HSP 4792 dull cutters

Subscribe to Thread

Dose the tolerances for the cutting blade and anvil on a HSP... - Dec 19, 2003 by Paul pmd

K&K Grinding 610-454-0466 kkgrindingco msn.com place th... - Dec 22, 2003 by PeteC

Dear Paul, My company carbide refurbishs these cutters fo... - Dec 31, 2003 by Ken K

Paul pmd

#26687

HSP 4792 dull cutters | 19 December, 2003

Dose the tolerances for the cutting blade and anvil on a HSP-4792 allow for sharpening. Replacement blades are over 2k$ and Universal tells me that tolerances wont allow sharpening. Can a percision sharpening shop be reccomended. Thanks in advance for any help.

reply »

PeteC

#26695

HSP 4792 dull cutters | 22 December, 2003

K&K Grinding 610-454-0466 kkgrindingco msn.com

place the "at" sign inbetween kkgrindingco and msn.com for some reason the site will not let me post with the "at" sign.

reply »

Ken K

#26749

HSP 4792 dull cutters | 31 December, 2003

Dear Paul,

My company carbide refurbishs these cutters for Sanyo/UIC chip-shooters as well as for Fuji CP machines. The trick is to add carbide and then precision grind to orginal specifications. I have done this for many customers, most recently Celestica. The price to carbide refurbish these cutters is $350 each for UIC p/n 630-070-9384 and $450 each for p/n 630-073-9384.

My company is located at 112 Bridge St., Gratersford Pennsylvania USA 19426. Tel: 1-800-894-7463 from USA and Canada. Use +1-610-454-0466 from outside the USA. Fax is +1-610-489-0830 E-Mail: kkgrindingco msn.com Web: http://www.kktools.net

I look forward to hearing from you soon.

Thanks, Ken Kripak 112 Bridge St

reply »