Company Information:
Jul 04, 2012 | — IPC — Association Connecting Electronics Industries® invites experts to submit abstracts for the IPC Symposium on Lean for the Electronics Assembly Industry: Putting Theory to Practice.
Jul 02, 2012 | With more than 50 exhibitors and three-quarters of its show floor sold to date, IPC Midwest is geared up to deliver another very focused, regional event targeted solely to the electronics manufacturing industry.
Jun 29, 2012 | Electronic product and manufacturing trends continue to challenge both users and providers of test and inspection technologies at all levels of the supply chain.
Jun 27, 2012 | IPC — Association Connecting Electronics Industries® announced today the May findings from its monthly North American Printed Circuit Board (PCB) Statistical Program.
Jun 27, 2012 | IPC — Association Connecting Electronics Industries® announced today the May findings from its monthly North American Printed Circuit Board (PCB) Statistical Program.
Jun 23, 2012 | IPC – Association Connecting Electronics Industries® announces that IPC APEX EXPO® has been named one of the Trade Show News Network 2012 “Top 25 Fastest-growing Trade Shows in Attendance in the United States.”
Jun 19, 2012 | IPC — Association Connecting Electronics Industries® announces that Edward Trackman has joined the IPC staff as vice president of special projects.
Jun 15, 2012 | “Electronics in the Fast Lane: How High Speed Technologies are Changing the Game,” will be the theme of the IPC Executive Summit, August 21–22, 2012, in Schaumburg, Ill.
Jun 13, 2012 | On Tuesday, June 5, 2012, leaders of IPC’s Environment, Health and Safety (EHS) Committee met with senior U.S. Environmental Protection Agency (EPA) staff to discuss regulatory relief for printed board manufacturing.
Jun 11, 2012 | Opening Keynote speaker is in the hands of the electronics manufacturing industry. IPC is asking industry to decide who would be the ideal keynote speaker to kick off three days of inspiring information and knowledge at IPC APEX EXPO 2013, February 19–21, in San Diego.
Jun 11, 2012 | Opening Keynote speaker is in the hands of the electronics manufacturing industry. IPC is asking industry to decide who would be the ideal keynote speaker to kick off three days of inspiring information and knowledge at IPC APEX EXPO 2013, February 19–21, in San Diego.
Jun 09, 2012 | To help designers and board assemblers address the challenges of working with new materials and smaller, finer-pitch components, IPC – Association Connecting Electronics Industries® released the B revision of IPC-7525, Stencil Design Guidelines.
Jun 07, 2012 | Highlights Federal Regulations that Burden Electronics Manufacturers
Jun 01, 2012 | As chip speeds skyrocket and system sizes diminish, designers and manufacturers face new and complex challenges
May 30, 2012 | IPC Midwest Conference & Exhibition™ will highlight advances in assembly materials, assembly processes and reliability testing to help electronics companies address critical challenges in manufacturing defect-free, quality electronics
May 25, 2012 | IPC — Association Connecting Electronics Industries® announced today the April findings from its monthly North American Printed Circuit Board (PCB) Statistical Program.
May 23, 2012 | Joint Industry Guideline Provides Best Practices for Measuring the Strain on Boards and Components During Manufacturing
May 18, 2012 | IPC Midwest Conference & Exhibition. Participants will compete against each other to build a functional electronics assembly within a half-hour time limit to ultimately determine who the best-of-the-best is in the Midwest.
May 15, 2012 | IPC annual study provides data to EMS companies interested in comparing their key 2011 operating variables to those of other EMS providers by type of product.
May 15, 2012 | IPC Midwest will highlight the new technologies, materials and processes in electronics manufacturing to help engineers solve their challenges and work smarter.
May 10, 2012 | IPC is advocating changes to the draft SEC rule implementing Section 1502 of the Dodd-Frank Act that would lessen the burden on small manufacturing companies
May 10, 2012 | IPC is advocating changes to the draft SEC rule implementing Section 1502 of the Dodd-Frank Act that would lessen the burden on small manufacturing companies
May 04, 2012 | IPC – Association Connecting Electronics Industries® launched a survey today to measure the impact of a phenomenon known as “on-shoring” — the migration of manufacturing operations back to the Americas from overseas, in the electronics industry.
May 04, 2012 | As printed boards evolve and chip speeds increase, the use of microwave technology in commercial applications, such as cell phone towers and in military products, is expanding.
May 01, 2012 | New IPC President and CEO John Mitchell started his first week on the job at the association that, 55 years ago, helped a newly formed printed wiring board industry gain acceptance, strength and visibility
Apr 30, 2012 | The job of testing or demonstrating materials and process compatibility just became easier with the newly released IPC-9203,
Apr 27, 2012 | Following showers of praise at IPC APEX EXPO® 2012, the number of exhibitor contracts for the 2013 event is nearing double-digit growth over the same time last year. On May 22, IPC will begin the space selection process for the 2013 show in San Diego.
Apr 27, 2012 | PCB Technology Trends 2011, a new study published this week by IPC — Association Connecting Electronics Industries®, shows how the demands of miniaturization and high-speed technology are driving changes in printed circuit board (PCB) processes and materials.
Apr 27, 2012 | IPC announced today the March findings from its monthly North American Printed Circuit Board (PCB) Statistical Program.
Apr 12, 2012 | Flexible circuit technology is utilized in all market sectors, including military, telecommunications, medical and consumer products.
Apr 06, 2012 | When a component manufacturer discontinues a particular component, it creates a ripple effect throughout the electronics assembly industry, leaving EMS providers with myriad critical questions to answer.
Apr 05, 2012 | IPC's second annual Conference on Electronics Assembly: Soldering, Assembly & Inspection, held in Budapest, Hungary last month saw an increase of 21 percent in attendees and a 44 percent increase in exhibitors over its inaugural event last year.
Apr 03, 2012 | — IPC — Association Connecting Electronics Industries® invites researchers, academics, technical experts and industry leaders to submit abstracts for the 2013 IPC APEX EXPO® at the San Diego Convention Center in San Diego, Calif.
Apr 03, 2012 | BANNOCKBURN, Ill., USA, April 3, 2012 — IPC — Association Connecting Electronics Industries® announced the Japanese language release of the E revision of IPC-A-610, 電子組立品の許容基準. IPC’s most widely-used standard.
Mar 30, 2012 | — IPC — Association Connecting Electronics Industries® announced today the February findings from its monthly North American Printed Circuit Board (PCB) Statistical Program.
Mar 29, 2012 | Providing convenient and cost-effective staff development, IPC announces its 2012 spring webinars for April, May and June. Each one-hour webinar is focused on technical challenges facing the electronics manufacturing industry, offering companies a great opportunity to bring IPC technical information to a large number of employees at one time.
Mar 28, 2012 | IPC announces the appointment of John W. Mitchell as its new president and CEO,
Mar 28, 2012 | he industry standard that establishes the specific requirements for the design of flexible and rigid –flexible printed boards, IPC-2223, Sectional Design Standard for Flexible Printed Boards, has been recently updated to its C revision.
Mar 26, 2012 | Tin whisker growth, risk mitigation, detection and failure analysis will be the focus of the IPC Tin Whiskers Conference, April 17–19, 2012, in Ft. Worth, Texas.
Mar 22, 2012 | The long-awaited 2011 IPC International Technology Roadmap for Electronic Interconnections was released last month at IPC APEX EXPO® 2012. Published biennially, the IPC Roadmap serves as an authoritative guide to interconnect technological trends, providing a vision of imminent, innovative technology.
Mar 21, 2012 | For many designers and manufacturing personnel in the electronics manufacturing supply chain, IPC-AJ-820, Assembly and Joining Handbook, is the document of choice for all aspects involved in creating a PCB.
Mar 09, 2012 | IPC has issued a Call for Participation for the technical conference at IPC Midwest Conference & Exhibition™. The one show in the Midwest focused on printed boards and electronics manufacturing, this year’s event will take place August 22–23, 2012, at the Renaissance Schaumburg Convention Center in Schaumburg, Ill. Researchers, academics, technical experts and industry leaders are invited to submit abstracts on the materials and processes that contribute to the performance of printed board assemblies.
Mar 08, 2012 | Although global economic growth and electronics industry growth slowed in the fourth quarter of 2011, signs that the recovery is resuming in the USA is apparent, according to IPC’s quarterly report, Market Data Update, published last week. This winter 2012 edition reports the latest global and regional developments in the economy and the electronics industry, including selected findings from IPC's industry statistical programs and leading indicators.
Mar 07, 2012 | The Nominating and Governance Committee of the IPC Board of Directors presented nine candidates for election at the IPC Annual Meeting on Tuesday, February 28, 2012, in conjunction with IPC APEX EXPO® at the San Diego Convention Center. Three candidates were elected as board officers and will serve two-year terms beginning February 2012. Six candidates were elected as board directors and will serve four-year terms beginning February 2012.
Mar 07, 2012 | The electronic interconnect industry came together at IPC APEX EXPO® last week in San Diego, with the show reporting a 26 percent increase in attendance over 2011 with 4,915 conference and exhibit hall attendees. IPC reported that 407 exhibitors participated in the event, resulting in 8,963 total visitors.
Mar 07, 2012 | IPC bestowed its highest corporate honors to DDi Corp. and Flextronics. During luncheons held in conjunction with IPC APEX EXPO®, IPC awarded the IPC Peter Sarmanian Corporate Recognition Award to DDi Corp. and the IPC Stan Plzak Corporate Recognition Award to Flextronics. For many years, both DDi Corp. and Flextronics have consistently provided staff resources to standards development and other committee initiatives.
Mar 07, 2012 | IPC announces the election of Douglas Pauls, principal materials and process engineer, Rockwell Collins, to chair the IPC Technical Activities Executive Committee (TAEC) for a two-year term. Elected to the position by the chairs and co-chairs of all IPC standards groups, Pauls succeeds Mel Parrish of STI Electronics, Inc. who held the role for IPC’s top standards development oversight committee for the past two years.
Feb 28, 2012 | Since the "wild west" days of a relatively young printed circuit board industry when rules and infrastructure were not yet well established, Dennis “Denny” Fritz has been actively involved in IPC activities to help add structure, strength and vision to the industry. Today, he was honored with the IPC Raymond E. Pritchard Hall of Fame Award for his dedication and service to IPC and the industry. Presented at IPC APEX EXPO® in San Diego, the Hall of Fame Award represents IPC's highest level of volunteer recognition.
Feb 28, 2012 | IPC announced today the January findings from its monthly North American Printed Circuit Board (PCB) Statistical Program.
Feb 28, 2012 | IPC presented Presidents, Special Recognition, Distinguished Committee Leadership and Committee Service Awards at IPC APEX EXPO® at the San Diego Convention Center.