Solder Dross Separation System
Company Information:
Name: |
Solder Dross Separation System |
Category: |
|
Offered by: |
|
Solder Dross Separation System Description:
Feeder system |
Heater |
220VAC/6KW |
Temp |
Room temp~350℃ |
|
Temp control mode |
PID+SSR /PID+SD+SSR |
|
Warm-up time |
5 min |
|
Solder residue capacity |
≦35KG(continuity) |
|
Mixing motor |
220VAC/100W |
|
Timing mode |
Gear timing |
|
Centrifugal mixing rev |
15 Rev/min |
|
Slope angle |
1~3° |
|
Separate system |
Heater |
220VAC/6KW |
Warm-up time |
8 min |
|
Capacity |
≦40KG |
|
Melt time |
around 30 min |
|
Separate motor |
220VAC/200W |
|
Timing mode |
Steady speed |
|
Rev |
5~15 Rev/min |
|
Slope angle |
1~3° |
|
Filtration |
Sieve separation |
|
Figuration system |
Inner figuration system |
|
Figration bath quantity |
24pcs |
|
Control mode |
Electro-optic control |
|
Cooling |
Inner forced cooling system |
|
General |
Dimension |
L*W*H=1500*1020*1420mm |
Start up power |
13 KW |
|
Normal working power |
≦6 KW |
|
Power requirements |
3 Phase/380VAC/50~60Hz |
|
Weight |
Approx: 380kg |
|
Cooler temp |
Room temp |
Product Description:
- The Solder Recovery System enables PCB manufacturers to recycle solder dross onsite directly afterwards the wave soldering process.
- EKT-SRS solder recovery system is designed to extract and purify solder from solder dross to reuse in wave soldering process so as to achieve cost reduction and environment conservation.
- EKT-SRS solder recovery (recycling) system owns National Utility Model patent, it saves up to 50% in solder costs in the wave soldering process.
Features of EKT solder recovery system:
- Easy operation, high efficiency and directly reclaim pure solder from wave solder machine;
- Uses no chemicals, radiation, additives or other toxic substances, separate pure solder with residual dross to respective containers continually and automatically;
- Lead-free, environment friendly;
- Operates with an integral filtration system– filtering smells and fumes;
- Tested by China Electronic Lab that the composition of recovered solder is exactly the same as the solder in your solder pot;
- Met SGS environmental requirement test ROHS regulation;
- Adopt microcomputer with PLC control, performance stable and reliable;
- Friendly and convenient interface for operator, user can switch English and Chinese freely.
Structure of device:
- Outside feeding system: convenient for operation and keep machine clean inside;
- Centrifugal filler mixing system: ensure continuous and homogeneous filling of solder mixture.
- Inner cooling system: fast cooling for recovered solder, reduce oxidation and improve efficiency;
- Residual dross bin: fast cooling, reduce heat transmission and fume pollution;
- Sealed separating system: with imported antiseptic titanium alloy and stainless steel NO.316, ensure reliable life cycle and quality.
- Collection of pure solder: automatically collect recovered solder into molding slot under control of electro-optic sensor and brake motor.
Solder Dross Separation System was added in Oct 2019
Solder Dross Separation System has been viewed 239 times
13 More Products from EKTION (SHENZHEN) TECHNOLOGY LIMITED :