Company Information:
Nov 20, 2023 | MIRTEC announces its receipt of the prestigious 2023 GLOBAL Technology Award in the Conformal Coating Equipment category. The award was presented in recognition of MIRTEC's groundbreaking GENESYS-CC AI Based Conformal Coating AOI Series during an award ceremony held at productronica in Munich on Nov. 14, 2023.
Nov 13, 2023 | MIRTEC announces the development of groundbreaking inspection technologies that it will unveil at productronica 2023, scheduled to take place Nov. 14-17 at the Messe München in Munich, Germany. The new systems address critical challenges in 3D inspection performance of solder joints, inspection speed for tall component inspections, and measurement range limitations, offering manufacturers the perfect solution for enhanced quality and productivity.
Oct 30, 2023 | MIRTEC today announced that it is the recipient of the 2023 Mexico Technology Award in the Conformal Coating Inspection category for its revolutionary GENESYS-CC AI Based Conformal Coating AOI Series. The award was announced during a ceremony held on Wednesday, October 25, 2023 during the SMTA Guadalajara event in Mexico.
Oct 30, 2023 | MIRTEC proudly announces its receipt of the prestigious 2023 Service Excellence Award from CIRCUITS ASSEMBLY magazine in the category of Test and Inspection Equipment. The award was presented by Mike Buetow, President, PCEA, to Robert Horowitz, MIRTEC's National Sales Manager, during a ceremony held on Tuesday, Oct. 10, 2023, during the SMTA International Exposition.
Oct 16, 2023 | MIRTEC announces the release of their All-New ART Hybrid 3D AOI System at Productronica 2023. The World's leading trade fair for the electronics manufacturing industry will take place Nov. 14-17, 2023, at the Trade Fair Center Messe München, Germany. All are welcome to MIRTEC's Booth #461 in Hall A2 for a detailed demonstration of what will undoubtedly be recognized as the World's Most Technologically Advanced 3D AOI System!
Sep 25, 2023 | MIRTEC is pleased to announce that Robert Horowitz has been promoted to the position of National Sales Manager for MIRTEC's North American Sales and Service Division.
Sep 25, 2023 | MIRTEC is pleased to announce its participation in the upcoming SMTA Guadalajara Expo on Wednesday, Oct. 25, 2023. The event is scheduled to take place at Expo Guadalajara in Jalisco, Mexico. In Booth 319, MIRTEC will feature a total of four (4) Inspection Systems specifically designed to address the full spectrum of inspection requirements associated with the Electronics Manufacturing Industry:
Sep 11, 2023 | MIRTEC is excited to announce its participation in the highly anticipated SMTA International Exhibition, scheduled to take place at the Minneapolis Convention Center in Minnesota from October 10-11, 2023. MIRTEC will proudly showcase its groundbreaking MV-6 OMNI 3D AOI Series featuring the exclusive OMNI-VISION® 3D Inspection Technology in booth #1201.
Apr 11, 2023 | MIRTEC will premier its complete line of 3D AOI and SPI Inspection Systems at SMTconnect, scheduled to take place May 9-11, 2023 in Nuremberg, Germany. The company will showcase a total of five (5) Inspection Systems specifically designed to address the full spectrum of inspection requirements associated with the electronics manufacturing industry in Hall 4A, Stand 128.
Feb 13, 2023 | MIRTEC is pleased to announce that it awarded Bob Wons of Precision Automation & Assembly 'Manufacturers' Representative of the Year' for 2022. Brian D'Amico, President of MIRTEC Corp., presented the award to Bob Wons during the 2023 IPC APEX EXPO in San Diego, CA.
Jan 23, 2023 | MIRTEC Co. LTD, reports continued growth in Sales Revenue for its North American Sales and Service Division for 2022. "We are very pleased to announce that sales revenue for our North American Division has grown by over 22.6% with respect to 2021." stated Brian D'Amico, President of MIRTEC Corp.
Dec 14, 2022 | MIRTEC will premier its complete line of 3D AOI and SPI Inspection Systems in Booth #1841 at the 2023 IPC APEX EXPO. The premier technical conference and exhibition for the electronics manufacturing industry will take place Jan. 24-26, 2023, at the San Diego Convention Center in California.
Oct 04, 2022 | MIRTEC is pleased to announce plans to exhibit at SMTA International, scheduled to take place Nov 2-3, 2022 at the Minneapolis Convention Center in Minnesota. The MIRTEC team is looking forward to meeting with attendees at booth #906 for a detailed demonstration of its MV-6Z OMNI 3D In-Line AOI system.
Sep 26, 2022 | MIRTEC, "The Global Leader in Inspection Technology," received a 2022 Mexico Technology Award in the category of Inspection – AOI for its all-new GENESYS-PIN 3D AOI System. The award was announced during a ceremony that took place Wednesday, Sept. 21, 2022 during SMTA Guadalajara in Mexico.
Apr 13, 2022 | MIRTEC will premier its line of 3D AOI and SPI Inspection Systems Hall 4A, Stand 128 at SMTconnect, scheduled to take place May 10-12, 2022 in Nuremberg.
Mar 14, 2022 | MIRTEC is pleased to announce that it awarded Techsystems Manufacturers' Representative Organization of the Year for 2021. Brian D'Amico, President of MIRTEC Corp. presented the award to Eric Baker, Sales Engineer at Techsystems, during the IPC APEX EXPO in San Diego.
Dec 21, 2021 | MIRTEC will premier its complete line of 3D AOI and SPI Inspection Systems in Booth #1122 at the 2022 IPC APEX EXPO. The premier technical conference and exhibition for the electronics manufacturing industry will take place January 25-27, 2022, at the San Diego Convention Center.
Nov 22, 2021 | MIRTEC is pleased to announce that it received a 2021 GLOBAL Technology Award in the category of Inspection – AOI systems for its MV-9 SiP HYBRID 3D AOI system. The award was announced during a ceremony that took place Tuesday, Nov. 16, 2021 during productronica in Munich, Germany.
Nov 05, 2021 | MIRTEC is pleased to announce that it received a 2021 Mexico Technology Award for its revolutionary MV-9 SiP HYBRID 3D AOI system. The award was announced during a ceremony that took place Wednesday, Nov. 3, 2021 during SMTA International in Minneapolis, MN.
Oct 11, 2021 | MIRTEC will showcase its cutting-edge INTELLI-PRO AI Based Smart Factory Automation Solution and GENSYS-PIN Automotive Pin Inspection System in booth #461, Hall A2 at the 2021 Productronica exhibition. The world's largest exhibition for the electronic manufacturing industry will take place on Nov. 16-19, 2021, at Messe Munich exhibition hall in Germany.
Oct 04, 2021 | MIRTEC is pleased to announce their plans to exhibit at the SMTA International Exposition, scheduled to take place Nov. 3-4, 2021, at the Minneapolis Convention Center in Minneapolis, MN. The MIRTEC team is looking forward to meeting with attendees at booth #3500 for a detailed demonstration of its MV-6Z OMNI 3D In-Line AOI system.
Sep 02, 2021 | MIRTEC announces the release of their comprehensive AI based Smart Factory Automation solution 'INTELLI-PRO'. This Technologically Advanced Software and Algorithm Package is specifically designed for the purpose of improving the performance and convenience of MIRTEC's complete line of AOI machines. INTELLI-PRO consists of a proprietary Deep Learning based Automatic Part Search and Teaching function, and AI based; Automatic Parameter Optimization, Character Recognition (OCR), Foreign Object Detection (FOD), Placement Inspection Algorithms and an Automatic Defect Type Classification function.
Jun 15, 2021 | IPCs Connected Factory Exchange (CFX) standard defines communication between processes and devices for Industry 4.0. MIRTEC and Optel Software worked together to develop a CFX based interface between MIRTEC's AOI machines and Optel Software's MES system. The goal was to implement full AOI process control at test it at their mutual customer site, VIRTEX plant in Dallas, TX. The resulting CFX interface is vendor independent and will allow MIRTEC to interface with other MES systems, and Optel Software to interface with other AOI machines, with no changes.
May 31, 2021 | MIRTEC is pleased to announce that Dynamic Source Manufacturing, Inc. has selected MIRTEC's MV-6 OMNI 3D AOI machine to meet their high-quality manufacturing standards. The Award-Winning MV-6 OMNI is the perfect 3D Inspection Solution to enable DSM to achieve 100% customer satisfaction.
May 14, 2021 | MIRTEC announces that it has officially received IPC-2591 (CFX) Certification for its Award-Winning MV-6 OMNI 3D AOI Seriesand MS-11e 3D SPI Series.
Apr 08, 2021 | MIRTEC received a 2021 CIRCUITS ASSEMBLY NPI Award in the category of Test and Inspection – AOI for its MV-6Z OMNI 3D In-Line AOI system. The award was announced during a special online awards ceremony on Tuesday, April 6, 2021.
Mar 23, 2021 | MIRTEC is pleased to announce the appointment of Rui Gésero to Sales Manager for Germany, Austria and Switzerland. With almost 10 years of sales experience in the electronics manufacturing industry in his territory, Gésero is an important addition to the MIRTEC Germany team.
Feb 19, 2021 | MIRTEC announces that it has named Murray Percival Company as MIRTEC's Manufacturer's Representative Organization of the Year for 2020.
Feb 08, 2021 | MIRTEC is pleased to announce its participation in the 2021 IPC APEX Virtual EXPO, scheduled to take place March 9-11, 2021 online at www.ipcapexexpo.org.
Jan 17, 2021 | MIRTEC is pleased to announce that VEXOS has selected MIRTEC as their 3D AOI 'Partner of Choice' based on key performance indicators including Inspection Performance, Gage R$&R, Ease of Programming and Customer Support.
Jan 10, 2021 | MIRTEC announce that European Circuits Limited purchased an MV-3 OMNI Desktop 3D AOI Machine. The purchase was facilitated through Bentec Ltd.
Oct 27, 2020 | MIRTEC received a 2020 Mexico Technology Award in the category of Inspection – AOI Systems for its MV-6Z OMNI 3D In-Line AOI system. The award was announced during a Virtual Awards Ceremony on Monday, October 26, 2020.
Oct 19, 2020 | MIRTEC is pleased to announce that Niche Electronics & QCMS have selected MIRTEC's MV-6 OMNI 3D AOI machine to meet their ongoing commitment to flawless manufacturing quality. The Award-Winning MV-6 OMNI is the perfect 3D Inspection Solution to enable both facilities to achieve 100% customer satisfaction.
Oct 03, 2020 | MIRTEC received a 2020 GLOBAL Technology Award in the category of Inspection – AOI Systems for its MV-6Z OMNI 3D In-Line AOI system. This represents the 12th Global Technology Award presented to MIRTEC for its Technologically Advanced Inspection Solutions. The award was announced during a Virtual Awards Ceremony on Tuesday, Sept. 29, 2020.
Oct 03, 2020 | MIRTEC is pleased to announce that Energy Conversion Applications (ECA), Inc., a full-service EMS provider specializing a full range of turnkey and hybrid solutions for PCB assembly including custom cables & harness, coil winding and complete box build assembly, has selected MIRTEC as their AOI partner with the purchase of an MV-3L Desktop AOI Machine.
Sep 01, 2020 | MIRTEC today announced its participation in the SMTA International Virtual Conference & Expo. The Live Virtual Exposition is scheduled to take place Sept. 28-30, 2020.
Jul 22, 2020 | MIRTEC is pleased to announce that Check Technology Solutions has purchased an MV-6 OMNI 3D AOI machine to meet their ongoing commitment to flawless manufacturing quality. The Award-Winning MV-6 OMNI is the perfect 3D Inspection Solution to enable Check Technology Solutions to achieve 100% customer satisfaction.
Jul 07, 2020 | MIRTEC is pleased to announce that Gentec, a Québec-based design and manufacturing company specializing in rugged and reliable custom-made products and solutions in the fields of high-tech, power and power management electronics, has selected MIRTEC's award-winning MV-3 OMNI Desktop 3D AOI system. The MV-3 OMNI is the perfect 3D Inspection Solution to strengthen Gentec's commitment to uncompromised production quality.
Jun 30, 2020 | MIRTEC is excited to announce its participation in an exclusive ONLINE CONFERENCE & EXPO. The event will be broadcast live on Wednesday, July 8, 2020 from 10 a.m. - 2:30 p.m. EST and will include a full program of live presentations, interviews and special guests.
Jun 29, 2020 | MIRTEC is pleased to announce that VIRTEX has selected MIRTEC as its AOI business partner. MIRTEC's Award-Winning MV-6 OMNI is the ideal 3D Inspection Solution to meet the stringent quality requirements of VIRTEX's high-reliability customers.
Jun 18, 2020 | MIRTEC is pleased to announce that Out of the Box Manufacturing has purchased an MV-6 OMNI to meet their ongoing commitment to continuous process improvement. The Award-Winning MV-6 OMNI is the perfect 3D Inspection Solution to enable OBMFG to provide their customers with flawless manufacturing quality and consistent on-time deliveries all at a competitive price!
Jun 11, 2020 | MIRTEC is pleased to announce that SMT Northwest, Inc., a highly regarded EMS provider specializing in high-mix / low-volume, quick turn printed circuit board assembly, has selected MIRTEC as their 3D AOI partner with the purchase of an MV-3 OMNI Desktop 3D AOI Machine.
May 25, 2020 | MIRTEC is pleased to announce that CE3 Electronics Inc., a World-Class EMS provider specializing in advanced printed circuit board assembly and complex cable and wire harness manufacturing, has selected MIRTEC as their 3D AOI partner with the purchase of an MV-6 OMNI 3D AOI Machine.
May 18, 2020 | MIRTEC is pleased to announce that Integrated Test Corporation, a leading fabricator of ATE probe and final test PCBs, has selected MIRTEC as their 3D AOI partner with the purchase of an MV-7U OMNI Large Format PCB 3D AOI Machine.
Apr 11, 2020 | Increased capabilities in lab will support increased research and training opportunities in photonic
Mar 25, 2020 | After an extensive evaluation BOSCH has selected MIRTEC's 3D AOI Technology as the best solution to meet their ongoing quality initiatives.
Feb 25, 2020 | MIRTEC will exhibit at the SMTA Dallas and Houston Expo & Tech Forums. The Dallas Expo is scheduled to take place Tuesday, March 24, 2020 at the Plano Event Center in Plano, TX, and the Houston Expo will be held Thursday, March 26, 2020 at The Stafford Centre in Stafford, TX.
Feb 06, 2020 | MIRTEC is pleased to announce that it received the prestigious 2020 Service Excellence Award (SEA) from CIRCUITS ASSEMBLY magazine in the category of Test and Inspection. This is the sixth consecutive year that MIRTEC has received this award for outstanding customer service! Mike Buetow, CIRCUITS ASSEMBLY’s Editor-in-Chief, presented the award to Brian D’Amico, President of MIRTEC’s North American Sales and Service Division during a Tuesday, Feb. 4, 2020 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO.
Jan 15, 2020 | MIRTEC announces the expansion of its European Demonstration and Service Center in nearby Frankfurt, Germany. “This ambitious expansion of MIRTEC’s European ‘Center of Excellence’ will allow us to better serve our existing customers as well as effectively support increased demand for our award-winning inspection solutions throughout the extended European market (EMEA),” stated Chanwha Pak, CEO of MIRTEC Co. LTD.
Jan 10, 2020 | MIRTEC Co. LTD reports record sales revenue in 2019 for its North American Sales and Service Division. “Not only has 2019 been the most successful year in our corporate history,” stated Brian D’Amico, President of MIRTEC Corp, “it represents the ninth consecutive year of record sales revenue for our division. This is quite an accomplishment and an overwhelming testament to the integrity of our products and that of our personnel. It is truly a pleasure to work with such an outstanding team of engineering, sales and support professionals.”