8-zone Reduced-Length Lead-Free Convection Reflow Soldering System

8-zone Reduced-Length Lead-Free Convection Reflow Soldering System Description:

8-zone Reduced-Length Lead-Free Convection Reflow Soldering System

Introductions: 
The mainly component is adopted international brand one. Temperature can warm up quickly and keep stable, High effective can save Electronic It is adopted in jointing the BGA and CSP component. 
Special oven inner design has a heat insulation system, The electronic cost is the lowest of this filed. (A common one will cost 15KW/Hour.Our A8 just 8.5W/Hour).That will save 40%; If the equipment works for 24 hours, that will save 50 thousand CNY per year.

Our own research software system has strong functions and work at a stable situation. It is to be said the best software in this industrial. The PCB board is supervised, and the result will be analyzed and recorded.
Controlling the room by PID independently, can check the temperature and analysis the data, and then transfer the result to type.
Warm up quickly, from room temperature to work temperature only need 20min..
Imported high quality motor which can bear high temperature and high speed. The wind is calm and the sound is small.
The Guideway is made from good aluminum alloy, It has high hardness and can’t transfiguration easily.
When the power off, this machine can still transport PCB board out and can make no damage to it.
The oven inner is stainless to keep the PCB board clear when soldering it.
Auto supervision to show the working situation ;
Special wind wheel design to make the wind speed stable.
Pump air cooling system area is wide and the cooling effect is perfect.
Circle water cooling speed is quickly and the tin ball is bright.
Nitrogen content calculator can tell you the flux at any moment.

Specifications:

Heating -zones：8 heating-zones,16 heating, 2 cooling

Heating length：2900mm

controlling area：room temperature to 360℃

Controlling accuracy：±1℃

difference in temperature：±2℃

calefactive time：≤20min

cooling way：compulsion cooling air(can choose water cooling)

PCB size：50-400mm;can be made to order(max 500mm)

PCB transportation height：900±20mm

transportation way：Chain and net tape to transport

transportation direction：L-R (can choose R-L)

transportation speed：0-1800mm/min

Chain’s wide range：50-400mm;Can be made to order

net tape width：520mm

power off protection：UPS for Conveyor & PC

power supply：AC 380V 50Hz

abnormity alarm：temperature abnormity alarm

normal/start power：11/55 kw

dimension：4950L*1360W*1600H

net Weight：1800kg

Nitrogen protection

can add configuration

density

cost of Nitrogen

 configuration listing

controlling system:SIEMENS? CPV,SIMA temperature controlling panel.(Also can choose the Torch researched )

software:researched by Torch

computer:above P4 of HP and Levovo `s configuration,15 inch LED screen.

without-electricity switch:French Schneider

solid-state relay:Taiwan fotek (can choose Korea Deke)

intermediate relay:Japanese Omron

fuse:CHNT

single without-electricity operates:French Schneider

transportation motor:PANASONIC

circulation? motor:Taiwan Sanyue

heater:LONG SHENQ ELECTRONIC,shelf life is 100 thousand hours.

transportation motor:Korea SPG

UPS:Taiwan APCUPS

transducer：Taiwan Motor

wire：high temperature international standard wire

temperature test sense organ and connector：OMEGA USA OMEGA

Conveyor  Lead-free hot air relow oven with 8 heating zones R800:

FAQ:

1): What's the way of shipping?

 Answer: These are all heavy machines; we suggest you use cargo ship. But components for mending the machines, air transportation would be fine.

2): What's your way of packing the machines?

 Answer: We use Plastic film to wrap the machine, then use Wooden cases to ensure its safety.

3): Do you have oversea after sale service?      Can we offer the technical support?

 Answer: Yes, we can offer technical support abroad. If you have any technical problem, we will send our engineers to your country. 

 4): Is it hard to use these machines?

 Answer: No, not hard at all. After you buy our machines, you can send your engineers to our company, and we will train them how to use these machines. For our previous clients, at most 2 days is enough to learn to operate the machines.

 5): What is the terms of payment? What about the trade terms?

 Answer: T/T, L/C are ok. You can choose FOB Beijing/Tianjin. 

 6): Does your machines have quality certificate? How can I trust your products?

Answer: All of our machines have passed CE certificate, ISO14001(BCC), ISO9001(IQNET) and have own patent. Our company has entered markets in USA, Brails, Mexico ,Iran,Venezuela ,Asian market , and have established good cooperation with clients there.