Wavetek CLI-1750
Model: |
Wavetek CLI-1750 |
Category: |
|
Condition: |
|
Location: |
Florida, USA |
Offered by: |
|
| Contact Supplier |
Wavetek CLI-1750
Cable Leakage Signal Meter
Signal Level, Leakage & Home Wiring Test Kit JDSU CLI-1750 Designed for use by installers, the Wavetek/Acterna/JDSU CLI1750 and LST1700 are easy to use, portable, and economical solutions that perform a comprehensive set of tests to verify the quality of the installation.With these instruments, signal levels are checked to verify proper levels arriving at the tap and the house according to design and government regulations. Frequency response is measured to verify proper losses as a function of cable length, type, number of passive components, and to uncover any roll-off or sharp changes in response. A FDR test reveals precise location of sources of reflections, degree of severity, and enables surgical replacement of faulty cable or components, or repair of craftsmanship problems. A reverse ingress scan test shows the presence of noise or ingress generated in the home that hampers reverse communication for all customers sharing the node.A leakage test finds potential points of ingress because the source of ingress may not be in operation while the installer is at the house.
Highlights
Complete solution for installers eliminating the need for multiple meters or testers.
Combination signal level meter, leakage meter, and home wiring tester.
Easy-to-use, portable, and economical.
Comprehensive tests to verify the quality of an installation.
Icon-based user interface for ease of operation in all languages.
Applications
Signal levels are checked to verify proper levels arriving at the tap and at the house.
Frequency response is measured to verify proper losses and to uncover any roll-off or sharp changes in response.
Frequency Domain Reflectometry test (FDR) reveals precise location of sources of reflections and degree of severity.
Reverse Ingress Scan test shows the presence of noise, or ingress, generated in the house that hampers reverse communication for all customers sharing the node.
Leakage test finds potential points of ingress, as the source may not be in operation while the installer is at the house.
Key Features
Signal Scan mode shows all channel levels at once.
digiCheck(TM) digital signal average power measurement option.
Sweep and FDR mode finds cable, component, and craftsmanship-related faults.
Frequency agile leakage detection and measurement.
Pass/fail check ensures FCC compliance and reduces subscriber call-backs.
- See more at: https://www.testequipmentconnection.com/36352/Wavetek_CLI-1750.php#sthash.a8QJiDDt.dpuf
Company Information:
.gif)
