VJ Electronix Products

SMT Products and Services offered by VJ Electronix


VJ Electronix

Rework and X-ray Inspection solutions for a variety of applications. VJ integrates proven industrial X-ray expertise with advanced SRT automation and NIS X-ray electronics inspection expertise. »»

VJ Electronix website
  • Browse:

16 listed by VJ Electronix

Product

Category

400R Semi-Automatic SMD Rework System

The 400R semi-automatic rework system is a high value flexible machine with a small foot-print. The 400R is designed to rework BGA, μBGA and other SMT assemblies. The 400R is “production ready” with many advanced features. With systems installed world-wid...

400R Semi-Automatic SMD Rework System

Rework & Repair Equipment

400M BGA Manual Rework System

VJT's 400M BGA manual rework system is a low cost flexible machine with a small foot-print (28" x 28"). It is designed for the removal, placement and alignment of BGA, uBGA, CSP, SMT, MCM, and THT assemblies. Production ready with advanced features, the PMT 400 is designed to addres...

400M BGA Manual Rework System

Rework & Repair Equipment

400S - Automatic Solder Scavenger System

VJT's 400S is a stand-alone, non-contact scavenging system for the automatic removal of residual solder from a rework site. Based on the well established Summit Scavengers, the 400S provides all the advanced features necessary for rapid and repeatable site dressing.

400S - Automatic Solder Scavenger System

Rework & Repair Equipment

400ST Plated Through-Hole rework system

The 400ST provides a controlled convective heating process for rework of Plated Through Hole (PTH)devices. The convection process eliminates copper dissolution issues users experience with traditional Solder Fountain rework methods. Plated Through Hole barrels are protected through multiple rewor...

400ST Plated Through-Hole rework system

Rework & Repair Equipment

Custom X-ray Inspection Solutions

Custom X-ray solutions for multiple electronics and other applications. VJ Electronix supplies non-standard X-ray systems and tools to meet requirements falling outside of our standard X-ray product line. Applications typically fall into three major categories: Very ...

Custom X-ray Inspection Solutions

Inspection

IR Compact Programmable Preheaters

VJ Electronix proudly offers the IR Preheater Series designed to preheat assemblies that require addition heat to compliment manual soldering and desoldering of SMT, Thru-hole and other applications. Lead-free applications benefit from preheating. VJ Electronix infrared preheaters provi...

IR Compact Programmable Preheaters

Rework & Repair Equipment

SRT Micra - Mobile Device SMT Rework System

Mobile Device Rework System Revolutionary new heaters and power controls provide extremely high performance. Compact in design with SRT’s latest rework technologies, the Micra addresses the challenges of reworking technologies such as PoP, QFN, micro-Passive like 01005, 0.3mm pi...

SRT Micra - Mobile Device SMT Rework System

Rework & Repair Equipment

Summit 1800 Rework Station

VJ Electronix proudly offers the Summit 1800 within the SRT Series. The Summit 1800 Automated Rework system developed by SRT and further refined by VJ Technologies, is the industry’s standard for Rework systems. The Summit 1800 provides the most advanced features designed specifically to ad...

Summit 1800 Rework Station

Rework & Repair Equipment

Summit 1800S Scavenger

Standard Features: 600 W - Dedicated Solder Scavenger Heater Dynamic Height Sensing - real time control of scavenger gap Dual Gas Inlets - (CDA & N2 with Two Stage Pressure Regulator) Top Heater Gas Saver - (saves CDA or N2 during preheat)

Summit 1800S Scavenger

Rework & Repair Equipment

Summit 2200 SMD Automatic Rework Station

VJE Summit 2200 is a fully automated and programmable rework system. It is the latest in a series of systems equipped with a programmable motorized X-Y table, top heater height, pick-up tube , and component theta. Summit 2200 rework system provides the most advanced features designed sp...

Summit 2200 SMD Automatic Rework Station

Rework & Repair Equipment

Summit 750 - SMT Rework Station

The Summit 750 is a Rework system specifically designed to satisfy the needs of users who demand high performance and advanced process control at an affordable price. Incorporating features normally only found on much higher priced equipment, the Summit 750 utilizes the proprietary Sier...

Summit 750 - SMT Rework Station

Rework & Repair Equipment

Summit II High Performance Rework Systems

The Latest in High Performance Rework Systems. Summit II combines the latest rework technologies and ergonomics with the throughput, accuracy and reliability of the renowned Summit product family. Summit II features a reduced footprint, yet larger board capacity with easy to adju...

Summit II High Performance Rework Systems

Rework & Repair Equipment

Summit LXi SMD Rework Station

Optimized Rework Process for Large PCB. Unlike other large board systems that are adapted versions of standard systems, the Summit LXi platform is the only rework system designed from the ground up to rework large boards. The LXi’s new enhanced control system eliminates the affe...

Summit LXi SMD Rework Station

Rework & Repair Equipment

VERTEX II Next Generation Affordable X-ray Inspection

VJ Electronix leads the way in providing robust and practical X-ray solutions to solve real production issues. Innovation and simplicity govern system design to maximize ease-of-use with programmed inspection and a simple 1–2–Go! user interface. Vertex II X-ray systems are p...

VERTEX II Next Generation Affordable X-ray Inspection

Inspection

XQuik Benchtop X-ray Inspection System

VJT XQuik is our answer to a compact X-ray inspection system for laboratory and industrial settings inspecting small items with varying density. XQuik has been constructed on four major principles: Compact Size: Small in size, but not capability. XQuik is a compact s...

XQuik Benchtop X-ray Inspection System

Inspection

XQuik with AccuCount - Compact Benchtop X-ray Inspection System with Component Reel Counting

XQuik is a compact benchtop X-ray inspection system for inspecting small items with varying density. Now, with AccuCount technology, the X-Quik is even more versatile allowing for component reel counting in just seconds. The VJ Electronix XQuik with AccuCount is designed to reduce tim...

XQuik with AccuCount - Compact Benchtop X-ray Inspection System with Component Reel Counting

Inspection

StikNPeel™ Rework Stencils

PCB machines