Kolb AQUBE L Series

Kolb AQUBE L Series Description:

AQUBE® L Series
For process safe fine cleaning of assembled PCB’s and Hybrids 

The new kolb AQUBE® systems are next-generation cleaning systems – even more efficient, even more compact, easy to handle and maintain, pre-equipped for extended water management and ready for the smart factory (SF ready).

The systems of the kolb AQUBE® L series offer process safe fine cleaning for PCBs, SiPs, HDI boards, hybrids and misprints from contaminations such as fluxes, rosin, resin, copper, Cu oxide and aggressive solder-support substances. AQUBE® L systems clean up to 830 (19 m²) eurocards in four variable horizontal drawer baskets (relative cleaning time per board: approx. 6.5 seconds).

The two tank systems with three separate circuits and a fully automatic up to 4step process (1. Cleaning,  2. Rinsing (tap water), 3. DI-rinsing with continuous DI-water processing, 4. Drying) are extremely compact delivering best cost of ownership value.

LH5

• Two-tank system with triple circuit function
• Digital Factory ready: DNAccess, remote control, traceability (PLC data scanning and memorizing)
• Fully automatic 4step process: cleaning, (MediumWipe®), rinsing (tap water), DI-water rinsing, VMH®-TurboDigital evaporative drying
• Suitable for horizontal DCB / power electronics cleaning (with option CWA® supercharger compression drying)
• Process and service intervals PLC controlled
• Event issuing and software control via high resolution 10″ display with capacitive multi-touch
• Horizontal PTFE mounted rotor system with up to six asynchronous spray rotors for thorough wetting (no blind spots)
• Relative cleaning time per eurocard: 12 sec.
• Automatic monitoring of ionic residues contamination and gauging of rinse water quality
• Heater in cleaning tank (A) as a standard feature
• Exchange for rinse water tank (B / C) and pump out unit as standard features
• EDGELESS Design and VARIccess® maintenance access: maximum capacity on a very small footprint
• HT version for high temperature cleaning and rinsing up to 80 °C (176 °F) available

LH7

• Two-tank system with triple circuit function
• Digital Factory ready: DNAccess, remote control, traceability (PLC data scanning and memorizing)
• Fully automatic 4step process: cleaning, (MediumWipe®), rinsing (tap water), DI-water rinsing, VMH®-TurboDigital evaporative drying
• Suitable for horizontal DCB / power electronics cleaning (with option CWA® supercharger compression drying)
• Process and service intervals PLC controlled
• Event issuing and software control via high resolution 10″ display with capacitive multi-touch
• Horizontal PTFE mounted rotor system with up to six asynchronous spray rotors for thorough wetting (no blind spots)
• Relative cleaning time per eurocard: 12 sec.
• Automatic monitoring of ionic residues contamination and gauging of rinse water quality
• Heater in cleaning tank (A) as a standard feature
• Exchange for rinse water tank (B / C) and pump out unit as standard features
• EDGELESS Design and VARIccess® maintenance access: maximum capacity on a very small footprint
• HT version for high temperature cleaning and rinsing up to 80 °C (176 °F) available