Juki Advantages of JUKI electric feeder
Model: |
Juki Advantages of JUKI electric feeder |
Category: |
|
Model Year: |
2019 |
Condition: |
|
Location: |
China |
Offered by: |
|
|
Advantages of JUKI electric feeder
With the electronic parts more sophisticated, more and more small, the use of electric feeder has become the standard placement of the placement machine, the old placement machine can use electric feeder has become an urgent demand for the factory, and I Division VISKER Electric Feida is to meet this demand, it not only the old placement machine in the accuracy of the quality of the overflight, but also make the placement machine in the production efficiency increased by about 10%.
Comparison of VISKER Electric Feida and Traditional Mechanical Aerodynamic
First, interoperability does not interfere with each other
VISKER electric feeder and mechanical feeder can be the same time, with the platform work without interfering with each other. For the current market of the mainstream placement machine JUKI models from the KE700 series to KE2000 series, X, FX series, F series of all models can be simply upgraded to VISKER electric Feida use, and old machinery can be used together with the common platform The To meet the needs of customers with any mechanical and VISKER electric feeder.
Second, to solve the mechanical Feida, vibration, wear fast, low precision, high throw material, flip, with the low efficiency of suction problems
VISKER electric feeder has a precision electronic control board, high precision servo feed motor, high-power volume waste motor, and precision stamping parts, high-strength aluminum alloy floor as one of the existing mainstream electric rack (Panasonic NPM, Fuji NXT and other electric The same configuration, to solve the 0201 to 0805 electronic components to ensure the stability of parts placement, all the nozzle can simultaneously suck, suction to improve production efficiency and reduce labor costs.
Third, to solve the mechanical Feida uninterrupted waste material with the problem
VISKER electric feeder of the high-power volume of waste motor, and shrink the ease of high-strength elastic rocker arm, firmly press the waste film, the relative mechanical feeder of the one-way friction wheel structure, often excessive force does not occur with no roll With the frequent failure of the failure to effectively reduce the belt does not lead to lead to the occurrence of failure.
Fourth, the solution to the factory need to purchase 8X2, 8X4 two kinds of mechanical rack, in order to complete the production required to increase the cost of purchase
VISKER electric Feida has a patented design, a Feida has 8X2, 8X4 switching function at any time to meet the production needs, to overcome the need to purchase a variety of mechanical rack to meet production needs. Such as Feida 0201,0402,0603, VISKER Feida one can complete the production needs.
5, to solve the mechanical feeder on the line, the Y direction can not achieve the same suction led to frequent replacement Feida, adjust the re-loading, waste a lot of time, waste of labor, reduce production efficiency
VISKER electric feeder on-line production VISKER feeder feeding position fine-tuning function, can achieve the material and patch head of the direct calibration, fast and accurate realization of all Feida synchronous placement of the advantages of speed up on-line speed, reduce the throwing, improve production effectiveness.
Sixth, to solve the problem of high fatigue loss of mechanical feeder life
VISKER electric feeder, single Feida can continue to produce more than 10 million points.
VISKER-FEEDER above the advantages of JUKI placement machine platform can be achieved.
---Becky Su
becky@hysmt.cn
Company Information:
.gif)
