Seamark ZM-R6810
Model: |
Seamark ZM-R6810 |
Category: |
|
Model Year: |
2017 |
Condition: |
|
Value: |
$ 9995.00 |
Location: |
Australia |
Offered by: |
|
| Contact Supplier |
Seamark ZM-R6810 Automatic BGA Rework Machine
Soldering takes place under the strictly defined conditions. Both sections of hot air gives the ability to configure up to ten steps per profile. Each step consists of growth, value, and maintaining the temperature for each step.
Split Vision System with high magnification, adjustable freely in the XY plane allows a precise positioning of mounted components on the board, using a prism system of integrated optics. This allows us to preview the bottom of the system and its position, relative to the board. In conjunction with micrometer position control board gives the accuracy, unattainable by the manual setting.
Control and monitoring of the soldering process is carried out via a USB connection to the computer, and included software is very intuitive and easy to use. On the monitor, there are five temperature charts shown in real time.
Machine service is carried out by the PLC Panasonic driver, which offers a number of features unavailable in simpler station models. The temperature control is done with help of 7 temperature sensors (3 built into the machine, 4 external ones).
There can be a two temperature sections set for an external sensors, which allows you to control the process of brazing and keep a J-STD-020D.1 soldering standards.
Station was equipped with an air distribution system from the tank under pressure. This solution allows you to connect the station to the nitrogen cylinder, which gives a better results by minimizing a contamination of the solder, effect of the surface tension and voiding.
At the solder profile, we set a position for the upper and lower head of a hot-air.
Three independent warm surfaces: the first and the second one is a hot air blower (direct heating chipset), and the third one is a quartz heater.
Company Information:
