Low Cost Surface Mount Carriers

Company Information:

Dedicated to the design and manufacture of fixtures to improve speed and quality in the assembly of printed circuit boards. Providing solutions that challenge the industry's accepted "rules of thumb" for more than 25 years.

Blairstown, New Jersey, USA

Manufacturer

908-362-5588
908-362-5115

See Supplier Website »

Company Postings:

(14) products in the catalog

Name:	Low Cost Surface Mount Carriers
Category:	Board Handling - Pallets, Carriers, Fixtures
Offered by:	MB Manufacturing

Low Cost Surface Mount Carriers Description:

The low cost surface mount carrier used to hold PCB’s in place without tooling pins. The composite fixture is engineered to use flexible tabs that press the edges of the PCB into an accurate location. With downward pressure and nothing above the PCB allowing a complete processing of the PCB, screen printing through reflow.

	Surface Mount Carrier for Screen Printing through Reflow The Surface Mount Carrier for Screen Printing through Reflow shown here comes with a removable hold down bars. All hardware is captive. Spring loaded plungers on this SMT carrier can be locked in a retracted position, and then lowered onto the SMT device after the crossbars are attached preventing the risk of tilting components.
	Surface Mount Fixture with an SMT Connector Hold Down Unique clamp on 1 side. The clamp uses 2 fixed pins and a spring plunger to hold the PCB in place. The spring plunger tension is adjustable. This process carrier can run through screen printing, pick & place, and reflow.
	SMT Pallet Features 2 fixed pins and 4 low profile spring loaded hold down clamps; all of the components are flush with the top of the PCB during screen printing. When you press the pallet down on a flat surface; it activates the hold down clamps for pick & place and reflow.
	SMT Carrier with Titanium Corners 2 fixed pins and 2 spring loaded pins to hold a flex circuit in place for screen printing, pick & place, and reflow. The corners of the process carrier are titanium to prevent corner damage.
	Surface Mount Fixture with an SMT Connector Hold Down 2 fixed pins flush with the top of the PCB allowing for full SMT processing. The removable crossbar features spring plungers that lock in the "up" position for loading. This particular unit holds 4 SMT connectors in place during the reflow process.