2 component potting and dispensing in PCB housing 2k adhesive AB material meter mix dispenser machine
Company Information:
Name: |
2 component potting and dispensing in PCB housing 2k adhesive AB material meter mix dispenser machine |
Category: |
|
Offered by: |
|
2 component potting and dispensing in PCB housing 2k adhesive AB material meter mix dispenser machine Description:
2 component potting and dispensing in PCB housing 2k adhesive AB material machine
High accurancy meter mix screw valve support mini shot at 0.1gram with ratio 9:1 which means this machine is very accurancy at small volume since A requires 0.09gram while B requires only 0.01grams very tiny volume . It can combine with 3 axis motion platform, so just feel free to let me know your requriement .
This system is specially designed to handle dispensing and potting of medium and large-sized batches in production line. It combines all the advantages of the CNC systems plus a high-precision axis controller with attractive performance for the price. This makes it particularly suited for applying potting, seals as well as conformal coating of electronic assemblies and housing
Automatic glue mixing machine is mainly used for a two-component glue( Epoxy/ Silicone/PU,etc adhesive), automatic metering and mixing the ratio by two sets of high precision pumps, supply to a fully mixing design and then dispensing , dosing , dispensing the aimed products
Epoxies, silicones and polyurethane are among the most frequently used potting compounds. These can be applied to
PCBs,PCBA,capacitors,power electronics, LED lighting, sensors, and more.
OUR equipment with pre-heat functions that helps the pre-heat the AB compound in tank in advance to keep a good flow-ability.Good liquidity helps resin flow into product easily and evenly.
OUR machine with tank stirring vacuum degas functions ,which can help compounds to remove air bubble easily and arrived the good potting status .
Removing air bubbles is very important.Vacuum degassing remains a critical processing step. The best technique for vacuum degassing is referred to as "bumping degas" which is alternately pulling and relaxing a vacuum in 30- to 60-second cycles.
FEATURES AT A GLANCE
led glue bonding and sealing potting machine
1. Vacuum material-feeding system or diaphragm pump feeding system
2. High precision pump metering system
3. Dynamic/Static mixing system
4. Programming control system
5. Heating function
6,can design with 3 axis platform
7, support mini shot with ratio 100:10
304stainless steel tank
Meter mix pump
High-quality motion components
Working principle
The machine will have two tanks for keeping Liquid A & B separately.
There are two sets of metering pumps inside the machine, draining out liquids individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data .
PRODUCT SPECIFICATIONS
Models: |
KPD-500 Automatic Multifunctional Glue Potting Machine |
Suitable process: |
It can be used as a stand-alone machine or with the customer’s original assembly line to achieve on-line gluing. |
Proportion of glue: |
10:1 – 1:1 |
hybrid approach: |
Dynamic stirring mixing/static |
Machine Stroke: |
500x500x100mm |
speed |
X、Y axle 400mm/s |
accurate |
±0.05mm |
Programme stock: |
999 |
programmer |
Teach-In Programming |
metrological: |
High precision metering pumps |
control method: |
PLC+touchscreens |
input method: |
Touch screen + buttons + IO |
Appearance Material: |
Industrial square tube welding + 6061 alloy + cold rolled plate |
Drum size: |
A barrel 30L, B barrel 10L (can be customised) |
External Dimensions: |
1100×1350 X1600mm |
Gum flow rate: |
1–80g/5sec (customised large glue volume available) |
trajectory: |
Punching points, walking straight lines, curves, drawing circles, arcs, squares, and other irregular shapes. |
Supply Voltage: |
AC220V/50HZ |
00:0000:15
Successful Project
Electronics Potting
Besides printed circuit board PCB, there are many electronics components must be protected during operating such as transformers, coils, drivers, power supply units, chargers, motors and so on. Specific potting compound and system would be used to meet your
demand.
Plug and Cable Potting
Even the tiniest gaps in plug housings, connectors, and power supply units can be filled by potting masses. Potting materials for plugs and cables are flexible, highly water-resistant, mechanically stable, and tear-resistant.
LED Potting
Transparent or opaque potting systems protect LEDs from water, dust, and other atmospheric influences, enabling effective potting as well as optimal light scattering for spotlight. Additionally, our mixing and dosing system for LED potting avoids air bubbles and smears making optimal protection possible.
Filter Potting
Potting compounds are used to join end-caps of various kinds of filters, as well as for gluing and sealing filters to the filter frame. This provides a leakage-free sealing of the frames and allows for the filtering of clean air. Foamed potting for bonding the filter medium into the filter frame enables cost and weight reductions, also meeting the high-quality requirements.
Aquarium Water Pump
Aquarium Water Pump usually works in extreme environment: water, vibration and chemical (oil). As a result, potting compounds are designed to provide extremely low water absorption, good chemical resistance, and exceptional thermal conductivity.
Automotive Electronics
Electrical potting compounds are commonly used within the automotive industry, and with the rise of electric vehicles, they are increasingly important in both conventional automotive electronics and as part of ADAS systems. In particular, polyacrylate electronics potting materials deliver the ideal set of characteristics for use in sensors and other components regularly exposed to oil and grease.
More sucessful project
Potting in Every IndustryProtective potting layers benefit various manufacturing industries including electronics, equipment involving electronic components, or even filter and electrical plug & cable industries. Whatever your industry is, contact us for more detailed information.
1.Potting&Dispesing&Casting: electronics componnets , PCB board, Capacitor, power supply, transformer, ignition coil, reversesensor, circuit board, filter products ,underwater parts, electronic ballast ,aviation parts, aerospace parts....
Transformer , capacitance , power module , regulating plate ,protection module , generator , pressure package , soli relay ,fault indicator , Sensors , junction box , clutch , wave filter , water meter , boattery cover , rectifier and so on
.2Dispensing&Dosing : LED strip , led lamp , led bulb , aluminum,led screen , display module ,medical parts,medical liquid filling...
3.Bonding&doming : LCD screen ,LOCA bonding,ABS plastic,different types of stickers , badge , keychains , souvenirs ,arts , photo frame , and other arts graphics....
SIMILAR PRODUCTS
SALES AND SERVICE NETWORK
2 component potting and dispensing in PCB housing 2k adhesive AB material meter mix dispenser machine was added in Mar 2024
2 component potting and dispensing in PCB housing 2k adhesive AB material meter mix dispenser machine has been viewed 10 times
20 More Products from Kapton Automation Equipment (Guangzhou) Co., Ltd :