Allen-Bradley Reliance 802273-14R FlexPak 3000 Operator Interface Module

Allen-Bradley Reliance 802273-14R FlexPak 3000 Operator Interface Module Description:

Sales Manager: Sandy Lin

Email: unity@mvme.cn

Skype:onlywnn_1

Mobile(Whatsapp): (+86)-18020776786

​​​

yuehang: 

Shipping Term : TNT,DHL,FEDEX,ETC

Payment Term : T/T

Warranty: 12 month

yuehang supply： New+original+factory sealed+high quality

Service: quotation will be sent in 9 hours

Skype + whatsapp + mobile  =  24 hours /day   Oneline.

Application field
Company products are widely used in CNC machinery and metallurgy, oil and
gas,petrochemical, chemical, paper printing, textile printing and dyeing, machinery, electronic
manufacturing, automobile manufacturing, tobacco, plastic machinery, electric power,water
conservancy, water treatment / environmental protection, municipal engineering,boiler
heating, energy, power transmission and distribution. 

Allen-Bradley Reliance  802273-14R FlexPak 3000 Operator Interface Module

Allen-Bradley Reliance  802273-14R FlexPak 3000 Operator Interface Module

Allen-Bradley Reliance  802273-14R FlexPak 3000 Operator Interface Module

Store the Drive
After receipt inspection, repack the drive in its original shipping container until ready
for installation. To ensure satisfactory operation at startup and to maintain warranty
coverage, store the drive as follows:
• In its original shipping container in a clean, dry, safe place.
• In an ambient temperature that does not exceed 65°C (149°F) or go below -30°C
(-22°F).
• Within a relative humidity range of 5 to 95% without condensation.
• Away from a corrosive atmosphere. In harsh environments, cover the shipping/
storage container.
• At an altitude of less than 3,000 meters (10,000 ft.) above sea level.
1.2 Drive Identification Nameplate
The FlexPak 3000 drive has a nameplate on the left side of the chassis that identifies
the specific model number design, applicable AC input power and DC output power
data. Refer to the sample nameplate in figure 1.1. All communication concerning this
product should refer to the appropriate model number information.

Model Numbers
Drive specific data, such as horsepower (or output current), regenerative or nonregenerative
type, line voltage, chassis or enclosure type, software version and UL
certification, can be determined by the drive model number. The model number
structure is shown in figure 1.2.
Up to 300 HP, drives configured for 460 VAC input can be converted to 230 VAC input
at one half the 460 VAC horsepower rating by installing a 460 to 230 Volt Conversion
Kit (M/N 916FK0100, 1-60 HP, or M/N 916FK0200, 75-150 HP). Instruction manual
D2-3329, which is supplied with the kit, provides installation instructions. For drives
above 300 HP, contact your local Reliance Electric sales office for assistance

The drive is a full-wave power converter without back rectifier, complete with a digital
current minor loop and a digital major loop for armature voltage or speed regulation by
tachometer feedback. Figure 1.3 shows a block diagram of the drive.
Figure 1.2 – Model Number Structure
150FR4042
F = FlexPak 3000 product line
Software version number 0-9, A-Z
B = Regenerative drives with inverting fault breaker
K = Kits
R = Regenerative drives
N = Non-regenerative drives
0 = Chassis
7 = Integrator
0 = No listing
1 = U/L and C-U/L
2 = U/L, C-U/L, and CE
For horsepower-rated drives:
 Horsepower under 1000
 For current-rated drives:
 Rated output armature current
2 = 230 volts
3 = 380/415 volts
4 = 460 volts
7 = Integrator
8 = European Power Module
Introduction to the FlexPak 3000 Drive 1-3
The drive employs a wireless construction and uses a keypad for drive setup,
including parameter adjustments and unit selection, monitoring, and diagnostics.
Multiple language capability in English, French, German, Spanish, Italian and
‘Numeric Code' is available. Reference, feedback, and metering signals can be
interfaced to the drive. The drive can be controlled locally by the Operator Interface
Module (OIM) keypad or remotely by using the terminals at the regulator board
terminal strip. You can select one of the following active control sources using the
CONTROL SOURCE SELECT key:
• KEYPAD
• TERMBLK (regulator board terminal strip)
• NETWORK (if an optional network communication board is installed)
• SERIAL (CS3000). 

MICROTROL DC00006-501 

NIB ALLEN BRADLEY S50387 MODULATOR LOGIC CONTROL BOARD REV M 50387

FESTO DNCE-32-100-BS3 ACTUATOR ELECTRIC CYLINDER DNCE-32-100-BS

NIB TELEMECANIQUE XBT MEM16 MEMORY CARD 16 MO 034833 PRETEC PAJ016AS4 

GE FANUC IC600YB930A PROTECHED 115VAC 

ORIENTAL MOTOR VEXTA 4GD5K GEAR HEAD W/ KBLM460GD-CM AC 

REPAIRED GENERAL ELECTRIC 6VFW2100 STATOTROL II DRIVE 6VFWC2100A4

ISHIDA P-5285B EXC  

GENERAL ELECTRIC DS3800DXRA1C1C 6BA04 SIGNAL RECEIVER CARD SERIES 6 DXRA 6DA03

REPAIRED UNICO 703-591 RACK 703591, 313-730, 0639-WWW8

NIB MSA 490892 CONTROL BOARD 5000 SERIES REV 2 FRONT 

AMETEK DREXELBROOK 700-1202-021 PXTX SERIES SENSING ELEMENT PROBE 10-30VDC

ALLEN BRADLEY 140092 REV. 24 4202 BOARD SPARE PARTS KIT  140093, 133495-04

SERVO DYNAMICS SDBDTL925-34 BOARD PART NO. 7300-8074

EATON / OPCON 1410A-6501 PHOTOELECTRIC MODULE 115VAC 50/60HZ