Testing Printed Circuit Boards for Creep Corrosion in Flowers of Sulfur Chamber

Published:

July 16, 2015

Author:

Haley Fu; iNEMI, Prabjit Singh, Levi Campbell, Jing Zhang; IBM Corporation, Wallace Ables; Dell Corporation, Dem Lee, Jeffrey Lee; iST-Integrated Service Technology, Jane Li, Solomon Zhang; Lenovo Limited Corporation, Simon Lee; The Dow Chemical Company.

Abstract:

Qualification of electronic hardware from a corrosion resistance standpoint has traditionally relied on stressing the hardware in a variety of environments. Before the development of tests based on mixed flowing gas (MFG), hardware was typically exposed to temperature-humidity cycling. In the pre-1980s era, component feature sizes were relatively large. Corrosion, while it did occur, did not in general degrade reliability. There were rare instances of the data center environments releasing corrosive gases and corroding hardware. One that got a lot of publicity was the corrosion by sulfur-bearing gases given off by data center carpeting. More often, corrosion was due to corrosive flux residues left on as-manufactured printed circuit boards (PCBs) that led to ion migration induced electrical shorting. Ion migration induced failures also occurred inside the PCBs due to poor laminate quality and moisture trapped in the laminate layers....

  • Download Testing Printed Circuit Boards for Creep Corrosion in Flowers of Sulfur Chamber article
  • To read this article you need to have Adobe PDF installed

You must be a registered user to talk back to us.

 
Company Information:

iNEMI (International Electronics Manufacturing Initiative)

iNEMI is an industry-led consortium focused on identifying and closing technology gaps, which includes the development and integration of the electronics industry supply infrastructure.

Herndon, Virginia, USA

  • Phone 703-834-0330
  • Fax 703-834-2735

iNEMI (International Electronics Manufacturing Initiative) website

Company Postings:

(3) technical library articles

(21) news releases

  • Apr 27, 2018 - Understanding the Heat Output of your BGA Rework Station | Precision PCB Services, Inc
  • Apr 27, 2018 - Hot Air vs. IR BGA Rework Stations | Precision PCB Services, Inc
  • Feb 22, 2018 - Hand Soldering with Lead Free Alloys | Metcal
  • Dec 07, 2017 - Utility of Dual Applicators for Non-Atomized Conformal Coating to Improve High-Volume Manufacturing Optimization | Nordson ASYMTEK
  • Nov 08, 2017 - Void Reduction in Reflow Soldering Processes by Sweep Stimulation of PCB Substrate | kurtz ersa Corporation
  • Browse Technical Library »

Testing Printed Circuit Boards for Creep Corrosion in Flowers of Sulfur Chamber article has been viewed 32 times

Plasma Prior to Conformal Coating

Benchtop Fluid Dispenser