CyberOptics Corporation

CYBEROPTICS is a global leader in high-precision 3D sensors that significantly improve yields and productivity in the 3D scanning and metrology, Surface Mount Technology & Semiconductor Markets

Inspection

Loading the player...

CyberOptics' Breakthrough 3D Sensor with Multi-Reflection Suppression Technology

The Global Technology Leader in High Precision 3D Sensors

CyberOptics sensors are being used in general purpose metrology and 3D scanning, surface mount technology (SMT) and semiconductor markets to significantly improve yields and productivity. By leveraging its leading edge technologies, the company has strategically established itself as a global leader in high precision 3D sensors, allowing CyberOptics to further increase its penetration of its key vertical segments.

Headquartered in Minneapolis, Minnesota, CyberOptics conducts worldwide operations through its facilities in North America, Asia and Europe.

CyberOptics 3D Sensors

CyberOptics Corporation Postings

12 products »

SQ3000™ Fastest 3D AOI In the Industry

The Ultimate in Speed and Accuracy. SQ3000 3D Automated Optical Inspection (AOI) system maximizes ROI and line utilization with 3D multi-view sensors that enable fastest 3D inspection in the industry. SQ3000 incorporates Multi-Reflecti...

Inspection

SQ3000™ Fastest 3D AOI In the Industry

QX600™ Ultra-Fast, Ultra-Versatile AOI

The QX600™ is designed with an all-new SIM (Strobed Inspection Module) with enhanced illumination – delivering the best 01005 and solder joint inspection performance ever. With a higher sensor resolution (12 µm), you ge...

Inspection

QX600™ Ultra-Fast, Ultra-Versatile AOI

QX500™ High-Speed AOI

Optimum Performance At Astonishing Speed. The multi-award winning QX500™ embraces CyberOptics unique image acquisition solution – Strobed Inspection Module (SIM) and is capable of inspecting 01005 comp...

Inspection

QX500™ High-Speed AOI

QX250i™ Fast, Flexible, High Performance AOI

Simultaneous Double Sided Inspection System The QX250i™ AOI system offers fast, flexible and high performance inspection for all applications and is ideally suited for pre-reflow and selective solder inspection. The top and botto...

Inspection

QX250i™ Fast, Flexible, High Performance AOI

QX150 Tabletop AOI System With In-Line Performance

Ideal For High-Mix, Low-Volume Environment. The QX150™ is powered by an all-new SIM (Strobed Inspection Module) with enhanced illumination – designed to deliver true, in-line inspection performance. The SIM enables on-the-f...

Inspection

QX150 Tabletop AOI System With In-Line Performance

QX150i Flexible 2D AOI

High Value, Flexible Inspection For All Applications. The QX150i™ AOI system offers high value and high flexibility for all applications and is ideally suited for pre-reflow and selective solder inspection. The Strobed Inspection...

Inspection

QX150i Flexible 2D AOI

SE600™ High Performance 3D SPI

Ultimate Precision Accuracy With World-Class Usability. The SE600™ – CyberOptics’ flagship SPI system, is the most advanced, high performance system ever. SE600™ brings together best accuracy and world-class usa...

Inspection

SE600™ High Performance 3D SPI

SE500ULTRA™ High-Speed 3D SPI

World-Class Accuracy At Fastest Speed. The SE500ULTRA™ system is power-packed with 30% more speed, newly designed V5 series software enabling world class user experience and optional dual illumination sensor. An all-new...

Inspection

SE500ULTRA™ High-Speed 3D SPI

SE500-D™ Dual Lane 3D SPI

Largest Board Capability With Flexible Conveyor Configuration. The SE500-D™ Dual Lane 3-D SPI System takes solder paste inspection to the next level with its flexible conveyor setup design and large board capability comparable wi...

Inspection

SE500-D™ Dual Lane 3D SPI

SE500-X™ Fastest, Most Accurate 3D SPI (Large Board)

With SE500-X™ - 100% 3D solder paste inspection system, CyberOptics pushes inspection speed to the highest level possible. The SE500-X™ is capable of inspecting the most demanding assemblies with 80cm²/sec inspection spe...

Inspection

SE500-X™ Fastest, Most Accurate 3D SPI (Large Board)

See all products from CyberOptics Corporation »

3 technical articles »

Return on Investment of a Pre-Reflow AOI System

Jun 30, 2015 | CyberOptics Corporation

This paper describes the losses from defects at the placement process in the SMT line. Two case studies of European and Taiwanese SMT manufacturers illustrate the actual losses from their defects. An evaluation method to select a pre-reflow AOI system maximizing the return on investment (ROI) is introduced. In the end, ROIs of three commercial pre-reflow AOI systems are compared to demonstrate the importance of selecting an appropriate AOI system. This paper will increase the probability that anyone installing an AOI system during the pre-reflow process will obtain a successful gain with short payback period....

True Height Measurement in Solder Paste Inspection

Apr 29, 2015 | Dr. Subodh Kulkarni

SPI equipment is routinely used in Printed Circuit Board (PCB) manufacturing to monitor and control one of the most crucial steps affecting the finished quality of circuit board. Solder paste deposition is the key process in board assembly operations using SMT techniques. Our LSM™ system was the industry's first popular method of manually inspecting solder paste; our SE systems revolutionized SMT production by offering an automated method for performing in-process 3D inspection on the assembly line. SPI systems measure the height and volume of the solder pads before the components are applied and the solder melted, and when used properly, can reduce the incidence of solder-related defects to statistically insignificant amounts. Critical to the SPI measurement is the accuracy of the height measurement because that has a direct correlation with solder volume and defects....

Advanced modelling technique achieves near to zero set up time and minimal tuning

Apr 29, 2015 | Sean Langbridge

Statistical Appearance Modelling technology enables an AOI system to “learn real world variation” based on operator interaction with inspection task results. This provides an accurate statistical description of normal variation in a product. With modelling technology, the user does not have to anticipate potential defects as the system will “flag” anything outside the “normal production range”. And, since the system is programmed with real production variation, it is sensitive to small subtle changes enabling reliable defect detection. Autonomous prediction of process variation enables an AOI system to be set up from a single PCB with production-ready performance. Setup time can be < 15 minutes from data input to first PCB inspection making it an ideal solution for NPI and first-off verification....

162 news releases »

CyberOptics Demonstrates Advanced Airborne Particle Sensing Technology Recognized as Best Known Method (BKM) at SEMICON China

Feb 19, 2018 | CyberOptics® Corporation announces it will demonstrate its next generation Airborne Particle Sensor technology (APS3) 300mm with new ParticleSpectrum™ software at SEMICON China, March 14-16th at the Shanghai New International Expo Center in booth #5182 and #1202.

CyberOptics Demonstrates Yield-Improving Wireless Measurement Devices for Semiconductor Tools at SPIE

Feb 19, 2018 | CyberOptics® Corporation announces it will demonstrate its ReticleSense® Auto Multi Sensors – the world’s most efficient and effective wireless measurement devices for semiconductor fabs and equipment OEMs at SPIE Advanced Lithography at the San Jose Convention Center, February 27-28th at booth #314.

CyberOptics Launches Next Generation Airborne Particle Sensor (APS3) with New ParticleSpectrum™ Software

Jan 29, 2018 | CyberOptics® Corporation announces it will demonstrate its next generation Airborne Particle Sensor technology (APS3) 300mm with new ParticleSpectrum™ software at SEMICON Korea, January 31st through February 2nd at the Seoul COEX in booth # A418.

CyberOptics Demonstrates New MRS-Enabled 3D AOI, SPI and CMM Systems at APEX

Jan 28, 2018 | CyberOptics® Corporation today announced plans to exhibit in Booth #2409 at the 2018 IPC APEX EXPO, scheduled to take place Feb. 27 - March 1, 2018 at the San Diego Convention Center, California. Company representatives will demonstrate the new high-speed SQ3000™3D CMM, an extension of the MRS-enabled SQ3000 platform deemed best-in-class, the new SE3000™ SPI system and QX250i™ double-sided AOI system.

CyberOptics’ New Ultra-High Resolution Multi-Reflection Suppression (MRS) Sensor Receives Global Technology Award

Nov 15, 2017 | CyberOptics® announces that it was awarded a 2017 Global Technology Award in the category of Best Product – North America for its Ultra-High Resolution Multi-Reflection Suppression (MRS) sensor for the CyberOptics’ SQ3000™ 3D AOI system. The award was presented to the company during a Tuesday, Nov. 14, 2017 ceremony that took place during productronica in Munich, Germany.

CyberOptics Integrates Advanced MRS Technology into New SE3000™ 3D Solder Paste Inspection System

Nov 09, 2017 | CyberOptics® Corporation will demonstrate the new SE3000™ 3D Solder Paste Inspection (SPI) system with a proprietary Multiple-Reflection Suppression (MRS) Sensor in Hall A2, Stand 439 at productronica 2017, scheduled to take place Nov. 14 – 17, 2017 at the Messe München, in Germany.

CyberOptics Demonstrates New MRS-Enabled AOI, SPI and CMM Solutions at productronica Germany

Oct 17, 2017 | CyberOptics® Corporation will demonstrate the SQ3000™-DD 3D Automated Optical Inspection (AOI) system with the new Ultra-High Resolution Multiple-Reflection Suppression (MRS) Sensors in Hall A4, Stand 239 at productronica 2017, scheduled to take place Nov. 14 – 17, 2017 at the Messe München in Germany. The company also will unveil the new SE3000™ 3D SPI and SQ3000™ 3D CMM, both powered by MRS technology.

CyberOptics Launches Coordinate Measurement Software Suite for New High Speed SQ3000™ CMM System

Sep 24, 2017 | CyberOptics Corporation launches new SQ3000™ 3D CMM (Coordinate Measurement) system, powered by Multi-Reflection Suppression (MRS) technology and CyberCMM™, a new comprehensive software suite for coordinate measurement.

Multi-Reflection Suppression (MRS) Technology in SQ3000 3D AOI Featured at productronica India

Aug 30, 2017 | CyberOptics® Corporation today announced plans to exhibit at productronica India, scheduled to take place Sept. 14-16, 2017 at the Pragati Maidan in New Delhi. The company will demonstrate the SQ3000™ 3D Automated Optical Inspection (AOI) system with the new Ultra-High Resolution Multiple-Reflection Suppression (MRS) Sensor in the Maxim SMT Booth #1130, Hall #11. The company also will showcase its QX250i™ double-sided AOI and SE500ULTRA™ high-speed AOI.

Laser Design CyberGage®360, Automated 3D Scanning & Inspection System Adopted by Proto Labs in Their State-of-the-Art Metrology Lab

Aug 23, 2017 | Laser Design, Inc., a subsidiary of CyberOptics announces the adoption of the CyberGage360 3D Scanning and Inspection system by Proto Labs, the world’s fastest digital manufacturing source for custom prototypes and low-volume production parts providing unprecedented speed-to-market value for designers and engineers.

152 more news releases from CyberOptics Corporation »

fluid dispensing pumps for integration

x-ray inspection system