IN-CIRCUIT TESTER PMP-818S

IN-CIRCUIT TESTER PMP-818S Description:

IN-CIRCUIT TESTER PMP-818S

Feature
▶Phase measurement technology
▶Optocoupler  measurement technology
▶Current measurement technology
▶Multiple points measurement
▶Isoelectric separation point automatically
▶High voltage detecting and discharging technology
▶Circuits of R, L, C components value measurement
▶16 input/output GPIO port.
▶Diode measuring（diode、Zener diode）
▶Transistor measurement（Bipolar transition、Field effect tube）
▶Capacitance measuring polarity（Leskage current measurement method；TSET JET to test tantalum capacitors polarity）
▶JET SNS Test-Technology（Measurement the weld of connector；SMT component pin open circuit measurement）

What does an in-circuit tester do?

In-circuit test performs a “schematic verification” by testing individual components of a printed circuit board (PCBA) one at a time by comparison against a software model of some parameters of the component.

PMP-818S Based on the static test of the PMP-816S In-Circuit-tester, it is a test equipment that adds power-on to test the various functions of the product.
1.AVR Power supply output Products, provided Constant pressure limiting current, Guarantee product.
2.Boundary scan technology
  High integration high dense circuit board，Less needle point，Utilize boundary scan technology to test Microprocessor、DSP、FPGA、ASI and CPLD, Judgment IC performance and pin solder conditions.


3.LED color & brightness test
  Measurement system can achieve fast dynamic test LED color and brightness.Designed for LED and LCD test device.
4.On site management and remote assistance
  •Test data stored in the enterprise server
  •Managers can know produce situation online at any time
  •Products efficiency analysis to improve quality
  •Connect outer net assist engineer to do PM&RM, improve 
   production efficiency.


5.Parallel data and serial communication testing
  Parallel data test for analog-to-digital conversion IC (DDS, AD, DA), Data bits detection and welding conditions, Serial communication of the whole circuit test.

System specification
Test Pin Point:Standard Configuration：256 Point, Max extension 768 point
system:XP/WIN7/WIN8/WIN10
Power Spec:AC100V-120V ,200V-240V/50HZ-60HZ/350
Test Method:Manual press type, manual fixture type, automatic type
Test item :    maximum：100,000,Setps

Simulate hardware
AVR( DC voltage source):0---+/-10V     Precision: 5mV
AVR (DC current source):max:100mA    precision: 10uA-1mA
AVR (AC voltage source):10Hz---1MHz     precision: 1Hz-10Hz
DC voltage test:0---+/-100V    precision:3mV-50mV
DC current test:10uA---200mA     precision: 1uA-1mA

Optional
Open testing TESJET technology:Update measurable smaller IC and connector
Frequency test:max 200MHz     precision: 1Hz-50Hz
LED color and light measurement module
Audio analyzer: Audio analyzer and Signal to Noise ratio、THD and THD + N analyzer
Support external EPROM, electronic load and oscilloscope.

DUT power module
1 set High voltage DC constant current power supply: 10uA-100mA/100V(MAX)
1set High voltage DC constant voltage power supply: 10V-100V/100mA(MAX)