Small Solder Dross Recovery Machine
· The reduction rate of solder dross is 80-90% (depending on the solder content).
· No need to add any chemicals, the product itself can separate high-quality solder.
· Button control, digital display temperature control...
|
Wave Soldering |
Solder Dross Recovery Machine
· The reduction rate of solder dross is 80-90% (depending on the solder content).
· No need to add any chemicals, the product itself can separate high-quality solder.
· Button control, digital display temperature control table...
|
Wave Soldering |
Automatic Width Adjust PCB Conveyor
1. “Panasonic” PLC control.
2. Leg support is made of 2mm metal material.
3. E-stop is equipped.
4. Rail is special aluminum material.
5. Belt is easy to replace which is easier to maintain.
6. Automatic width a...
|
Board Handling - Conveyors |
Soldering PCB Rework Conveyor
1. Modular design
2. Weighted design improves stability
3. Smooth and parallel width adjustment (screw)
4. PCB detection mode
5. Customizable equipment length
6. Adjustable transport speed
7. SMEMA
8. Motor drive
|
Board Handling - Conveyors |
Dual Lane PCB Conveyor.
1. SMEMA.
2. ESD flat belt.
3. “OMRON” sensor.
4. Individual pass button and speed control.
5. Emergency button.
6. Lane 1 fixed, and lane2,3,4 in very low gaps when only using lane 1 and lane 2.
Dual Lane PCB Conve...
|
Board Handling - Conveyors |
Dual Rail PCB Conveyor.
1. SMEMA.
2. ESD flat belt.
3. “OMRON” sensor.
4. Individual pass button and speed control.
5. Emergency button.
6. Rail 1 fixed, and Rail in very low gaps when only using Rail 1 and Rail 2.
Dual Rail PCB Conveyor
|
Board Handling - Conveyors |
PCB Magazine Buffer Machine
1. “Panasonic” PLC.
2. Touch screen control.
3. Acoustic-optic alarm system.
4. The lifting step can be set.
5. Standard SMEMA.
6. Magazine-type buffer, can pass good PCB directly to the next machine and store the fai...
|
Board Handling - Conveyors |
Semi-automatic Screwdriver
Automatic feeding
Smart control
Big screw compartment
Automatic counting
Semi-automatic Screwdriver
Main specifications:
Product model
SZ2800S
|
Hand Assembly |
Automatic Width Adjust PCB Conveyor
1. “Panasonic” PLC control.
2. Leg support is made of 2mm metal material.
3. E-stop is equipped.
4. Rail is special aluminum material.
5. Belt is easy to replace which is easier to maintain.
6. Automatic width a...
|
Board Handling - Conveyors |
Soldering PCB Rework Conveyor
1. Modular design
2. Weighted design improves stability
3. Smooth and parallel width adjustment (screw)
4. PCB detection mode
5. Customizable equipment length
6. Adjustable transport speed
7. SMEMA
8. Motor drive
|
Board Handling - Conveyors |
Dual Lane PCB Conveyor.
1. SMEMA.
2. ESD flat belt.
3. “OMRON” sensor.
4. Individual pass button and speed control.
5. Emergency button.
6. Lane 1 fixed, and lane2,3,4 in very low gaps when only using lane 1 and lane 2.
Dual Lane PCB Conve...
|
Board Handling - Conveyors |
Dual Rail PCB Conveyor.
1. SMEMA.
2. ESD flat belt.
3. “OMRON” sensor.
4. Individual pass button and speed control.
5. Emergency button.
6. Rail 1 fixed, and Rail in very low gaps when only using Rail 1 and Rail 2.
Dual Rail PCB Conveyor
|
Board Handling - Conveyors |
Online AOI For SMT from SZTech with AI algorithm. What is the AI algorithm SMT Online AOI?
AI intelligent programming
Automatically select solder joints and set parameters without importing CAD, Gerber, or other files.
Online/Offline programming
<...
|
Inspection |
Offline AOI From SZTech SMT can detect most of the regular defects of PCB.
Main specifications
Category
Item of offline AOI
Configuration
Visual inspection system
|
Inspection |
|
Wave Soldering Machine Manufacturers SZTech-SMT model N350 for DIP process after wave infeed conveyor.
Main specifications:
General specification
Dimensi...
|
Wave Soldering |
Small Wave Soldering Machine Low Cost From SZTech is a lost cost Wave Soldering Machine solution for the DIP process. It is also Lead-free.
Main Specifications of Small Wave Soldering
Model No
N200
|
Wave Soldering |
Nitrogen Reflow Oven from SZTech SMT provides a stable temperature environment to ensure the best solder quality performance of your SMT line.
Main Specifications of Nitrogen Reflow Oven
Model
10 zones nitrogen reflow oven...
|
Reflow |
Mini Wave Soldering Machine For DIP, great price and quality ratio wave soldering machine solution from SZTech-SMT.
Introduce:
1. Automatic conveying power system and automatic synchronous board feeding function.
2. The wave soldering peak adopts frequency conversion speed...
|
Wave Soldering |
Desktop Pick And Place Machine SMT Prototyping pick place. High-Speed High-Performance LED Mounting Machine chip mounter
Product Introduction:
SZTech SMT Series Desktop Pick And Place Machine main features: Small volume, easy to operate, run stable, and price affordable. They can mo...
|
Pick & Place |
Stainless Metal PCB Trolley, the best traffic solution to transfer PCB during SMT factory.
Main specifications of Stainless Metal PCB Trolley
SMT Stainless Metal PCB trolley
ESD index
10^6 ~...
|
Board Handling - Storage |
Stainless Metal PCB Magazine from SZTech SMT can be highly customized according to the real situations of production.
It is made of stainless metal material, which is high-strength and life-long.
Main specifications of The Stainless Metal PCB Magazine
|
Board Handling - Storage |
ESD PCB Trolley, the best traffic solution to transfer PCB during SMT factory.
Main specifications of ESD PCB Trolley
SMT ESD PCB trolley
ESD index
10^6 ~ 10^9 &Omeg...
|
Board Handling - Storage |
ESD PCB Magazine from SZTech SMT
Main specifications of ESD PCB Magazine
ESD Magazine Rack
External Size
460*400*563 mm
Adjustable Type
Gear/Screw
<...
|
Board Handling - Storage |
SMD Component Counter from SZTech SMT is suitable for almost all reel-type SMD components.
Main Specifications Of SMD Component Counter
Model
Configuration
MRD-901 classic old style
M...
|
Component Counters / SMD Counters |
Vacuum Sealing Machine For SMD parts from SZTech SMT to store SMD parts in the ESD package with no air conditions.
Main specifications Of Vacuum Sealing Machine:
Power
220V 50Hz
220V 50Hz
220V 50Hz
220V ...
|
Industrial Automation |
Yamaha Feeder Car is useful for Yamaha YS Series YSM20/ YSM10.
The body is made of stainless steel square welded, the whole is firm, the clamping position is molded, the aluminum alloy material is added with plastic parts, and the alignment is accurate, convenient, and practical, with fou...
|
Board Handling - Storage |
SIMENS Feeder Car X Series
The body is made of stainless steel square welded, the whole is firm, the clamping position is molded, the aluminum alloy material is added with plastic parts, and the alignment is accurate, convenient, and practical, with four swivel casters, two of which have ...
|
Board Handling - Storage |
SAMSUNG Feeder Car is useful for Samsung SM Series SM421/ SM481/ SM471.
The body is made of stainless steel square welded, the whole is firm, the clamping position is molded, the aluminum alloy material is added with plastic parts, and the alignment is accurate, convenient, and practical,...
|
Board Handling - Storage |
Panasonic Feeder Car is useful for Panasonic NPM CM402 CM602 CM101 CM212.
The body is made of stainless steel square welded, the whole is firm, the clamping position is molded, the aluminum alloy material is added with plastic parts, and the alignment is accurate, convenient, and practica...
|
Board Handling - Storage |
FUJI Feeder Car is useful for FUJI NXT XPF Series
The body is made of stainless steel square welded, the whole is firm, the clamping position is molded, the aluminum alloy material is added with plastic parts, and the alignment is accurate, convenient, and practical, with four swivel cast...
|
Board Handling - Storage |
PCB vacuum loader from SZTech SMT provides the most high-quality performance loader solution for SMT.
It is very easy to load the PCB into the SMT line. A conveyor system is connected smoothly with SMEMA signal control.
This model is mainly suitable for the front section of the SM...
|
Board Handling - Conveyors |
PCB Traverser Shuttle Conveyor For SMT and DIP from SZTech-SMT can provide a role of traffic control in SMT or manual insertion production line.
Main specifications:
Specification
TC-250W
TC-500W
Powe...
|
Board Handling - Conveyors |
PCB Telescopic Gate Conveyor For SMT from SZTech SMT provides a way for the operator to pass through when there is a long SMT production line.
Main specifications:
Specification
GC-350W
GC-460W
Power&...
|
Board Handling - Conveyors |
PCB Soldering Outfeed Conveyor For MI/ DIP from SZTech. It is always placed behind the wave soldering machine to provide cooling and conveyor functions.
Main specifications:
Item
Specification and material
...
|
Board Handling - Conveyors |
PCB Soldering Infeed Conveyor from SZTech-SMT, high-quality aluminum, and stainless metal profiles. SZTech-SMT can provide 100% customized service for the soldering infeed conveyor. It is using 35B stainless metal chain which is high-quality and can be used for many years even in high-temperature...
|
Board Handling - Conveyors |
PCB Shuttle Conveyor 2 in 1 out for SMT from SZTech-SMT. It also has 1 in 2 out, 2 in 2 out and a straight pass function. Can be highly customized by the real situation of your SMT production line. When the PCB is transferred into the shuttle conveyor, the shuttle conveyor will move the PCB to th...
|
Board Handling - Conveyors |
PCB Reject Conveyor For SMT from SZTech-SMT provides a buffer function in an SMT production line when there is a time gap between two processes.
Main specifications:
Specification
RC-800L
RC-1000L
Pow...
|
Board Handling - Conveyors |
PCB Online Cleaning Conveyor For SMT from SZTech. Before the solder paste is printed, remove the small chips, dust, fibers, hair, metal particles, and other foreign matter on the surface of the PCB pad to ensure that the PCB surface is in a clean state before printing, eliminate the static electr...
|
Board Handling - Conveyors |
PCB Mini Loader For SMT, an easy PCB loader solution for SMT.
The operator does not need to insert the board very carefully, the loader will arrange it perfectly!
No air controller is needed, the board will be sent by the motor of the conveyor.
The machine is small when co...
|
Board Handling - Conveyors |
PCB Magazine OK/NG unloader For SMT from SZTech, there is a shuttle system before the PCB magazine unloading system. The OK/NG unloader will be able to receive a signal from AOI or SPI equipment, the signal will enter with OK or NG, then, the shuttle system will move the car to the corr...
|
Board Handling - Conveyors |
ESD Belt Conveyor With Workbench For Assembly from SZTech-SMT. All sizes and materials of it are customizable. It can be placed after wave out feed soldering conveyor.
Below is a simple drawing for your reference! ALL SIZES ARE CUSTOMIZABLE!!
Main speci...
|
Board Handling - Conveyors |
ESD Belt Conveyor With Workbench For Assembly from SZTech-SMT. All sizes and materials of it are customizable. It can be placed after wave out feed soldering conveyor.
Below is a simple drawing for your reference! ALL SIZES ARE CUSTOMIZABLE!!
Main speci...
|
Board Handling - Conveyors |
PCB Magazine Unloader For SMT
AC lift motor.
Cylinder or motor to push board.
Customized height.
Panasonic PLC smart control.
HMI touchscreen control.
Airtek air control.
“Omron” sensor.
...
|
Board Handling - Conveyors |
PCB Magazine Loader For SMT
AC lift motor.
SMC cylinder to push board.
Customized height.
Panasonic PLC smart control.
HMI touchscreen control.
Airtek air control.
“Omron” sensor.
SME...
|
Board Handling - Conveyors |
PCB Magazine and Vacuum Loader. It combines two ways to load PCB into the SMT production line.
It provides high flexibility for an SMT line. When there is a bare PCB, the operator can use vacuum mode to load the board, while when there is a PCB with components, the operator can choose to u...
|
Board Handling - Conveyors |
PCB Insertion DIP MI Conveyor For Through Hole Process. SZTech-SMT produces it in high-strength aluminum and stainless metal profiles, the speed is adjustable from 0~3 meter/s.
Main specifications of PCB Insertion DIP MI Conveyor
The length and width of it can be customized!
<...
|
Board Handling - Conveyors |
PCB Flipping Conveyor For Dual-side SMT Process from SZTech-SMT, it can flip PCB to the other side and send it to the next process of the SMT production line.
Main specifications of PCB Flipping Conveyor
Specification
FC-350W
F...
|
Board Handling - Conveyors |
PCB de-stacker Type Loader For SMT from SZTech SMT
It can use as a loader or an unloader for bare PCB. Loading the PCB into the PCB de-stacker is very easy. It can save a lot of time for operators to insert the PCB into the PCB magazine.
HMI touchscreen with human-friendly operate...
|
Board Handling - Conveyors |
PCB 90-Degree Turn Conveyor For SMT from SZTech SMT. It can help PCB turn 90 degrees in the SMT production line. When there is a complicated situation in the SMT production line, the PCB turning conveyor can always guide PCB to the correct place.
Main specifications of PCB 90-Degree Turn...
|
Board Handling - Conveyors |
PCB Linking Conveyor from SZTech SMT can be customized in multiple lengths, widths, and heights. The PCB linking conveyors we producing are all have the below configurations:
High-quality step motor.
Omron sensor.
Customizable height, length, and width.
|
Board Handling - Conveyors |