New Stock Multilin Card UR5FH

New Stock Multilin Card UR5FH Description:

#Contact#
Unik You
unik@cambia.cn
+86 18030205725

The main power source for the module is derived from the isolated +24 VDC power supplied by the PLC power supply. This voltage is routed through an inverter/regulator to produce the operating voltages for the module. This module also consumes 27 mA from the +5 VDC output of the PLC power supply. An LED at the top of the module’s faceplate is ON when the module’s power supply is operating. The module provides electrical isolation of externally generated noise between the field wiring and the backplane through optical isolation.

If the current source is reversed into the input, or is less than the low end of the current range, then the module will output a data word corresponding to the low end of the current range (0000H in %AI). If an input that is out of range is entered (that is, it is greater than 20 mA), the A/D converter will output up to full scale (corresponding to 7FF8H in %AI). 

Input protection for the module is sufficient to guarantee operation with reduced performance with up to 200V common-mode. The module provides electrical isolation of externally generated noise between field wiring and the backplane through the use of optical isolation

You May Also Need