Micro Dot Paste Dispensing

Subscribe to Thread

Any of you guys can recommend micro dot paste dispensing equ... - Jul 22, 2004 by Eric Dahilig

... - Jul 23, 2004 by PeteC

Thanks for the info. I have already talked with the guys ... - Jul 25, 2004 by Eric Dahilig

GPD Global provides a line of system to for small volume sol... - Jul 30, 2004 by Christian

The website for GPD Global is www.gpd-global.com ... - Jul 30, 2004 by Christian

www.asymtek.com www.creativedispensing.com these are two... - Jul 30, 2004 by PeteC

I have already been working with GPD regarding this project ... - Aug 01, 2004 by Eric Dahilig

Eric Dahilig

#29614

Micro Dot Paste Dispensing | 22 July, 2004

Any of you guys can recommend micro dot paste dispensing equipment capable of fine pitch (around 0.5mm) and 0.3mm pad size?

I have a current project that needs the below requirement and we are trying on with the said process apart from the current standards of paste printing. Also, any pointers on the pro's and con's of paste dispensing vs. paste printing that you have experienced before.

Advance thanks for the help.

reply »

PeteC

#29625

Micro Dot Paste Dispensing | 23 July, 2004

http://www.speedlinetechnologies.com/camalot/xyflexpro.aspx

reply »

Eric Dahilig

#29650

Micro Dot Paste Dispensing | 25 July, 2004

Thanks for the info.

I have already talked with the guys from SIP (Speedline) for the inquiry about Camalot Dispenser. But I'm looking for other machines to benchmark so at least there would be a comparison.

reply »

Christian

#29767

Micro Dot Paste Dispensing | 30 July, 2004

GPD Global provides a line of system to for small volume solder paste and condutive adhesive dispensing know as the MicroMax. Our systems have an accuracy of 0.001" at the needle tip, capability of two valve mountings, integrated closed loop needle calibration, auto needle cleaning, zoom and focus cameras plus other features that make microvolume dispensing a snap.

reply »

Christian

#29769

Micro Dot Paste Dispensing | 30 July, 2004

The website for GPD Global is

www.gpd-global.com

reply »

PeteC

#29770

Micro Dot Paste Dispensing | 30 July, 2004

www.asymtek.com www.creativedispensing.com

these are two others

reply »

Eric Dahilig

#29786

Micro Dot Paste Dispensing | 1 August, 2004

I have already been working with GPD regarding this project but at the same time the stage of the project is still on the selection process so I'm still open to other machines to be qualified.

As per current machine in house (Micromax II), we have yet to see particular consistent dispensed material on such small area. Specifically now since we will only dispense on 0.3mm pad @ 0.5mm pitch.

reply »