Series 7900 Convertible DIP Lead Formers
Automatically Adjusts for Body Thickness Variations.
One Machine for .300", .400" and .600" DIPS Fast, Simple Conversion - Under 2 Minutes.
Comes with Complete Conversion Kit Including ...
|
Lead Forming |
C7600 Convertible Cutter
One Machine for .300", .400" and .600" DIPs
Fast, Simple Conversion
Fixed Blades for Reliability & Accuracy
Comes with Complete Conversion Kit
Including Guides, Blades and Al...
|
Lead Forming |
An Axial Lead Former That's EASY to Set Up
Dial Lead Spacing Use jig and slide parts to set lead spacing. in .001" Turn dual arms - One each side increments.
Calibrate Cut Length Can't do. Scale. Place component in jaws and turn knob until jaws to...
|
Lead Forming |
Heavy-Duty Universal Lead Cut & Form Machines
One Machine Does it All: TO-247, TO-126, CKO, TO-237, HALL CELL, TO-92, TO-18, TO-5 LED, TO-220, TO-202, TO-218
Hand-Feed, Tube-Feed, Bowl-Feed
SIMPLE TO OPERATE:
Timed Dual Pneuamtic Cylinder Actu...
|
Lead Forming |
The HEPCO Model T3700-2 is a Heavy-Duty Shear Machine for the majority of radial-leaded components, including connectors, transistors, coils, trimpots, DIP ICs and capacitors. The steel frame and stainless steel cylinder, coupled with the high-flow valves, allow for quick, clean shearing of...
|
Lead Forming |
Single-Stroke Pneumatic Operation with Easily Interchangeable Dies
Die changes in under 1 minute
Steel base for extremely long life
Large variety of dies available
Slash labor costs over hand tool use
Precision dies to pr...
|
Lead Forming |
Cuts Components from Tape and Trims Leads - AT UP TO 85,000 PARTS PER HOUR!
Reliable
Simple to Use
Quick, Easy Die Changes
Transistors, Capacitors, Vertical Axials
Adjustable Speed 0-12,000 Parts/Hour
Dial Adjustable Form ...
|
Lead Forming |
Cuts Components from Tape and Trims Leads - AT UP TO 85,000 PARTS PER HOUR!
For .500" & 15mm Perforated Tape
Variable Speed: 0-85,000 Parts per Hour
Single Knob Adjusts Lead Cut Length
Long Life Rotary Cutters:&nb...
|
Lead Forming |
Universal Lead Forming & Cutting Machine
Maximum Output
Minimal Operator Involvement
HEPCO - Designed Bowls and Drivers for Quiet, Trouble-Free Operation.
Hand-Fed rate = 3,000 components per hour
Tube-Fed rate = 3,600 components...
|
Lead Forming |
Radial Lead Trimming Machine For Components with In-Line Leads
Loosen 4 adjustment knobs - Slide head to desired cut length per scale reading
Place component on slotted track
Check track slot width and adjust upper guide height
Set knob to desi...
|
Lead Forming |