70KV 2mA Negative X-ray tube power supply

70KV 2mA Negative X-ray tube power supply Description:

Product Name XFL
Power（W） 75W-200W,
Output Voltage(KV) ,20,25,30,35,40,50,60,65,70,80,90,100,120,125,130,150,160,

Wisman's XFL Series of regulated X-ray power supplies offer output voltages to130kV and incorporate a filament supply which provides  regulated  AC  current  adjustable between 0.3A and 5A at 0-10V.High voltage and filamentcurrent can be linearly ramped up. The XFL incorporates local and remote programming,monitoring,safety interlock,short-circuit and overload protection.

TYPICAL  APPLICATIONS：
Plastics Sorting, Crystal Inspection,Plating Measurement ,Diamond Inspection,Mineral Analysis,X-Ray Fluorescence,X-Ray Diffraction.

OPTIONS：
LR(X)        Low Ripple  0.25%、0.006%、0.003% 、0.001%
USB          USB2.0 Interface          
RS232        RS-232 Interface
RS422        RS-422 Interface
DC60         Input  +60Vdc±10%, 5.0A

SPECIFICATIONS：
Input: +48Vdc±10%, 6.25A maximum.
Output: 0 to 160kV at 0 to 2 mA,limited to a maximum of 200watts.
Voltage Control:
        Local:  Internal multi-turn potentiometer to set voltage
                   from 0 to full output voltage.
        Remote: 0 to +10Vdc proportional from 0 to full output
                       voltage.
        Accuracy: ±1%. ZIN: 10Mohm.
Emission Control:
         Local: Internal potentiometer to set beam current between 0 and full output.
         Remote: 0 to +10Vdc proportional from 0 to full output
         current. Accuracy : ±1%. ZIN: 10Mohm.
AC Filament Supply:
         Current:  0-5A, adjustable Voltage:  0-10V
Voltage Regulation:
       Load: 0.01% of output voltage no load to full load.
         Line: ±0.01% for ±10% change in input voltage. 
Current  Regulation:
         Load: 0.01% of output current from 0 to rated voltage.
         Line: ±0.01% for ±10% change in input voltage. 
Ripple:
         0.1% p-p of output voltage.
Temperature Range:
         0℃to +50℃ operational
Temperature Coefficient:
         25ppm/ ℃, voltage or current regulated.
Stability:
         ≤25ppm/hr after 1/2 hour warm-up.
Voltage and Current Monitors:
         0 to +10Vdc proportional  from 0 to rated output.Accuracy ±1%.
Cooling:
         Free convection for P≤100W, Fan (30CFM) assisted
         for P>120W，except 40KV。
Dimensions:
         1-40KV: L:166mm，W:120mm，D:120mm；
         50-70KV:L:230mm，W:100mm，D:140mm；
         80-100KV:L:405mm，W:190mm，D:155mm；
         110-130KV:L:460mm，W:210mm，D:175mm；
         140-160KV:L:515mm，W:230mm，D:195mm。