General Electric IC200ALG630 ANALOG INPUT

General Electric IC200ALG630 ANALOG INPUT Description:

Sales Manager: Sandy Lin

Email: unity@mvme.cn

Skype:onlywnn_1 

Mobile(Whatsapp): (+86)-18020776786

​​​

Yuehang: 

Shipping Term : TNT,DHL,FEDEX,ETC

Payment Term : T/T

Warranty: 12 month

yuehang supply： New+original+factory sealed+high quality

Service: quotation will be sent in 9 hours

Skype + whatsapp + mobile  =  24 hours /day   Oneline.

Package: Original packing with cartons.
Delivery time: Shipped in 3 days after payment 

AUTOMOTIVE COMPONENTS

Capricious consumer trends require manufacturing lines that are particularly flexible and able to create a variety of parts, or assemble several product lines without much alteration. As a result of this need for flexibility, manufacturing automotive components and assembling them is often the area in which robot-based automation can be seen at its best.

Intelligent manufacturing in the body shop aims to improve efficiency in casting parts. Forging a vehicle’s exterior parts like the fascia, bumpers and fuel tank, and producing interior parts like instrument panels, seats and air bags requiring very broad know-how and solutions based on robotics. Manufacturing the powertrain, chassis and the body of the vehicle also demands a great deal of precision.

Moore Automation Limited understands these requirements and works with car manufacturers to obtain the spare parts they need, as soon as possible. We specialise in identifying parts for machining, assembly, test, materials handling, safety and robot-based automation. We also offer a comprehensive and straightforward supply and repair service which can significantly reduce costs for your company.

General Electric IC200ALG630 ANALOG INPUT

General Electric IC200ALG630 ANALOG INPUT

General Electric IC200ALG630 ANALOG INPUT

Droop Reference
This is a typical speed refererence which, when enabled, provides a speed
setpoint to the Speed Control. This signal is then summed with the Unit Speed,
along with the gate position feedback signal multiplied by the droop gain. In
Follow Mode, the Reference Output follows the unit speed plus the droop
correction signal. This is a Base Reference, meaning that it is always enabled.
Max Speed Setpoint (%)= 100.0 - 180.0
Min Speed Setpoint (%)= 20.0 - 100.0
Speed Set Rate (%/s) = 0.01 - 10.0
Unloading Setpoint (%)= 85.0 - 110.0
Unloading Rate (%/s) = 0.01 - 10.0
Soft-Load Rate (%/s) = 0.001 - 10.0
Use External Signal? No or Yes
Use On Ext Signal Fail? Yes
Use Reference? Yes
Use Soft-Load? No or Yes
Table 5-11. Droop Reference Setup Values
Isochronous Reference
This is similar to the Droop Reference above. The primary difference is that the
Isochronous Reference sends a signal to the Speed Control to set the droop gain
to zero. This means that the governor will control the unit speed at the speed
setpoint. In Follow Mode, the Isochronous Reference always follows the actual
unit speed. Also, the Isochronous Reference is not allowed to operate in
External Mode. Although this is not a Base Reference, it is used exclusively
while the unit is off-line. While in the On Line Operation status, the
Isochronous Reference can only be selected if it has been enabled.
The Override Position (%) is internally set to 20% during the Unit Shutdown,
Waiting For Prestart, Unit Breakaway, and Unit Stop statuses; and 100% during
the Unit Start status. The Acceleration Rate (%/s) dictates the rate that the speed
setpoint is ramped from 20% to 100% during the Unit Start status.
Max Speed Setpoint (%)= Same as Droop Reference
Min Speed Setpoint (%)= Same as Droop Reference
Speed Set Rate (%/s) = Same as Droop Reference
Override Position (%) = See text
Acceleration Rate (%/s)= 1.0 - 100.0
Soft-Load Rate (%/s) = n/a
Use External Signal? No
Use On Ext Signal Fail  No
Use Reference? No or Yes
Use Soft-Load? No
Table 5-12. Isochronous Reference Setup Values
Loadsharing Reference
This is equivalent to an Isochronous Reference which can operate only in External
Mode. The External Signal is programmed so that a 12mA Analog Input is
translated into a 100% speed signal (normal speed) with the 4mA and 20mA values
offset from 100% speed by the Speed Window. This is shown in Figure 5-10. The
Speed Window (%) (Program) determines the Minimum and Maximum Limits for 
the Loadsharing Reference. Be sure that the External Signal and Speed Window are
calibrated the same. For instance, if you set your Speed Window to 5%, the 4mA
value for your External Signal should be equivalent to 95% speed, and the 20mA
value should be equivalent to 105% speed. If you are displaying RPM for speed,
you will have to calculate these corresponding values. 

TB805    3BSE008534R1    TB805 Bus Outlet    ABB     
TB806    3BSE008536R1    TB806 Bus Inlet    ABB     

TB807    3BSE008538R1    TB807 Modulebus Terminator    ABB         
TB810    3BSE008560R1    Modulebus Optical Port    ABB        
TB811    3BSE008568R1    Optical ModuleBus Port    ABB        
TB815    3BSE013204R1    TB815 Interconnection Unit    ABB         
TB820    3BSE008555R1    Modulebus Optical Modem    ABB        
TB820V2    3BSE013208R1    Modulebus Optical Modem    ABB        
TB825    3BSE036634R1    Optical Media Converter    ABB         
TB840    3BSE021456R1    TB840 Modulebus Cluster Modem    ABB         
TB840A    3BSE037760R1    Modulebus Cluster Modem    ABB         
TB842    3BSE022464R1    Optical ModuleBus Port    ABB         
TB845    3BSE021437R1    Dual Modulebus Outlet    ABB        
TB850    3BSC950193R1    CEX-Bus Terminatior    ABB        
TBB-01    E-31352    Termination Unit    ABB     
TC405K03    3BSE009616R1    Connection Cable Kit ABB    ABB         
TC501V150    3BSC550038R3    TC501V150 Termination unit, 150 Ohm    ABB        
TC505K03    3BSE009616R1, 3BSC840035R1, 3BSC840067R1    TC505K03 Connection Kit    ABB        
TC512    3BSE006383R1    Twisted Pair Modem    ABB         
TC512V1    3BSE018059R1    RS485 Twisted pair Modem    ABB         
TC513    3BSE006385R1    AF100 Twisted Pair Coax Modem    ABB        
TC513V1    3BSE018405R1    AF100 Twisted Pair Coax Modem    ABB         
TC514V2    3BSE013281R1    AF100 Twisted Pair to Opto Repeater    ABB        
TC515V1    3BSE013243R1    AF100 Twisted Pair to Twisted Pair Repeater    ABB         
TC515V2    3BSE013284R1    AF100 Twisted Pair to Twisted Pair Repeater    ABB        
TC516    3BSE012632R1    RS485 Twisted Pair Modem    ABB         
TC520    3BSE001449R1    System Status Collector    ABB        
TC530    3BUR000101R1    T-Box for MOD 300 DCN    ABB         
TC532    3BUR980023R1    Fiberoptic DCN T-Box    ABB        
TC562    3BSC630049R1    Short Distance Modem    ABB        
TC570    3BSE001458RI    Master Fieldbus Connection Module    ABB         
TC625    3BSE002224R1    AF100 Coaxial Modem    ABB