Online Two Component Ab Glue Epoxy Automatic Vacuum Dispensing Potting Robot Ab Epoxy System Two Part Dosing Machine

Online Two Component Ab Glue Epoxy Automatic Vacuum Dispensing Potting Robot Ab Epoxy System Two Part Dosing Machine Description:

Whatsapp+86 13425164065

Email: gluepotting@gmail.com

Online Two Component AB glue epoxy Automatic vacuum dispensing potting robot ab epoxy system two part dosing machine

Two component automatic mixing ratio machine

We Daheng Automation specialize in different types of potting and dispensing system. No matter what your resin application requirements look like: we can do most of them in our fully equipped lab. We can handle 1- and 2-component polyurethanes, epoxies, acrylics, silicones, temperature, humidity and UV curing materials. They can be from low- to high-viscosity, filled or unfilled and even high abrasive for thermal conductivity.

Potting and encapsulation is the process of embedding electronic components & assemblies in a liquid resin (potting compounds) to protect them against rough environment conditions. Potting can be performed in atmosphere pressure or even under vacuum, if high voltage insulation and high temperature differences are needed. Encapsulation of parts will stop corrosion of metals and reduce damage caused by vibration and mechanical stress. 





We offer automatic and se-mi automatic fluid dispensing potting machine

What is the difference between 2K AB adhesive materials manual potting machine and robot potting machine ? 
 

Automatic AB potting machine is composed of Five Systems:

1. Vacuum material-feeding system or diaphragm pump feeding system
2. High precision pump metering system
3. Dynamic/Static mixing system
4. Three-axis motion system
5. Programming control system.

AB-component materials flows into the pump through the feeding system (AB tanks) separately by the self-suction force of the metering pump.
 

Semi automatic gue dispensing machine

1. Vacuum material-feeding system
2. High precision pump metering system
3. Dynamic/Static mixing system
4. Manual dispensing by glue gun or pedal .

AB-component materials flows into the pump through the feeding system (AB tanks) separately by the self-suction force of the metering pump.

Features :

Strong versatility / Multiple configuration / High production capacity / High precision

1. Auto feeding : take use of vacuum pressure to feed materials into A&B tank separately.
2. Tank Stirring : A and B tank configure with stirring motors and blades to prevent material sediment in the tank bottom .
3. Heating : Tank , pipe , pumps are optional with heaters to assure the whole system can be heating from room temperature to 90°C adjustable.
4. Vacuum : A &B tank vacuum for degas the bubble inside material .
5. Dynamic mixing : Configuring dynamic motor and mixer to mix A and B fluids evenly.

  
Advantages:

1,Accurated metering and even mixing helps to avoid the waste of material.
2,Dispensing volume and positioning keep machine work consistent and fast.
3,Good universality
4,Easy to program and operate.
5,Tally function, non-standard mode, primer mode, level alert, filter mode, liquid display device, preventing back-flow device and other functional device.

 

1. Applications:

Potting&Encapsulation &Casting: electronics componnets , PCB board, Capacitor, power supply, transformer, ignition coil, reverse sensor, circuit board, filter products ,underwater parts, electronic ballast ,aviation parts, aerospace parts....

 

Dispensing&Dosing : LED strip , led lamp , led bulb , aluminum,led screen , display module ,medical parts,medical liquid filling ....

 

Bonding&doming : LCD screen ,LOCA bonding,ABS plastic,different types of stickers , badge , keychains , souvenirs ,arts , photo frame , and other arts graphics....

Transformer , capacitance , power module , regulating plate ,protection module , generator , pressure package , soli relay ,fault indicator , Sensors , junction box , clutch , wave filter , water meter , boattery cover , rectifier and so on ...

 

Suitable Material

1K and 2-component polyurethanes, epoxies, acrylics, silicones, temperature, humidity and UV curing materials.

Two component potting materials , 2-part compound materials, AB part compound materials , 2K silicones ,2K epoxies resin, Bi-component PU, Ployerster, Polyurethane, UV materials and so on .
 

Machine description and working principle 

Compound materials A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine for metering A and B resin by setting ratio, draining out material individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.


 

Standard Wooden Case with Vacuum Package

1.By air, for sample and small package, international express like DHL, UPS, EMS...
2. By sea, for large package and quantity;
3.Other ways as customer requested.

Sara Dong 

Sales Manager

0086 13425164065(whatsapp/wechat)
Wechat : 0086 134 2516 4065
Skype: dzyljy