SUPPLIER: Recon Inc
Parker Domnick Hunter MIDIGAS6-C Nitr
Parker Domnick Hunter MIDIGAS6-C Nitr has been sold
Model: |
Parker Domnick Hunter MIDIGAS6-C Nitr |
Category: |
|
Model Year: |
2014 |
Condition: |
|
Location: |
North Carolina, USA |
Offered by: |
|
| Contact Supplier |
Domnick Hunter MIDIGAS6-C Nitrogen Gas Generator
- Flow rate: 113 SCFH of 99.99% purity N2 delivered at 87 psig
- Includes: buffer vessel, oxygen analyzer & flow verification device
- Inlet air required: 13 scfm at 115 psig into the generator
- Inlet air required: 16 scfm at 125 psig into the Pre-treatment dryer
- We recommend that any compressed air system be sized with a 20% buffer between the maximum requirement of the generator and the maximum capability of the compressor
- Inlet air quality: -40 deg F Pressure Dew Point is preferred for high purity applications
- Voltage: 110V/60Hz
- Ambient environment: Covered from direct moisture.
- Ambient temp: 41 to 85 deg F
- This is a brand new system that was never installed. It comes with valves, dryer (to guarantee clean dry air to unit) and the generator itself. It was to be used on a selective soldering system.
Additional equipment included:
- Pre-treatment air dryer
- Model DAS6/N2
- Includes three levels of filtration and a desiccant style air dryer
Company Information:
