SMT stencil clean roll for MPM smt machine

SMT stencil clean roll for MPM smt machine Description:

smt stencil clean roll are used to remove residual solder paste from the bottom side of PC Board stencils. Using Stencil Wiping Rolls prevents smearing, bridging, and solder balls caused by normal printing of solder paste onto PC Boards.

Most MPM printers accommodate the stencil roll with the 18"long core tube. The new MPM Accela can accommodate a "high capacity" stencil roll that has 130 linear feet of material, and just under a 4.0" outside diameter. The UP2000, UP3000, and all of the AP models use a roll with a 3/4" inside diameter core tube and a 2.5" roll OD. The roll OD determines the amount of linear feet per roll, with most having 39'. The former SM Tech models that were integrated into the MPM line, and re-engineered as the UP1500 and more recently as the Momentum typically use the stencil rolls with a 1.5” core ID, JNJ part numbers ending in “SM”.

Characteristics:

1. Esocoo is made of high-quality woodpulp/polyester spunlaced nonwovens
2. Prime cleaning performance
3. Excellent absorption with water and solvent
4. Lint-Free and no scratch to stencils
5. High tensile strength
6. Available for all the popular automatic SMT machine brands and models, such as MINAMI, DEK, MPM, JUKI, FUJI, YAMAHA, Sony, Panasonic, ASKA, Samsung, SUNEAST, EKRA, KME, etc.