JUKI JM 50 Insertion Solution THT
JUKI JM 50 Insertion Solution THT
Lowest cost
JUKI's JM-50 convinces with lowest entry costs for THT production when producing high-mix low-volume.
Recognition of various component heights
The new "Takumi head" has 4 nozzles and is equipped with a height-adjusting laser to optimize speed. This head can handle a wide range of components while maintaining the maximum speed.
Flexibility
New flexible feeders and new "Mini Chuck Nozzles" increase component range that can be handled at a time.
PWB size
1 time clamping 50 × 50 mm ~ 410 × 360 mm 2 times clamping 50 × 50 mm ~ 800 × 360 mm
Component Height
max. 30 mm
Component size
Laser recognition: 0603 (metric) ~ 50 mm (square) 3 D Sensor: 3 mm (square) ~ 40 x 25 mm
Insertion speed
Vacuum: *0.6 sec / part
*Under the conditions specified by JUKI
Placement accuracy
Laser recognition: ± 0.05 mm (3 σ) Vision recognition: ± 0.04 mm
Feeder capacity
Tape feeder in case of 8 mm tape: 56 (Optional Knock cyinder unit is required)
MRF-S Radial Feeder 18
(9 on each of Front and Rear side)
MRF-L Radial Feeder 14
(7 on each of Front and Rear side)
MAF-S Axial Feeder 14
(7 on each of Front and Rear side)
MAF-L Axial Feeder 10
(5 on each of Front and Rear side)
Power supply
200 to 415 V AC 3-phase
Apparent power
2.2 kVA
Operation air pressure
0,5 ± 0,05 MPa
Air consumption
75 L / min
Machine dimension (W × D × H)
1,454 × 1,505 × 1,450 mm
Weight (approx.)
1,300 kg
Mass of conveying
Maximum up to 2.000 kg
Specifications and design subject to change without notice.
.gif)
