VJ Electronix

Rework and X-ray Inspection solutions for a variety of applications. VJ integrates proven industrial X-ray expertise with advanced SRT automation and NIS X-ray electronics inspection expertise.

Manufacturer of Assembly Equipment, Assembly, Inspection, Repair/Rework, Soldering

VJ provides Rework and X-ray Inspection solutions for a variety of electronics and industrial applications. Technologies offered in BGA Rework systems include convection, conduction and infrared for maximum heat transfer for Rework applications as small as 01005 to thermally challenging CCGA Rework. VJ BGA Inspection systems utilize closed (sealed) and open X-ray tubes along with analog image intensifiers and digital detectors to illustrate defects like voids, shorts and opens using through transmission and off-axis viewing capability.

VJ Technologies excels in providing state-of-the-art X-ray Inspection technology for defect detection and analysis and highly accurate. VJ integrates proven industrial X-ray expertise with advanced SRT automation and NIS X-ray electronics inspection expertise. VJ specializes in providing test validation and quality control solutions for a variety of applications.

VJ’s semi-automated and automated SMT Lead-Free Rework systems provide fast and controlled repair and are tailored for BGA rework and other complex area array devices like μBGA, POP, QFN, CSP and Flip Chip. These same rework systems equally accommodate larger devices like CCGA,  CPU Sockets, SMT and Through-Hole connectors.   VJ Rework systems are engineered with innovative SierraMate software, integrated with a simple 1,2,3, Go graphical user interface (GUI) and are built very robust for 24/7 continuous operation.

VJ Electronix Postings

16 products »

400R Semi-Automatic SMD Rework System

The 400R semi-automatic rework system is a high value flexible machine with a small foot-print. The 400R is designed to rework BGA, μBGA and other SMT assemblies. The 400R is “production ready” with many a...

Rework & Repair Equipment

400R Semi-Automatic SMD Rework System

400M BGA Manual Rework System

VJT's 400M BGA manual rework system is a low cost flexible machine with a small foot-print (28" x 28"). It is designed for the removal, placement and alignment of BGA, uBGA, CSP, SMT, MCM, and THT assemblies. Production ready with ad...

Rework & Repair Equipment

400M BGA Manual Rework System

400S - Automatic Solder Scavenger System

VJT's 400S is a stand-alone, non-contact scavenging system for the automatic removal of residual solder from a rework site. Based on the well established Summit Scavengers, the 400S provides all the advanced features necessary...

Rework & Repair Equipment

400S - Automatic Solder Scavenger System

400ST Plated Through-Hole rework system

The 400ST provides a controlled convective heating process for rework of Plated Through Hole (PTH)devices. The convection process eliminates copper dissolution issues users experience with traditional Solder Fountain rework methods. Plated Through...

Rework & Repair Equipment

400ST Plated Through-Hole rework system

Custom X-ray Inspection Solutions

Custom X-ray solutions for multiple electronics and other applications. VJ Electronix supplies non-standard X-ray systems and tools to meet requirements falling outside of our standard X-ray product line. Applications typically fall in...

Inspection

Custom X-ray Inspection Solutions

IR Compact Programmable Preheaters

VJ Electronix proudly offers the IR Preheater Series designed to preheat assemblies that require addition heat to compliment manual soldering and desoldering of SMT, Thru-hole and other applications. Lead-free applications benefit from p...

Rework & Repair Equipment

IR Compact Programmable Preheaters

SRT Micra - Mobile Device SMT Rework System

Mobile Device Rework System Revolutionary new heaters and power controls provide extremely high performance. Compact in design with SRT’s latest rework technologies, the Micra addresses the challenges of reworking technologies su...

Rework & Repair Equipment

SRT Micra - Mobile Device SMT Rework System

Summit 1800 Rework Station

VJ Electronix proudly offers the Summit 1800 within the SRT Series. The Summit 1800 Automated Rework system developed by SRT and further refined by VJ Technologies, is the industry’s standard for Rework systems. The Summit 1800 provides the ...

Rework & Repair Equipment

Summit 1800 Rework Station

Summit 1800S Scavenger

Standard Features: 600 W - Dedicated Solder Scavenger Heater Dynamic Height Sensing - real time control of scavenger gap Dual Gas Inlets - (CDA & N2 with Two Stage Pressure Regulator) Top Heat...

Rework & Repair Equipment

Summit 1800S Scavenger

Summit 2200 SMD Automatic Rework Station

VJE Summit 2200 is a fully automated and programmable rework system. It is the latest in a series of systems equipped with a programmable motorized X-Y table, top heater height, pick-up tube , and component theta. Summit 2200 rework syst...

Rework & Repair Equipment

Summit 2200 SMD Automatic Rework Station

See all products from VJ Electronix »

1 technical article »

Scavenging

Sep 01, 2011 | Harold Hyman

Scavenging, Site Dressing, Residual Solder Removal. What's in a name? "That which we call an onion, by any other name would smell as strong" (apologies to the immortal bard). And, regardless of the name you give it, the objective is the same, namely the clean up of remaining solder after a component (particularly a BGA) or R.F. Shield has been removed from a PCB. This paper will describe the various methods that are available and discuss their pros and cons....

116 news releases »

New Material Handling Automation System from VJE at NEPCON South China

Jul 18, 2017 | VJ Electronix will exhibit in Stand 1J45 at NEPCON South China, scheduled to take place August 29-31, 2017 at the Shenzhen Convention & Exhibition Center. The company will demonstrate new material handling automation for the XQuik II with AccuCount Technology, along with the new and improved model Summit 1800i. 

VJ Electronix Moves to Centrally Located Facility in Chelmsford, MA

Jun 11, 2017 | VJ Electronix today announced that effective July 1st, the company is moving to a new facility in Chelmsford. The new centrally located building is approximately 10 miles north of the existing Littleton facility.

VJ Electronix’s New Summit 1800i as Popular as Its Predecessor

May 16, 2017 | VJ Electronix, Inc., the leader in rework technologies and global provider of advanced X-ray inspection and component counting systems, reports success with the new Summit 1800i. Both long-term Summit customers and new, domestic and international, have placed orders for the enhanced model.

VJ Electronix to Demo Next-Gen Component Handling Automation at NEPCON China

Mar 16, 2017 | VJ Electronix will exhibit in Stand 1F43 at NEPCON China, scheduled to take place April 25-27, 2017 at the Shanghai World EXPO Exhibition & Convention Center. The company will demonstrate new material handling automation for the XQuik II with AccuCount Technology, along with the new and improved model Summit 1800i. 

VJ Electronix Adds Component Handling Automation to XQuik II

Jan 29, 2017 | VJ Electronix introduces component reel handing automation for its popular XQuik II with AccuCount system. 

VJ Electronix Adds Wong’s Kong King Int’l (Holdings) LTD. (WKK Distribution Ltd.) to Its China Sales Channel

Nov 15, 2016 | VJ Electronix, Inc. is pleased to announce that it has appointed WKK as a Distribution Channel Partner in China.

The VJ Electronix XQuik II Automatically Counts Components as Small as 01005 with Better Than 99 Percent Accuracy

Jul 27, 2016 | VJ Electronix will exhibit the award-winning XQuik II with AccuCount Technology in Booth # 1J45 at NEPCON South China, scheduled to take place August 30- September 1, 2016 at the Shenzhen Convention & Exhibition Center. The company also will demonstrate the improved Micra system and Summit II. 

VJ Electronix to Give Three Presentations around Rework and X-ray at the PHASE 4, Inc. Arizona Show &Tell Technical Conference

Jul 14, 2016 | VJ Electronix today announced plans to participate in the PHASE 4, Inc. Arizona Show & Tell Technical Conference, scheduled to take place August 9-11, 2016 at TechShop in Chandler, AZ. VJ Electronix will give three presentations during the event, in addition to exhibiting the XQuick II with AccuCount Technology.

VJ Electronix Strengthens Its Sales and Technical Support in California

Jun 19, 2016 | VJ Electronix has appointed DiversiTech Representatives, Inc. as its sales representative. DiversiTech will represent VJ Electronix throughout Southern California and Northern Baja California.

The XQuik II with AccuCount for More than 99% Inventory Accuracy Will Be Shown at NEPCON China

Mar 24, 2016 | VJ Electronix will exhibit in Booth 1E48 at NEPCON China, scheduled to take place April 26-28, 2016 at the Shanghai World EXPO Exhibition & Convention Center. The company will demonstrate the improved Micra system, XQuik II with AccuCount Technology and Summit II. 

106 more news releases from VJ Electronix »

PCB equipment

Rework Training Materials