glue dispensing equipment Inductor Capacitor Potting Machine Automatic AB Glue Dispensing equipment, glue potting machine

glue dispensing equipment Inductor Capacitor Potting Machine Automatic AB Glue Dispensing equipment, glue potting machine Description:

glue dispensing equipment Inductor Capacitor Potting Machine Automatic AB Glue Dispensing equipment, glue potting machine

AB Glue Adhesive Automatic Toroidal Coil Inductor Dispenser Dispensing Machine meter mix dispensing potting machine

Potting Dosing Encapsulation resin meter mix dispenser

potting dosing encapsluation,glue dispenser,Meter Mix Systems, Metering, Mixing and dispensing , 2K metering, 2 part epoxy dispensing ,glue potting machine

115 articles

April 16, 2024

Open Immersive Reader

AB Glue Adhesive Automatic Toroidal Coil Inductor Dispenser Dispensing Machine meter mix dispensing potting machine

A transformer is a device used to measure voltage or current, mainly consisting of a coil and a magnetic core.

With the development of science and technology, the performance and accuracy of transformers continue to improve, and their application fields continue to expand, involving almost every industry in the national economy, mainly concentrated in electric power, power grid, rail transit, construction, new energy, metallurgy, petrochemical and other industries

Transformer is a very important component in the circuit. Its internal structure is relatively complex and contains a large number of wires and magnetic cores. If there is leakage or poor contact between these wires and the magnetic core, it will cause a short circuit or failure of the circuit, affecting the operation of the entire circuit system. Using an automatic glue dispensing machine to fill the glue can seal the wires and the magnetic core, improve the insulation performance between them, and avoid problems such as leakage or poor contact.

In the future, with the continuous development of smart grids, new energy vehicles, 5G and other fields, the demand for transformers will further increase. At the same time, the requirements for environmental protection, energy saving, consumption reduction and other aspects will also continue to increase, which will also promote Continuous innovation and development of transformer technology. KPD AUTOMATION has designed an automatic AB glue filling machine with a double barrel design for the potting requirements of transformers. Glue A and glue B are stored separately to ensure that the glue does not solidify after being placed for a long time; original anti-curing function; adjustable high viscosity The suction valve prevents glue from leaking and dripping; a heating device can be added, and a glue stirring device is equipped to prevent glue from settling; the ratio can be adjusted as needed to realize mixing and filling of glue at the same time, thus saving glue to the greatest extent; it has points, lines, and surfaces. , arc, circle and three-axis linkage functions, it can adapt to glue filling of any irregular objects; saving labor, one piece of equipment can reach the output of traditional 3-5 people!

Information about Meter Mixing/Dispensing Machines for 2-Part Polyurethane Casting Resins

Two-part polyurethane casting resin systems may be processed manually without using a dispensing machine.

However, for a higher production quantity and for some specialty applications, you may need to use a meter-dispensing machine to process the 2-part polyurethane casting resin materials.

Basically, a dispensing machine for 2-part polyurethane resin system has to:

• Feed the component materials to the pump

• Meter the materials at the correct ratio and send them to the mixing head

• Mix the two components

• Dispense the blended material

The dispense machine assembly parts for these functions have options for you to choose from. For example, if you want to mix dye, filler, or other additive, you may want an agitator and vacuum capacity in your feeding tank. If your ratio needs to be varied, you need to get a variable mixing ratio system and not a fixed ratio system. Your output and shot size determines the type and size of the pump and driving mechanism. If the component is very thick or solid at room temperature, you need the material heated in the machine. If the two resin components are difficult to mix, you may need to get a dynamic mixing system instead of static mixing system.

Each application is different, so the machine manufactures typically custom-assemble your machine based on your requirements. You will have to provide various pieces of information including these to your machine supplier in order for you to obtain a quote.

• Mixing Ratio

• Viscosity of Components

• Output rate

• Shot Size

• Filler Requirement

• Heating Requirement

• Other Specific Requirements

As mentioned earlier, your machine is likely to be customized for your specific requirement. You will need to work with the supplier for the setup, maintenance, repair, parts, and other issues for a long time. It is important that you select a machine supplier that you feel comfortable working with for a long term. Some manufacturers have direct sales people, and some of them primarily use distributers. The machine distribution companies often have engineering capacity to help setting up and deal with issues locally. KPD automation will be happy to work with your Please feel free to have them contact us for detailed questions as they need to.

About machine hotline/whatsapp +86 134 2516 4065

Email: gluepotting@gmail.com