Adjustable Reflow Pallets

Subscribe to Thread

I am looking for anyone who may have information on adjustab... - Apr 26, 2002 by

Search the fine SMTnet Archives for pallet suppliers. ... - Apr 26, 2002 by davef

Hi, think there's a guy who is a SMT consultant, he also ... - Apr 29, 2002 by ianchan

i have had great success with S.P. precision in the past. 1... - Apr 29, 2002 by RDR

> I am looking for anyone who may have information >... - May 06, 2002 by

Mike Frye

#19694

Adjustable Reflow Pallets | 26 April, 2002

I am looking for anyone who may have information on adjustable reflow pallets. Could you please provide a supplier and contact. My dilema is that during an initial NPI build the PCB's may not arrive with rail adds. I need a way to transfer this PCB through the SMT gear without manipulating the assembly by hand. Anyone who can provide any feedback would be much appreciated.

This message was posted via the Electronics Forum @

reply »

davef

#19700

Adjustable Reflow Pallets | 26 April, 2002

Search the fine SMTnet Archives for pallet suppliers.

reply »

ianchan

#19714

Adjustable Reflow Pallets | 29 April, 2002

Hi,

think there's a guy who is a SMT consultant, he also sells SMT mfg solutions.

try website : http://www.bobwillis.co.uk

dunno how good his solutions are, never tried em b4. He seems to have remarkable popularity, so give him a shot.

I recall seeing something on pallet support for PCBA

reply »

RDR

#19733

Adjustable Reflow Pallets | 29 April, 2002

i have had great success with S.P. precision in the past. 1-800-725-5388 Talk to Chad Haima.

Russ

reply »

Eric Miller

#19783

Adjustable Reflow Pallets | 6 May, 2002

> I am looking for anyone who may have information > on adjustable reflow pallets. Could you please > provide a supplier and contact. My dilema is that > during an initial NPI build the PCB's may not > arrive with rail adds. I need a way to transfer > this PCB through the SMT gear without > manipulating the assembly by hand. Anyone who can > provide any feedback would be much appreciated.

Hi Mike,

We have a user friendly adjustable pallet that will work for your application, please contact me off line for additional information.

Eric Miller Ascentec Engineering 503-925-1942

reply »