Electronics Forum | Wed Oct 02 09:36:10 EDT 2002 | scottefiske
Dragon, Was recently responsible for No Clean Process/Material evaluation and implementation project. Shop was 100% Water soluble facility. Several Top Paste manufacturers were invited to participate. (3) were evaluated. All key variables were identi
Electronics Forum | Thu Jul 17 20:46:55 EDT 2008 | davef
Which type? * Solder beads (mid-chip solder balls, attached to the waste line of your chip caps and resistors) This is more paste volume related. * Solder balls that tend to be more randomly scattered (as in spattered)? This tends to be more profile
Electronics Forum | Thu Mar 01 08:55:35 EST 2001 | Dale Dolan
We are currently reviewing the stencil cleaning process in house, we curently use ISOPROPYL ALCOHOL followed by a rub down with non lint wipe alls ( not good !!).As for drying the screen's, the apertures are blown out with compressed air and left to
Electronics Forum | Fri Apr 13 22:56:02 EDT 2001 | gdstanton
I've been chipping away on a solder bridging and poor fillet wetting problem for a few weeks now (new to the company) and I found two issues. First, after a review of stencil inventory, I found apertures to be oversized when compared to suggested di
Electronics Forum | Mon Jun 18 10:14:30 EDT 2001 | surachai
HI ALL; I WOULD LIKE TO KNOW THAT ANYBODY CAN RUN GLUE PRINTING PROCESS WITH 0402 CHIP AND PASS THEM TO WAVE SOLDERING PROCESS ,PLEASE GIVE ME THE INFORMATION ABOUT THEM . 1)HOW WIDE OF APERTURE DO YOU OPEN ON YOUR STENCIL? 2)HOW MANY YIELD OF THIS P
Electronics Forum | Mon Nov 01 22:16:04 EST 1999 | Dean
Without a detailed description of the suspect parts It is difficult to pin-point the exact solution to your process problem. However, whenever possible avoid non-value added additions to your current process. Here is the reality of the situation:
Electronics Forum | Fri Feb 19 16:45:55 EST 1999 | Steve Gregory
Hello Ryan! There's a company called Camalot that sells dispensers that in my opinion, make one of the better dispensers on the market. They use what's called a rotary-positive displacement pump when dispensing... much more precise and accurate
Electronics Forum | Fri Mar 12 18:12:15 EST 1999 | B. Walton
Spray cleaners are poor alternatives to todays ultrasonic stencil cleaners. Ultrasonics are the way to go and you can use rather benign water based chemistries to get the job done. As for screening adhesives and cleaning glue residue with spray wands
Electronics Forum | Sat Jan 22 16:39:26 EST 2011 | eadthem
Your typical high mix line would consist of, Stencil printer, 1-2 foot conveyor belt, fast PNP machine (say a universal 30 spindle turret lightning head), 1-2 foot conveyor belt, large/heavy part PNP (say a universal flex jet 7 spindle or 4 Spindle),
Electronics Forum | Sat May 01 09:55:59 EDT 1999 | Bob Willis
| Hi all, | | We're starting up tests for pin-to-paste and, well, things could be better. We're testing different pastes and we're testing different apertures rules and, well, we're still testing. It's coming close and we're getting pretty good
