LumenTMX Programming Technology Integration into the PSV5000 Programming System

Jul 21, 2016 | Ultra-Fast Managed and Secure programming performance at an extraordinary value now available in the PSV5000 for a cost-effective compact automated programming solution

Data I/O Corporation

Data I/O Corporation

Data I/O is the world's leading provider of manual and automated programming solutions for semiconductor (IC) devices. Data I/O's solutions, software and programming engine ensures devices are programmed correctly every time.

Redmond, Washington, USA

Manufacturer of Assembly Equipment

Japan UNIX Launches Robotic Soldering Modules to Automate Soldering Operations

Jul 21, 2016 | Japan UNIX announces that it has incorporated core technologies from its accumulated soldering expertise into various soldering modules and unit products.

Japan Unix Co., Ltd.

Japan Unix Co., Ltd.

Manufacturer of robotic soldering equipment including contact, laser and ultrasonic soldering available in several robotic platforms including desktop, SCARA, cartesian and six axis multi-articulated robots.

Tokyo, Minatoku, Japan

Components/Substrates, Manufacturer of Assembled PCBs, Manufacturer of Assembly Equipment, Soldering, Test Services

BTU Receives Repeat Customer Order for Multiple Units for LED Assembly

Jul 20, 2016 | BTU International today announced that it has received a repeat order from a North American-based customer for multiple PYRAMAX™ 125A units for LED assembly applications. PYRAMAX’s wide board capability and thermal uniformity were key factors in the purchase decision for the recent follow-on order.

BTU International

BTU International

Global supplier of advanced thermal processing equipment and processes to the electronics assembly market.

North Billerica, Massachusetts, USA

Manufacturer of Assembly Equipment

ASC International Receives High Customer Satisfaction Scores

Jul 20, 2016 | ASC International recently completed a study contracted with an independent third-party satisfaction firm to conduct a survey regarding the company’s overall customer satisfaction rate.

ASC International

ASC International

Supplier of Optical Based Inspection and Measurement Equipment.

Medina, Minnesota, USA

Inspection

Rocket EMS Debuts Voyager Software to Better Control the Workflow Process

Jul 20, 2016 | Rocket EMS introduces its newest software program, Voyager, which is designed to control requirements, documentation and material, process parameters and guidelines, track all data, quality and WIP, and alert when control, process or tracking deviates or a goal is achieved.

Rocket EMS

Rocket EMS

EMS company specializing in ultra-quick-turn (24 – 48 hour) manufacturing of Printed Circuit Boards, design and complementary services with a heavy focus in the New Product Introduction (NPI).

Santa Clara, California, USA

Assembly, Contract Manufacturer, Design, Manufacturer of Assembled PCBs, Service Provider

IPC Launches New Learning Management Platform, IPC EDGE

Jul 20, 2016 | IPC has launched a new learning management system, IPC EDGE. This online learning platform is designed to deliver the education needed to acquire and develop the competitive skills necessary to excel in the electronics industry. Through white papers, webinars, IPC standards, skill development and foundation courses, users gain the flexibility to learn the skills needed to advance their careers and improve the industry.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Trade Show Organizer

Data I/O Selected by Bosch Car Multimedia as Exclusive Partner for Managed and Secure Pre-Programming

Jul 19, 2016 | Data I/O Corporation announced it entered into an exclusive partnership with Bosch Car Multimedia for the next five years for its global pre-programming strategy.

Data I/O Corporation

Data I/O Corporation

Data I/O is the world's leading provider of manual and automated programming solutions for semiconductor (IC) devices. Data I/O's solutions, software and programming engine ensures devices are programmed correctly every time.

Redmond, Washington, USA

Manufacturer of Assembly Equipment

Cogiscan Is Hiring!

Jul 19, 2016 | Cogiscan announced several new job openings. The company is seeking an account manager for its equipment partners, as well as technical support specialists and JAVA program analysts.

Cogiscan Inc.

Cogiscan Inc.

Cogiscan provides factory-wide electronics manufacturing traceability (TTC), MSD control, component set up verification, PCB assembly error-proofing, components inventory management.

Bromont, Quebec, Canada

Inspection, Software Manufacturer

SMTA International Keynote Speaker Announced

Jul 19, 2016 | SMTA announced the keynote speaker for the 2016 SMTA International technical conference September 25 - 29, 2016 in Rosemont, Illinois.

Surface Mount Technology Association (SMTA)

Daniel Kuhl, Vice President of Engineering at Seagate Technology.

Surface Mount Technology Association (SMTA)

The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.

Eden Prairie, Minnesota, USA

Association, Non-Profit, Trade Show Organizer, Training / Education

Congresswoman Barbara Comstock Visits TTM Technologies Manufacturing Facility in Virginia

Jul 19, 2016 | Today, Congresswoman Barbara Comstock (R-VA-10) met with executives and employees of IPC-member company TTM Technologies at their manufacturing facility in Sterling, Virginia. Coordinated by IPC, the world’s leading association for the electronics industry, this visit is part of an ongoing effort to help policymakers learn first-hand about legislative and regulatory issues that impact the industry.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Trade Show Organizer

Guaranteed quality with the new PSE Power Supply Unit

Jul 19, 2016 | Control up to 4 tools via your PC.

JBC Soldering Tools

JBC PSE Four tools unit with robot

JBC Soldering Tools

Since 1929, JBC has been at the forefront in developing soldering and rework tools for electronic professionals. JBC is a renowned brand offering a quick and efficient service with a distributor network covering the 5 continents.

Molins de Rei, Spain

Soldering

BTU Combines Energy Pilot, RecipePro, and Industry 4.0 Solutions to Create Powerful Oven Control System

Jul 18, 2016 | BTU International is pleased to announce that it will exhibit in booth #1K30 at NEPCON South China, scheduled to take place August 30 to September 1, 2016, at the Shenzhen Convention & Exhibition Center. BTU will showcase components of its proprietary WINCON™ oven control software: RecipePro recipe generator software, jointly developed with Electronic Controls Design Inc. (ECD), and highlight the latest version of the Energy Pilot software and Industry 4.0 compliant solutions.

BTU International

BTU International

Global supplier of advanced thermal processing equipment and processes to the electronics assembly market.

North Billerica, Massachusetts, USA

Manufacturer of Assembly Equipment

Evolvi Schedule One of Europe’s Largest Online EMS Equipment Auctions

Jul 18, 2016 | Evolvi SMT announce that they will be hosting one of Europe’s largest online electronic manufacturing equipment auction on 20th – 21st July.

Evolvi SMT

Evolvi SMT

Staying competitive in Today SMT assembly marketplace means managing costs and getting the best value for your equipment investment. Evolvi offer you quality used SMT equipment at affordable prices.

Ayr , United Kingdom

Equipment Dealer / Broker

SEICA announces further expansion in China

Jul 18, 2016 | SEICA’s Chinese subsidiary, Seica Electronics (Suzhou), has doubled the size of their technical support team in the first half of 2016, and is looking to continue the trend in the near term. The Seica support team provide 24/7 technical support to the installed base in China, and is able to supply test application programs and fixtures directly from our Chinese offices.

SEICA SpA

SEICA SpA

SEICA offers innovative ATE solutions which range from Bare Board Test, Flying Probe Systems, In-Circuit and Combi Test to Functional Test.

Strambino, Italy

Manufacturer of Assembly Equipment, Test Services

KIC’s MB Allen to Present “Optimization of the Reflow Profile to Minimize Voiding”

Jul 18, 2016 | KIC today announced plans to participate in the SMTA Carolinas Chapter Tech Session, scheduled to take place Thursday, August 18th in Greenville, SC. The event will be hosted by Hubbell Lighting, Inc. MB (Marybeth) Allen will present “Optimization of the Reflow Profile to Minimize Voiding.”

KIC

KIC

KIC's provides products and services designed to improve a variety of thermal monitoring, profiling and process control applications.

San Diego, California, USA

Software Manufacturer

Medical Electronics Symposium Program Finalized

Jul 18, 2016 | The SMTA, iNEMI, and MEPTEC are pleased to announce the program for the 2016 Medical Electronics Symposium being held September 14-15, 2016 Marylhurst University near Portland, Oregon.

Surface Mount Technology Association (SMTA)

Surface Mount Technology Association (SMTA)

The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.

Eden Prairie, Minnesota, USA

Association, Non-Profit, Trade Show Organizer, Training / Education

Rocket EMS Purchases Fortus 3D Production System from Stratasys to Increase Service Offerings and Reduce Tooling Costs

Jul 18, 2016 | Rocket EMS announces the purchase of the Fortus 3D Production System, a 3D printer that allows prototype design parts to be created faster and at a lower cost compared to traditional machining, resulting in more design iterations and a more refined end product.

Rocket EMS

Fortus 3D Production System.

Rocket EMS

EMS company specializing in ultra-quick-turn (24 – 48 hour) manufacturing of Printed Circuit Boards, design and complementary services with a heavy focus in the New Product Introduction (NPI).

Santa Clara, California, USA

Assembly, Contract Manufacturer, Design, Manufacturer of Assembled PCBs, Service Provider

Schleuniger Wins the ASCO Award 2016 for Best Business Transformation

Jul 18, 2016 | This year’s ASCO Award for Best Business Transformation goes to the Schleuniger Group. This honor is awarded to the best and most sustainable business transformation in Switzerland.

Schleuniger, Inc.

Schleuniger, Inc.

Schleuniger, Inc. is a leading manufacturer of wire processing equipment. Our innovative automatic and semi-automatic machines are designed to cut, strip, crimp and mark all types of wire and cable.

Manchester, New Hampshire, USA

Other

Retrofit Your System with True Continuously Volumetric Dispense Technology

Jul 16, 2016 | Advanced dispense technology is available for integration into your dispensing system. Continuously Volumetric, drip-and-drool free dispense technology can now be retrofitted into your dispense robot. GPD Global's Volumetric PCD pumps ensure the success of applications like underfill, LED encapsulation, solder mask, silicones, conductive ink, conformal coatings, and more. Improve your throughput and yields by retrofitting a Volumetric PCD Pump into your dispense system to simplify the dispense process.

GPD Global

Figure 3: Direct Control Integration Kit

GPD Global

A Manufacturer of High Quality, Precision, Automated Fluid Dispensing and Component-Prep Systems.

Grand Junction, Colorado, USA

Adhesives/Dispensing, Component Preparation, Manufacturer of Assembly Equipment, OEM

SEICA Announces Further Eexpansion in China

Jul 16, 2016 | SEICA's Chinese subsidiary, Seica Electronics (Suzhou), has doubled the size of their technical support team in the first half of 2016, and is looking to continue the trend in the near term. The Seica support team provide 24/7 technical support to the installed base in China, and is able to supply test application programs and fixtures directly from our Chinese offices.

SEICA SpA

The Flying Probe Tester Pilot 4D V8 represents the latest frontier in flying probe test technology; it is the complete solution for those who want maximum performance: the highest test speed, low to medium volume, test coverage and flexibility, for prototyping, manufacturing, or repairing any type of board. Its vertical architecture is the optimum solution for probing both sides of the UUT simultaneously.

SEICA SpA

SEICA offers innovative ATE solutions which range from Bare Board Test, Flying Probe Systems, In-Circuit and Combi Test to Functional Test.

Strambino, Italy

Manufacturer of Assembly Equipment, Test Services

BTU’s PYRAMAX Featuring WINCON; the Industry’s Most Powerful Oven Control System at SMTA Ohio

Jul 14, 2016 | BTU International announces that it will exhibit at the SMTA Ohio Expo & Tech Forum, scheduled to take place Thursday, August 4, 2016 at the Embassy Suites Cleveland Rockside in Cleveland, Ohio. BTU will showcase its RecipePro recipe generator software, jointly developed with Electronic Controls Design Inc. (ECD), and will highlight the latest version of the Energy Pilot software and Industry 4.0 compliant solutions – all components of BTU’s proprietary WINCON oven control software.

BTU International

BTU International

Global supplier of advanced thermal processing equipment and processes to the electronics assembly market.

North Billerica, Massachusetts, USA

Manufacturer of Assembly Equipment

VJ Electronix to Give Three Presentations around Rework and X-ray at the PHASE 4, Inc. Arizona Show &Tell Technical Conference

Jul 14, 2016 | VJ Electronix today announced plans to participate in the PHASE 4, Inc. Arizona Show & Tell Technical Conference, scheduled to take place August 9-11, 2016 at TechShop in Chandler, AZ. VJ Electronix will give three presentations during the event, in addition to exhibiting the XQuick II with AccuCount Technology.

VJ Electronix

VJ Electronix

Rework and X-ray Inspection solutions for a variety of applications. VJ integrates proven industrial X-ray expertise with advanced SRT automation and NIS X-ray electronics inspection expertise.

Bohemia, New York, USA

Assembly, Inspection, Manufacturer of Assembly Equipment, Repair/Rework, Soldering

Importing 3D STEP files into FAB 3000

Jul 14, 2016 | FAB 3000 now has the ability to import 3D STEP files. A perfect solution for Mechanical Engineers who need to communicate with 2D ECAD engineers or convert their 3D designs to Gerber, ODB++, etc. Extract Board shapes, critical components, circuits, and generate files for PCB manufacturing purposes.

Numerical Innovations

Numerical Innovations

We have become a leader in the EDA software industry by empowering electronic designers and engineers with clever, high quality software tools which facilitate their designs for manufacturing.

Honolulu, Hawaii, USA

Software Manufacturer

FAB 3000 V7 - Get Better Manufacturing Results with PCB Realistic Preview

Jul 14, 2016 | When you can truly see a PCB in its finished form, it becomes much easier on the eye to "catch mistakes".

Numerical Innovations

Numerical Innovations

We have become a leader in the EDA software industry by empowering electronic designers and engineers with clever, high quality software tools which facilitate their designs for manufacturing.

Honolulu, Hawaii, USA

Software Manufacturer

PNC Inc. Purchases GA 75 VSD FF from Atlas Copco

Jul 14, 2016 | PNC Inc. recently made another investment in its pursuit to be as energy efficient as possible: the GA 75 VSD FF, 100 HP compressor. This machine is efficient in that not only is it able to manage its own workflow, but in the fact that it will pay for itself in about five years through savings in electricity ($25,000 per year).

PNC Inc.

PNC Inc.

Complete turnkey jobs from PCB design, Fabrication, Laser cut SMT stencil, PCB assembly (SMT and through hole), Cable assembly and wire harness, Membrane switches, Name-plates and graphical overlays, all under one umbrella!

Nutley, New Jersey, USA

Assembly, Contract Manufacturer, Design, Manufacturer of Assembled PCBs, Manufacturer of Bare PCBs

CE Duo Thunder Mop Starter Kits

Jul 14, 2016 | Blue Thunder Technologies has teamed with Vileda Professional to offer exclusive CE Duo Thunder Mop Starter kits.

Blue Thunder Technologies, Inc.

Blue Thunder Technologies, Inc.

Blue Thunder Technologies manufactures a wide variety of wiping products and can supply virtually any type of consumable item used in cleanrooms, assembly lines, laboratories, and manufacturing.

Enfield, Connecticut, USA

Adhesives/Dispensing, Antistatic, Assembly, Repair/Rework, Soldering

Seika Machinery Debuts the Malcom SP-2 Wetting Tester

Jul 13, 2016 | Seika Machinery is pleased to introduce the Malcom SP-2 Wetting Tester. The SP-2 helps to test the wettability of solder paste and components while actually simulating the SMT mounting and reflow process.

Seika Machinery, Inc.

Malcom SP-2 Wetting Tester.

Seika Machinery, Inc.

Seika Machinery provides electronics manufacturers with advanced machinery, superior materials and engineering services including Automated Test Equipment, SMTA assembly equipment and QA products

Torrance, California, USA

Cleaning, Distributor, Drilling/Routing, Inspection, Tape and Reel Services

Libra Industries’ Christopher R. Howell Memorial Foundation Awards $22,500 in Scholarships during Its 11th Annual Golf Outing

Jul 13, 2016 | Libra Industries, a privately held electronics manufacturing services (EMS) provider, recently sponsored the Christopher R. Howell Memorial Foundation’s 11th Annual Golf Outing at the Kirtland Country Club. During the event, Libra Industries’ CEO Rod Howell awarded three scholarships totaling $22,500.

Libra Industries, Inc.

Cheri Rossodivia and Brad Bindokas board members for the foundation.

Libra Industries, Inc.

A leading provider of integrated Electronic Manufacturing Services serving OEM manufacturers dealing with complex or technically sophisticated manufacturing requirements in diverse industries and applications.

Mentor, Ohio, USA

Contract Manufacturer

SEICA announces further expansion in China

Jul 13, 2016 | SEICA’s Chinese subsidiary, Seica Electronics (Suzhou), has doubled the size of their technical support team in the first half of 2016, and is looking to continue the trend in the near term. The Seica support team provide 24/7 technical support to the installed base in China, and is able to supply test application programs and fixtures directly from our Chinese offices.

SEICA SpA

SEICA SpA

SEICA offers innovative ATE solutions which range from Bare Board Test, Flying Probe Systems, In-Circuit and Combi Test to Functional Test.

Strambino, Italy

Manufacturer of Assembly Equipment, Test Services

Kester Hosted Successful Advanced Selective Soldering Process Seminar

Jul 12, 2016 | Kester hosted an Advanced Selective Soldering Process Seminar, on June 28 at their Global Headquarters in Itasca, IL.

Kester

Kester

A leading global supplier of assembly materials to the electronic assembly, component and microelectronic marketplaces.

Itasca, Illinois, USA

Manufacturer of Assembly Material, Soldering

Kester Hosted Successful Advanced Selective Soldering Process Seminar

Jul 12, 2016 | Kester hosted an Advanced Selective Soldering Process Seminar, on June 28 at their Global Headquarters in Itasca, IL.

Kester

Kester

A leading global supplier of assembly materials to the electronic assembly, component and microelectronic marketplaces.

Itasca, Illinois, USA

Manufacturer of Assembly Material, Soldering

PNC Inc. Announces New Sales Representatives on the West Coast

Jul 12, 2016 | PNC Inc. is pleased to announce the addition of KT Technical Sales, as their newest sales representative for the West Coast. President of KT Tech, Mr. Ken Thompson has over two decades’ worth of experience in the industry and has a very competent staff. KT Technical Sales is an independent manufacturer representative firm serving California and the greater southwest area. They represent various companies including PC board manufacturers, makers of custom sheet metal and enclosures, wire and cable Protection solutions, LCD solutions and power supplies.

PNC Inc.

PNC Inc.

Complete turnkey jobs from PCB design, Fabrication, Laser cut SMT stencil, PCB assembly (SMT and through hole), Cable assembly and wire harness, Membrane switches, Name-plates and graphical overlays, all under one umbrella!

Nutley, New Jersey, USA

Assembly, Contract Manufacturer, Design, Manufacturer of Assembled PCBs, Manufacturer of Bare PCBs

CCL Announce launch of new website

Jul 12, 2016 | A new look for Excess inventory management company CCL

Computer Components Ltd (CCL)

Computer Components Ltd (CCL)

CCL are specialist distributors of OEM Excess electronic components with over eighteen years’ experience in the industry. Send your RFQs for components we have in stock on Consignment from our customers.

Honiton, United Kingdom

Distributor

VERMES Microdispensing releases its Drop Detection System - DDS 80

Jul 12, 2016 | Microdispensing developer and manufacturer VERMES Microdispensing GmbH has announced its first fiber optic drop sensor, a unique fault detection system

VERMES Microdispensing GmbH

Innovative drop detector for micro dispensing

VERMES Microdispensing GmbH

VERMES Microdispensing is a world leader in the design and manufacture of innovative microdispensing concepts and systems for adhesives, silicones, greases, solvents and other fluids.

Otterfing, Germany

Adhesives/Dispensing, Manufacturer of Assembled PCBs, Manufacturer of Assembly Equipment, Manufacturer of Components, OEM

VERMES Microdispensing introduces its Multi Micro Dispensing System for low and medium viscosity

Jul 12, 2016 | The all-new Multi Micro Dispensing System (Multi MDS) is architected for independent and simultaneous four-valve multi dispensing. It simplifies and reduces dispense valve setup and operation time

VERMES Microdispensing GmbH

Microdispensing developer and manufacturer VERMES Microdispensing GmbH has launched its multi valve piezo based micro dispensing solution redefining high parallel installations.

VERMES Microdispensing GmbH

VERMES Microdispensing is a world leader in the design and manufacture of innovative microdispensing concepts and systems for adhesives, silicones, greases, solvents and other fluids.

Otterfing, Germany

Adhesives/Dispensing, Manufacturer of Assembled PCBs, Manufacturer of Assembly Equipment, Manufacturer of Components, OEM

Pickering to highlight High Voltage Relays with unusual package design at Semicon West

Jul 11, 2016 | Pickering Electronics are worldwide manufacturers and distributors of high quality Reed Relays for ATE, Low thermal EMF, RF switching and other specialist applications, available in Surface Mount, Single-in-Line (SIL), Dual-in-Line (DIL) and many other popular package styles.

Pickering Interfaces Ltd.

Pickering Interfaces Ltd.

Manufacturer of commercial and custom switching systems used in the electronics test market and for imbedded switch systems in OEM equipment.

Essex, United Kingdom

Manufacturer of Components

SHENMAO Introduces SMF-WB02 / SMF-WB51 Water Soluble Flux At Semicon West 2016 Booth # 6467 in San Francisco

Jul 11, 2016 | SHENMAO SMF-WB02 / SMF-WB51 Water Soluble Flux are made locally in the USA and with the same quality in 9 other worldwide locations. It is said their Low Viscosity (easy to apply), High Tackiness (slump resistant), consistent printability for BGA and Micro BGA Ball Assemblies and excellent wash ability after high temperature reflow (255ºC and 60 sec over 220ºC) create highly reliable Solder Joints with optimum maximized Quality.

Shenmao Technology Inc.

Shenmao Technology Inc.

With over 35 years of experience in solder material industry, SHENMAO Technology has successfully supplied electronics assembly materials, such as solder pastes, BGA Sphere, solder wire, solder bar, flux and Pb-Free solder alloys.

TaoYuan County, Taiwan

Assembly, Component Packaging, Manufacturer of Assembly Material, Repair/Rework, Soldering

Eunil Adds ECM-1100 to Coating Master ECM Series

Jul 10, 2016 | Eunil has released its latest in-line coating machine, the ECM-1100, as part of the Coating Master ECM Series.

Eunil Americas, Inc.

ECM-1100.

Eunil Americas, Inc.

Eunil is a world-wide leader in the Factory Automation Industry as a manufacturer of SMD peripheral equipment. We are excited to announce that we are expanding our scope of business into the Semicondu

Chula Vista, California, USA

Manufacturer of Assembly Equipment

Nordson ASYMTEK Teams with Parker Chomerics for High-volume, Precision Conductive Coating Spray Application

Jul 10, 2016 | Nordson ASYMTEK, a Nordson company (NASDAQ: NDSN), and Parker Chomerics, a Division of Parker Hannifin Corporation (NYSE:PH), are partnering at SEMICON West in Parker Chomerics' booth #6557 to demonstrate precision, high-volume spray applications for EMI coating solutions. One specific solution uses Nordson ASYMTEK's Select Coat® Conformal Coating System with a DispenseJet® applicator to apply thin coatings of Parker Chomerics' new CHO-SHIELD-604 conductive coating to achieve a target thickness of 25 µm. SEMICON West is being held at Moscone Center, San Francisco, CA, July 12-14, 2016.

Nordson ASYMTEK

Nordson ASYMTEK

A leader in automated fluid dispensing, jetting and conformal coating. Products range from benchtop dispensers and stand-alone dispensing workstations to fully automated, in-line conveyorized systems.

Carlsbad, California, USA

Adhesives/Dispensing, Assembly, Component Packaging, Manufacturer of Assembly Equipment

ZESTRON to Exhibit at SMTA Chihuahua Expo

Jul 10, 2016 | ZESTRON will highlight the ZESTRON® EYE, an automatic concentration measurement system at the SMTA Chihuahua Expo and Tech Forum at the Casa Grande Hotel in Chihuahua, CH, on Thursday, July 14th.

ZESTRON Corporation

ZESTRON Corporation

Manufacturer of high precision cleaning products and services for all required applications in the electronics manufacturing industry.

Manassas, Virginia, USA

Cleaning, Test Services

Soldering Support Online or On Site

Jul 10, 2016 | All our training workshops are run on site at your manufacturing facility, conference or exhibition venues worldwide. We offer the largest range of topics in the industry

ASKbobwillis.com

No Soldering defects just solutions

ASKbobwillis.com

On site and online Training and consultancy in electronics manufacture. Wide range of training products which are solder worldwide by IPC, SMTA, SMART Group and others

Chelmsford, Essex, United Kingdom

Consultant, Training / Education

January 5, 2016. Aqua Klean Systems selects TRC as it's Representative in the Southeast

Jul 09, 2016 | Aqua Klean Systems, a leading provider of advanced PCB cleaning equipment, announces that it has appointed Technical Resources Corporation (TRC)as its manufacturers’ representative in Florida, Puerto Rico and the Caribbean. TRC will represent and sell Aqua Klean Systems’ full line of PCB cleaning equipment.

Technical Resources Corporation

Technical Resources Corporation

Manufacturers' Representative covering Florida, Puerto Rico and the Dominican Republic. TRC specializes in electronics assembly, inspection, repair equipment and synergistic products.

Boca Raton, Florida, USA

Manufacturer's Rep

Machine Vision Products to Demonstrate Diverse Microelectronics and Packaging Inspection Toolbox of its Microelectronics AOI Platforms at Semicon West 2016

Jul 08, 2016 | Carlsbad, CA – July 8: Machine Vision Products (MVP) today announced it would be demonstrating their diverse inspection toolbox on the MVP 850 Platform for Microelectronics and Packaging at the Semicon West 2016 exhibition. Applications will include Lead Frame inspection for die placement, epoxy and wire bond as well as demonstrating new surface inspection capabilities. The exhibition is at the Moscone Center in San Francisco from July 12-14 2016. Machine Vision Products are exhibiting at booth #6471 in the North Hall.

Machine Vision Products, Inc

MVP 850 DWMS

Machine Vision Products, Inc

MVP is a market innovator and leader in imaging technologies for Surface Mount, Microelectronics and Packaging Technologies providing solutions for both commercial and military applications.

Carlsbad, California, USA

Inspection

Engineered Material Systems to Showcase Adhesives for Stringing and Shingling Next-Generation Solar Modules at Intersolar North America

Jul 07, 2016 | Engineered Material Systems will exhibit its new 561-400 series Low-Cost Snap Cure Conductive Adhesives at Intersolar North America, scheduled to take place July 12-14 in San Francisco, CA. The 561-400 series is designed for stringing and shingling crystalline silicon and heterojunction solar modules.

EMS International Corporation

EMS International Corporation

What we do: PCB Layout, Bare PCB, PCB Assembly, Component Sourcing, Molding, Enclosure, Connector, Cable, EMI Shield, Plastic Electronic product, Hardware Electronic product, PCMCIA, CardBus

Taoyuan City, Taoyuan County, Taiwan

Contract Manufacturer

  • SMTnet
  • »
  • SMT, PCB Electronics Industry News
FPC* - Fluid Pressure Control - Dispensing Pump

ii-feed SMD Intelligent Feeder