What is spec on stretch????

Subscribe to Thread

Hi, ... - Apr 16, 1999 by Justin Medernach

| Hi, | I just cheesed my previous attempt at this. I lo... - Apr 16, 1999 by Justin Medernach

| | Hi, | | I just cheesed my previous attempt at this. ... - Apr 16, 1999 by davef

| | | Hi, | | | I just cheesed my previous attempt at thi... - Apr 19, 1999 by Justin Medernach

Justin Medernach

#11914

What is spec on stretch???? | 16 April, 1999

Hi,

reply »

Justin Medernach

#11915

Re: What is spec on stretch???? | 16 April, 1999

| Hi, | I just cheesed my previous attempt at this. I looked through IPC 600 and couldn't find anything relating to dimensional stability of a board with regard to stretch. I found bow and twist but nothing on size. I have a PCB that is .030" over size in the width. THe width should be 3.540" and I've got 3.570". Sorry about the podunk request but I'm kind of stuck.

Thanks, Justin

reply »

davef

#11916

Re: What is spec on stretch???? | 16 April, 1999

| | Hi, | | I just cheesed my previous attempt at this. I looked through IPC 600 and couldn't find anything relating to dimensional stability of a board with regard to stretch. I found bow and twist but nothing on size. I have a PCB that is .030" over size in the width. THe width should be 3.540" and I've got 3.570". Sorry about the podunk request but I'm kind of stuck. | | Thanks, | Justin | Justin: We use IPC-A-600 to the determine that a board looks correct and use IPC-D-300G, Printed Board Dimensions and Tolerances to cover dimensioning and tolerancing requirements boards. Standard manufacturing tolerances are:

Greatest Board/Panel Dimension Class 1 Class 2 Class 3 Up to 300 (12.00) 0.70 0.50 0.30 (0.028) (0.020) (0.012) More than 300 (12.00) 0.85 0.60 0.40 (0.034) (0.024) (0.016)

Good luck

Dave F

reply »

Justin Medernach

#11917

Re: What is spec on stretch???? | 19 April, 1999

| | | Hi, | | | I just cheesed my previous attempt at this. I looked through IPC 600 and couldn't find anything relating to dimensional stability of a board with regard to stretch. I found bow and twist but nothing on size. I have a PCB that is .030" over size in the width. THe width should be 3.540" and I've got 3.570". Sorry about the podunk request but I'm kind of stuck. | | | | Thanks, | | Justin | | | Justin: We use IPC-A-600 to the determine that a board looks correct and use IPC-D-300G, Printed Board Dimensions and Tolerances to cover dimensioning and tolerancing requirements boards. Standard manufacturing tolerances are: | | Greatest Board/Panel Dimension Class 1 Class 2 Class 3 | Up to 300 (12.00) 0.70 0.50 0.30 | (0.028) (0.020) (0.012) | More than 300 (12.00) 0.85 0.60 0.40 | (0.034) (0.024) (0.016) | | Good luck | | Dave F | Dave, Thanks a bunch, man.

Regards, Justin

reply »