Woodward 5500-577 Big discount

Woodward 5500-577 Big discount Description:

Contact: Nancy Lin

Email:info@amikon.cn

Skype:onlywnn_1

Telegram:+8618020776786

Mobile(Whatsapp): (+86)-18020776786

QQ :2851195456

​​​

Control Systems (DCS, PLC/SPS, CNC)

- Panel Controllers

- HMI and Display Panels

- Industrial PC’s

- Drives ( Frequency Inverter and Servo)

- Motors

- Power Supplies

Amikon adhering to the enterprise concept of excellence, whether it is industrial automation parts, services or delivery efficiency, we are committed to do better.

We deliver a variety of parts.Email:info@amikon.cn

Machines break and downtime can cost companies millions in lost revenue. Our multi-lingual team scour the globe to find quality obsolete, new and reconditioned parts to get industrial machines back up and running at the best price.

Whether it's service, speed or delivery, we always deliver more.Email:info@amikon.cn

Amikon Limited specialises in supplying automation equipment to specific industry sectors. We work with some of the worlds largest companies & our knowledge and expertise is regularly featured in industry publications across the globe.Email:info@amikon.cn

WE DELIVER MORE SERVICE

Excellent service is woven into the very fabric of our operations. It’s also where we invest the most – merging the very best of talent with bespoke technology to enable us to ensure we always deliver more for our customers.Email:info@amikon.cn

Woodward 5500-577 Big discount

Woodward 5500-577 Big discount

Woodward 5500-577 Big discount

The MSLC’s baseload mode of operation allows an operator to set the plant to a
specified load. A proportional or integrating control action can be used with this
mode of operation. The integrating mode of operation can be used with systems
tying to an unstable grid to allow the plant to control at a constant load and not
vary based on grid frequency.
The MSLC’s remote load setting mode allows plant load to be set by a remote
4–20 mA signal.
The MSLC’s import/export control mode, when enabled senses plant-to-utility tie
line power flow and controls this flow based on a import/export setpoint.
The MSLC’s process control mode allows any process directly related to plant
load to be controlled.
Once the plant-to-utility tie breaker is closed the MSLC soft-loads the plant to a
load setting determined by the mode of operation (base load, import/export,
Process control). When commanded the MSLC can also soft-unload the plant
and issue a plant-to-utility tie breaker open command at a set power level.
When using the MSLC as both a synchronizer and load control, the system
DSLCs must be in their Loadsharing mode to enable the MSLC to control them.
The MSLC is only active when synchronizing a plant bus to a utility bus, or when
the utility tie breaker is closed to control tie line power (real & reactive). Once the
utility tie breaker opens, the MSLC becomes disabled and does not effect DSLC
load sharing control. Because the MSLC/DSLC network only allows one master
controller at a time, only one MSLC at a time can be utilized to control plant load.
For more information on Woodward’s Master Synchronizer & Load Control and
how to apply it, please refer to Woodward manual 02022.
Installation Notes
A Hand-held Programmer (9905-292) is required and used by the MSLC to
configure and calibrate it to the site specific application.
The MSLC requires a power source of +24 Vdc @ 1 A. The 505 power supplies
can not supply this much power, thus an external power supply may be required. 

- AMCI size 11 (1.1″ diameter) resolver R11X-J10/7G
- AMCI size 11 (1.1″ diameter) resolver R11X-J10/7N
- AMCI size 11 (1.1″ diameter) resolver R11X-2J10/20
- AMCI size 11 (1.1″ diameter) resolver R11X-J12/7
- AMCI size 11 (1.1″ diameter) resolver R11X-4J10/20
- AMCI size 11 (1.1″ diameter) resolver R11XL10/6G
- AMCI size 11 (1.1″ diameter) resolver R11W-M10/7
- AMCI size 11 (1.1″ diameter) resolver R11X-N10/7
- AMCI resolver to encoder converter RD141S
- AMCI replaces the previous AMCI cables C1T-(X) / C2T-(X) / C3T-(X) / C4T-(X) / C1TP-(X) / C1TG-(X) / CT-(X)
- AMCI used with all single resolver HT-400 and HT-400-X transducers that have a connector CTL-(X)MS25 CABLE…

Installation Notes
A Hand-held Programmer (9905-292) is required and used by the DSLC to
configure and calibrate it to the site specific application.
The DSLC requires a power source of +24 Vdc @ 1 A. The 505 power supplies
can not supply this much power, thus an external power supply may be required.
The DSLC can interface with the unit Automatic Voltage Regulator through
contacts or a +9 volt bias signal.
For more information on Woodward’s Digital Synchronizer & Load Control,
please refer to Woodward manual 02007. 

Master Synchronizer and Load Control (MSLC)
The Woodward MSLC is a microprocessor based plant load control designed for
use in three-phase electric power generation sites equipped with Woodward
DSLCs which operate in parallel with the utility. The MSLC is a tie-line
synchronizer, a plant import/export load control, reactive load control (power
factor), and a master process control integrated into one package.
Used as a synchronizer, the MSLC provides phase (or slip frequency) and
voltage match synchronizing of the local plant bus to a main power grid. It
communicates over a LAN using a digital Echelon network with system DSLCs to
control plant frequency, phase, and voltage to perform automatic plant
synchronization.
After the utility tie breaker is closed manually or by the MSLC, the MSLC then
controls plant load to a baseload setting, remote load setting, import/export
demand setting, or process control demand setting. If programmed, reactive tie
line power can also be controlled by the MSLC through each DSLC interfacing to
each unit’s automatic voltage regulator. 

- AMCI stepper motor wiring guide WIRING
- AMCI encoder specifications for double-shaft stepper motors ENCODER SPECS
- AMCI size 23 integrated stepper motor drives SMD23
- AMCI SMD23
- SMD34
- SD7540
- and SD7540A configuration software SMD SOFTWARE
- AMCI size 2.5″ incremental output version DC25
- AMCI size 2.5″ absolute digital output version DC25
- AMCI size 2.5″ absolute analog output version DC25
- AMCI size 2.5″ absolute DeviceNet version DC25
- AMCI size 2.5″ absolute multi-turn ssi output version DC25
- AMCI size 4.25″ absolute multi-turn analog output version DC425
- AMCI servo mount side connector H25-SS
- AMCI flange mount side connector H25-FS
- AMCI servo mount end connector H25-SE
- AMCI flange mount end connector H25-FE
- AMCI flange mount
- end connector – stainless steel
- high temperature unit H25-FE-R3HC
- AMCI flange mount
- end connector – 1.4 transformation ratio H25-FE-R4
- AMCI flange mount
- side connector – 1.0 transformation ratio H25-FS-R5B
- AMCI C & A / Namco replacement H25-F1E
- AMCI flange mount
- side connector – high temperature integral cable H25S-FS-HFL
- AMCI servo mount
- 15 foot integral cable H25-SL-15 replacements for discontinuted Allen-Bradley Bulletin 846 series
- H25-FE-RXA replaces Allen-Bradley 846-SJDA1CG-RX
- H25-FE-RXN replaces Allen-Bradley 846-SJDN1CG-RX
- H25-FS-RXA replaces Allen-Bradley 846-SJDA2CG-RX
- H25-FS-RXN replaces Allen-Bradley 846-SJDN2CG-RX
- H25-SE-RXA replaces Allen-Bradley 846-SJHA1CG-RX
- H25-SE-RXN replaces Allen-Bradley 846-SJHN1CG-RX
- H25-SS-RXA replaces Allen-Bradley 846-SJHA2CG-RX
- H25-SS-RXN replaces Allen-Bradley 846-SJHN2CG-RX
- AMCI ENCODER END CONNECTOR HT-20
- AMCI ENCODER SIDECONNECTOR HT-20S
- AMCI ENCODER ENDSTAINLESS STEEL HOUSING HT-20C
- AMCI ENCODER VITRON SEAL HT-20K
- AMCI ENCODER NITRILE SEAL HT-20L
- AMCI geared single resolver multi-turn transducer HT-20-(X)
- AMCI geared dual resolver multi-turn transducer HTT-20-(X)
- AMCI independent resolvers
- geared 1:1 for redundant applications HTT-20-1(X)
- AMCI single-turn resolver – 1″ NPT conduit fitting HT-400
- AMCI single-turn resolver with connector HT-400-1E
- AMCI independent resolvers
- geared 1:1 for redundant applications HTT-400-1
- AMCI dual resolver
- 180 turn transducer – 1″ NPT conduit fitting HTT-400-180
- AMCI single turn resolver HT-6
- AMCI AB 1326 servo motor mount
- geared dual resolver multi-turn transducer HTT-425-A1S-(X)
- AMCI front mount
- geared dual resolver multi-turn transducer HTT-425-F1E-(X)
- AMCI foot mount
- geared dual resolver multi-turn transducer HTT-425-T1S-(X)
- AMCI Direct Replacement for AVG/Autotech Controls RL210 128 turn transducers HTT-400-128
- AMCI Direct Replacement for AVG/Autotech Controls SAC-RL100-Gxxx multi-turn transducers HT-400-(X)
- AMCI Direct Replacement for AVG/Autotech Controls SAC-RL100 single turn transducers HT-400
- AMCI size 11 (1.1″ diameter) resolver R11W-F10/7
- AMCI size 11 (1.1″ diameter) resolver R11W-F10/7-2
- AMCI size 11 (1.1″ diameter) resolver R11W-2F10/7
- AMCI size 11 (1.1″ diameter) resolver R11X-A10/7
- AMCI size 11 (1.1″ diameter) resolver R11X-C10/7
- AMCI size 11 (1.1″ diameter) resolver R11W-B10-7-1
- AMCI size 11 (1.1″ diameter) resolver R11X-C10/3-1
- AMCI size 11 (1.1″ diameter) resolver R11X-C12/3
- AMCI size 11 (1.1″ diameter) resolver R11X-E10/7
- AMCI size 11 (1.1″ diameter) resolver R11X-F10/7
- AMCI size 11 (1.1″ diameter) resolver R11X-G10/7-1
- AMCI size 11 (1.1″ diameter) resolver R11X-J10/3
- AMCI size 11 (1.1″ diameter) resolver R11X-J10/7