GE Fanuc IC695ALG708 PACSystems RX3i General Electric IC695ALG708

GE Fanuc IC695ALG708 PACSystems RX3i General Electric IC695ALG708 Description:

onlywnn_1   +8618020776786   mooreplc       info@amikon.cn

- Panel Controllers 

- HMI and Display Panels 

- Industrial PC’s 

- Drives ( Frequency Inverter and Servo) 

- Motors 

- Power Supplies 

Non-Isolated Analog Voltage/Current Output module IC695ALG704 provides

four configurable voltage or current output channels.

Non-Isolated Analog Voltage/Current Output module IC695ALG708, shown at

left, and Non-Isolated Analog Voltage/Current Output module IC695ALG728 both

provide eight configurable voltage or current output channels. Module

IC695ALG728 also features HART version 5.0 communications capability on each

channel.

Analog channels can be configured for these output ranges:

▪ Current: 0 to 20mA, 4 to 20mA

▪ Voltage: +/- 10V, 0 to 10V

On module IC695ALG728, channels that will use HART communications must be

configured for the 4-20mA range.

These modules must be located in an RX3i Universal Backplane. Modules

IC695ALG704 and IC695ALG708 require an RX3i CPU with firmware version 3.0 or

later. Module IC695ALG728 requires an RX3i CPU with firmware version 3.5 or

later. Machine Edition Version 5.0 SP3 Logic Developer-PLC or later must be used

for configuration.

These modules can be used with a Box-style (IC694TBB032), Extended Box-style

(IC694TBB132), Spring-style (IC694TBS032), or Extended Spring-style

(IC694TBS132) Terminal Block. Extended terminal blocks provide the extra shroud

depth needed for shielded wiring. See the PACSystems RX3i System Manual,

GFK-2314 revision B or later for more information about Terminal Blocks. Terminal

Blocks are ordered separately.