High Frequency Transformer potting machine AB part epoxy dispenser Potting Compound machine for High Voltage Transformer

High Frequency Transformer potting machine AB part epoxy dispenser Potting Compound machine for High Voltage Transformer Description:

High Frequency Transformer potting machine AB part epoxy dispenser Potting Compound machine for High Voltage Transformer

Potting Dosing Encapsulation resin meter mix dispenser

potting dosing encapsluation,glue dispenser,Meter Mix Systems, Metering, Mixing and dispensing , 2K metering, 2 part epoxy dispensing ,glue potting machine

Potting transformer is same as standard transformer principle just covered with flame-retardant plastic and filled with epoxy or PU glue in the box. With an potting/encapsulated design, every component is protected against dust, lint, moisture, and corrosive contamination.

What Is Transformer Potting?

The transformer potting consists of a box and glue between the transformer and casing. The biggest advantage of the potting transformer is its convenient use, good environmental isolation, attractive appearance, and good heat dissipation. There are round enclosures or fill cases available for additional protection in harsh environments, and attractive uniform packaging is also available.

What’s Transformer Potting Meaning?

Potting is the process of filling or submersing a complete transformer using a compound material. Transformers can be bonded, sealed, potted, and coated with this glue.It is liquid before curing, and its viscosity varies with the material, performance and production process. Its use value is realized after the glue has completely cured, and it has many properties such as being waterproof, moisture-proof, dust-proof, insulating, thermal conductive, confidential, anti-corrosion, temperature resistant, and shock resistant.

What are there transformer potting Machine?

Potting compound for transformer is the material which we potting in the transformer. Several types of transformer potting material exist. In this article, we will introduce epoxy resin material, polyurethane material, and silicone material. Check our potting machine. Full automatic tranformer potting machine

Whatsapp+86 13425164065

The machine will have two tanks for keeping Liquid A & B separately.

There are two sets of metering pumps inside the machine, draining out liquids individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data .

Automatic glue mixing machine is mainly used for a two-component glue( Epoxy/ Silicone/PU,etc adhesive), automatic metering and mixing the ratio by two sets of high precision pumps, supply to a fully mixing design and then dispensing , dosing , dispensing the aimed products .

* Applications : 

Industry: Led screen , led display module , led panel , led sign board ,led ad , capacitor, power supply, transformer, ignition coil, reverse sensor, circuit board, electronic ballast,PCB boards, water pumps ,power supply and other electronic products and product or parts where want encapsulation &potting demanded.

Potting and encapsulation is the process of embedding products & assemblies in a liquid resin (potting compounds) to protect them against rough environment conditions. Potting can be performed in atmosphere pressure or even under vacuum, if high voltage insulation and high temperature differences are needed. Encapsulation of parts will stop corrosion of metals and reduce damage caused by vibration and mechanical stress.

We offer automatic ,se-mi automatic fluid dispensing potting machine and the related production line and vacuuming systems ..2 Part Silicone polyurethane epoxy potting dispensing machine AB Resins compound dosing , dispensing ,potting system ,2K potting

technology AB glue dispensing machine Epoxy dispensing machine Two-component dispensing machine,Dual-component dispensing machine Meter-mix dispensing machine,Resin dispensing machine Adhesive dispensing system,Dispensing robot with high precision Dispensing valve, Liquid dispenser , Automated dispensing equipment.

Introduction :

1. Working Mode: controlled by PLC module and MCGS touch screen.

2.High precision valve: high speed, glue off clean, no glue drawing, no dropping. 3. Core metering pump specially design for different material from low to high viscosities. 4. Mix glue A & B more evenly; no more or no less for agent B.

Working principle :

Compound materials A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine for metering A and B resin by setting ratio, draining out material individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.

Tank system technology:

1. Stainless panel vacuum pressure tank which can bear negative pressure of inner tank . 

2. Tank with motor stirrer that prevent the glue from sediment and keep the potting material in constant temperature.

 3 Tank with top/ high /low liquid sensors that ensure alarm warning when liquid higher or lower the setting level . 

4 Tank with vacuum degas (degas time can be set through touch screen), so the material can be re-feeding through vacuum negative pressure .

 5 Tank with pressure releasing ball valve ; the bottom of tank reserved back-flow connector and river closure ball valve.

6 Tank with heater which can preheat materials to assure good flowability .

 7 Tank with artificial feeding mouth that can be added glue appropriately by hand . 

8 Tank with silica-dryer which can prevent material especially PU from crystallization .

 Pump technology

1. Two cylinder plunger pumps work by durable motors. 

2.The biggest flow volume :24g/s,Repetition accuracy:0.2g. 

3.Also Suitable for high viscosity glue: 50cps~35000cps.

 4. Suitable for big flow dispensing or slight flow dispensing. 

5. Suitable for frequent start and stop dispensing. 6. Anti-wear, Anti-corrosion, super long life time.

Valve technology

1. Two cylinder plunger pumps work by durable motors. 

2.The biggest flow volume :24g/s,Repetition accuracy:0.2g. 

3.Also Suitable for high viscosity glue: 50cps~35000cps.

 4. Suitable for big flow dispensing or slight flow dispensing. 

5. Suitable for frequent start and stop dispensing. 

6. Anti-wear, Anti-corrosion, super long life time.

PLC Operation Controlling System

1 Dispensing volume is controlled by the speed of pump's motors ; Glue speed adjustable within the speed range . 

2 Machine with detecting function that detect the speed and running time of pumps to ensure the ratio reliability. 

3 Adjustable gluing-out volume make sure glue A/B dispense out at the same time from glue valve to get better glue mixing effect . 

 4 Machine with gel resistance calculator , which prevent the mixture curing inside . 

5 You can set single gluing-out and steady gluing-out function to meet up with your different process requirement . 

6 Whole machine system and function is controlled by Panasonic PLC and MGCS touch screen . 

7 Reserved PLC communication interface, which easy connecting with outside device . 

8 Equipped with a safety lock to prevent staff from wrong operation .

Application

1.Potting&Encapsulation &Casting: electronics compnonets , PCB board, Capacitor, power supply, transformer, ignition coil, reverse sensor, circuit board, filter products ,underwater parts, electronic ballast ,aviation parts, aerospace parts....

2.Dispensing&Dosing : LED strip , led lamp , led bulb , aluminum,led screen , display module ,medical parts,medical liquid filling .... 

3.Bonding&doming : LCD screen ,LOCA bonding,ABS plastic,different types of stickers , badge , keychains , souvenirs ,arts , photo frame , and other arts graphics....

Automatic AB Glue Epoxy Resin Dispensing Applicator Machine Glue Potting Machine 2K Dosing machine,adhesive dispenser machine Fully Automatic AB Potting Machine

Applicable material

1K and 2-component polyurethanes, epoxies, acrylics, silicones, temperature, humidity and UV curing materials. Two component potting materials , 2-part compound materials, AB part compound materials , 2K silicones ,2K epoxies resin, Bi-component PU, Ployerster, Polyurethane, UV materials and so on .

Sara Dong 

Sales Manager

0086 13425164065(whatsapp/wechat)
Wechat : 0086 134 2516 4065
Skype: dzyljy