HONEYWELL 51199932-200 Programmable Logic Controller

HONEYWELL 51199932-200 Programmable Logic Controller Description:

CONTACT: NANCY LIN

EMAIL:INFO@AMIKON.CN

SKYPE:ONLYWNN_1

TELEGRAM:+8618020776786

MOBILE(WHATSAPP): (+86)-18020776786

QQ :2851195456

AMIKON has supplied nearly 70 million inventory parts for customers worldwide. Whether it is a new spare parts, or outdated / discontinued parts, AMIKON is committed to the best cost, best quality and efficient way to allow enterprises to resume normal operation.

Packing & Delivery

• 100% full New! - Original Factory Seal !
• Warranty: 12 months!
• Package: Original packing with cartons.
• Delivery time: Shipped in 3 days after payment 

Best Quality Assurance:

• We only provide the original new items, 100% make sure the best quality!
• 2.1 year warranty GUARANTEE OF QUALITY (After Our Delivery Date).

FEATURED BRANDS WE OFFER:

• Control Systems  (DCS, PLC/SPS, CNC):  Panel Controllers,  HMI and Display Panels,  Industrial PC’s,  Drives ( Frequency Inverter and Servo),  Motors,  Power Supplies
• Rockwell: Allen-Bradley: ControlLogix 1756 series controller, CompactLogix 1769 series controller, SLC 500 1747 1746 series controller, PLC-5 1771 1785 series controller, ProSoft :MVI69/PS69/MVI56/MVI94/MVI71/MVI46/3150, ICS TRIPLEX trusted system
• ABB: AC800M series controller I/O module, AC800F series controller module, AC31 series controller module, 800xA series modules,  Bailey INFI 90 module, DSQC robot module spare parts, Advant OCS system spare parts, H&B Freelance
• Bentley Nevada : Bently 3500 Monitoring system, Bently 3300 Monitoring system, Proximitor, Eddy current sensor probe
• Schneider: Quantum 140 series :Modicon M340, Modicon Premium :CPU Processor Module,Communication module,etc
• Emerson Emerson: Ovation System DCS Card, DeltaV  system Dual Channel Redundancy Safety System, Redundancy Controller
• General Electric: IS200/DS200 series Excitation system card, IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module
• Invensys Triconex Card: Tricon System Card
• Invensys Foxboro: I/A Series System Module
• Honeywell: Alcont, Experion LS, Experion PKS, Experion HS, Plant Scape, TDC 2000, TDC3000, TPS
• Siemens (Siemens): Siemens MOORE, Siemens S5
• Yokogawa: CS3000 System CPU Controller Module, Analog Module
• Yaskawa:Robot Servo Controller, Servo Motor, Servo Drive.
• Rexroth Indramat: I/O module, PLC controller, drive module
• VIBRO-METER: VM600 MPC4 VM600 CMC16 VM600 IOC4T Vibration Sensor, Speed Sensor, Vortex Sensor, Monitoring System Module Gateway Communication Module.
• EPRO(Philips): PR6422 / PR6423 / PR6424 / PR6426 Eddy current sensor, PR9268 series of electric absolute vibration sensor,MMS6000 system.
• Motorola: VME 162, MVME 167, MVME1772, MVME177 and other series.
• XYCOM: I / O, VME boards and processors
• Woodward: SPC valve position controller, 505 / 505E (9907-162,9907-164,9907-165,9907-167) digital controller, 2301A controller 9905series,2301D-ST series
• Rosemount: pressure transmitter, flow meter.

HONEYWELL 51199932-200 Programmable Logic Controller

HONEYWELL 51199932-200 Programmable Logic Controller

HONEYWELL 51199932-200 Programmable Logic Controller

The Carbon and Dewpoint selections will automatically set the first input actuation to
Carbon. The Oxygen selection will automatically set the first input actuation to Oxygen. Input 2 can be
any input actuation, but it is normally a type K, R or S thermocouple input, depending upon the probe type
selected. All calculations are performed by the Controller with Percent Carbon shown as the PV display.
The actual value of each analog input may be viewed on the lower display. For all Carbon Types, if the
value of Percent Carbon falls below 0.1% - such as can happen when the Carbon Probe voltage output
falls below 900 mVdc – then the Controller will continue to update the PV display, but the accuracy is
unspecified. Likewise, if the measured temperature falls outside of the specified ranges as noted above
for the Carbon, Oxygen and Dewpoint input types, then the Controller will continue to update the PV
display, but the accuracy is unspecified. For the Dewpoint algorithm, if the Carbon Sensor voltage falls
below 800 mVdc, then the Dew Point is calculated as if the sensor voltage was at 800 mVdc.
 
regardless of whichever SP is active.
NOTE 4. Loop Break monitors the control loop to determine if it is working. When enabled, the control
output is checked against the minimum and maximum output limit settings. When the output reaches one
of these limits, a timer begins. If the timer expires and the output has not caused the PV to move by a predetermined
amount, then the alarm activates, thus signalling that the loop is broken. The loop break timer
value must be configured by the operator as the AxSx VAL entry. This value is in seconds with a range of
0 to 3600 seconds. A setting of 0 is equivalent to an instantaneous loop break when the output reaches
one of its limit values.
The amount of PV Movement required is determined by the “UNITS” setting in the Display Setup Group.
For the Degrees F configuration, the PV must move by 3° in the desired direction in the time allowed. For
the Degrees C configuration, the PV must move by 2° in the desired direction in the time allowed. For the
“NONE” selection, the PV must move 1% of the PV range in the time allowed.
Loop Break alarms do not have a HIGH/LOW State configuration, they are always assumed to be a HIGH
state alarm.
NOTE 5. Thermocouple Warning means that the instrument has detected that the Thermocouple Input is
starting to fail. Not valid for other input types.
NOTE 6. Thermocouple Failing means that the instrument has detected that the Thermocouple Input is in
imminent danger of failing. Not valid for other input types.
NOTE 7: For the Digital Input selections, DIG INP1 can be either enabled or disabled in the Options
Group (See Sub-Section 3.11), but DIG INP2 must be enabled in the Options Group for the alarm to
function properly. 

TAMAGAWA OSE5K-6-12-108 

FANUC RACK A02B-0228-B505 

Hirata Servo Amplifier PY0A150E0XXYPH1

OKUMA E4809-045-217-C  PS60  BOARD S/N: 1911-2890-16-031

ALLEN BRADLEY 190S-BNDJ2-CC16C /B 190SBNDJ2CC16C

FANUC CARD A20B-0006-0232 /04C A20B00060232

FANUC A20B-0005-0700/03B A20B00050700 

OKUMA E4809-747-005-A  PPS-60C

SEALED ALLEN BRADLEY 150-C3NBD /B 150C3NBD MFG 2013 

FANUC PMC-NB BOARD CARD A16B-2201-0811 /04B A16B22010811

FANUC A16B-1210-0590/03 A16B12100590 

CHARMILLES BOARD M8631

MITSUBISHI BN624A780G52 MC231C 

Allen Bradley 20-COMM-B /A 20COMMB BACnet COMM. MODULE PF70-700

FANUC A20B-0006-0040/05C A20B00060040

OKUMA KEYBOARD EU-AIC0827 

OKUMA E0227-702-005  OPUS 5000 4Mbit 

OKUMA BOARD E0241-653-096 

Yaskawa CIMR-PCD20P1 

MITSUBISHI DC  HD30ET-025 

OKUMA SERVO DRIVE E4809-747-005 

MITSUBISHI NTSA-01-DWC BOARD BY172B121G52 /A BY172B121G52

MITSUBISHI RACK/CHASSIS FCA320M-V 

FANUC A14B-0076-8004A14B00768004 

KURODA PC-1024CZ-WYFPC1024CZWYF 

ALPHA GETRIEBEBAU  GTS075-M02-020A03 

FANUC A20B-0005-6290A20B00056290 with A20B-0005-0540 /04B

GENERAL ELECTRIC 5KH36KNB7633X 

Fanuc A16B-1000-0100/03B 

DANA SUMMIT  DRIVE 214-075-61 21407561 W/ GLENTEK GA4559-3

Allen Bradley Powerflex 70 20AD3P4F1AYNNNNN /A 2HP

YASKAWA AB12C-0112  JZNC-I0P02E-1

TEKNIC SDT-3000-829 

VEXTA PH2610-01B-C16PH261001BC16  MOTOR w/ D6CL-6.3 

BOSCH  B830303451

YASKAWA AB12C-0291 

CONTROL TECHNIQUE STDR31 

YASKAWA MOTION CONTROL BOARD JANCU- MCP02B-1 /D00 JANCU-MCP02B1

ALPHA GEAR REDUCER SP 075S-MC1-5 -1E1-2K SP075SMC151E12K 5:1 RATIO

FANUC A14B-0076-B002-01 A14B0076B00101 with A16B-1600-00907/03A A16B160000907

OKUMA E4809-436-014-A E4809436014A OPUS 5000 II 

YASKAWA JANCD-I004C JANCDI004C MOTORMAN I/O BOARD DF8203751-A0

FANUC INTERFACE MODULE A03B-0807-C173

OKUMA E7191-292-325-1 E71912923251 OPUS 5000 9A 

OKUMA E4809-045-205-A E4809045205A OPUS 7000 

FANUC A80L-0001-0273-03 

FANUC CARD A20B-2900-0380 /05C A20B29000380 

FANUC PMC-NB BOARD CARD A16B-2201-0851 /01A A16B22010851

FANUC CARD A20B-2900-0281 /01A A20B29000281

FANUC A16B-2200-0941/05A A16B22000941 

BOPPREL MILANO CIRCUIT BOARD 93709093

OMEAGA GLENTEK  SMA9915-002-000-1 

Allen Bradley PowerFlex 70 20AD2P1A0AYNNNNN /A

FANUC SANYO DENKI 2301C 

FADAL GRAPHICS BOARD1420-1A 

MURATEC RELAY BOARD Z90-30738-50 Z903073850 W/ MC8-C0080-600 & RYBD-16

BISON 507-01-107 

GENERAL ELECTRIC BOARD 44A497061-G01 44A497062-G01 44A497065-G03 44A497068-G01

MATRIX PC COMM BOARD ICOM-8 

CONTROL TECHNIQUE C80043 REV 3.00 

FANUC CARD A20B-0005-0700 /04C A20B00050700

FANUC A20B-0005-0730/03C A20B00050730 

FANUC ISB UNIT A05B-2308-C370 /01A A05B2308C370

OKUMA E4809-032-496-D  OPUS 5000 

MITSUBISHI IAPA-01-G BY172B112G51 /A BY172B112G51

CHARMILLES BOARD 853452 

CHARMILLES BOARD 853438 

Allen Bradley PowerFlex 70 20AD1P1A0AYNNNNN /A .5HP

SANYO DENKI 27BA050FXTH2 

FANUC A16B-1212-0720/01A A16B12120720 

TELEMECANIQUE  ATV11HU05F1U

COSEL PCM75E-2 

NEMICON MANUAL PULSER OSM-01-2GAZ9-M13 

FANUC A06B-0113-B708#0004 A06B0113B708AC 

CONTROL TECHNIQUE STDR37 SM I/O PLUS

ALLEN BRADLEY 1394-AM03 /B 1394AM03 AC 

CONTROL TECHNIQUE STDR36 SM I/O PLUS

FANUC A06B-0113-B708#0004 A06B0113B708AC 

MITSUBISHI A65B MELSEC 

FUJI FVRO.4E9S-2 

PARKER COMPUMOTOR 57-51-MO-DS23  SERIES 57-51

ALLEN BRADLEY 2094-AMP5 /A 2094AMP5 

NEW MITSUBISHI A68B MELSEC 

ALLEN BRADLEY 2094-PR8 /A 2094PR8 8-AXIS

OKUMA FUB-P4R2 FUBP4R2 OPUS 7000 BOARD CARD E4809-045-174 S/N: 1911-2342

Allen Bradley 20-COMM-C /A 20COMMC