samsung SM321 machine freezes on initializing

Subscribe to Thread

Samsung SM321 machine fails to initialize when booting softw... - Apr 05, 2024 by ddfreeze

also swapped out DRAM sticks ... - Apr 05, 2024 by ddfreeze

Can you try using a different set of DRAM sticks ? ... - Apr 08, 2024 by Micropak

have swapped 2 different boards, can try switching the dram ... - Apr 10, 2024 by ddfreeze

ddfreeze

#90829

samsung SM321 machine freezes on initializing | 5 April, 2024

Samsung SM321 machine fails to initialize when booting software. I have swapped PCI and communication boards, all resulting the same, I replaced the CMOS battery on communications board, tested the voltage on the backplane, and reloaded the software several times.

Is there a CMOS resetting procedure for the mottrolla communication card?

gives DPRAM sync error.

Attachments:

SM messsage 1.jpg [1.3M]
SM message 2.jpg [1.6M]

reply »

ddfreeze

#90830

samsung SM321 machine freezes on initializing | 5 April, 2024

also swapped out DRAM sticks

reply »

Micropak

#90839

samsung SM321 machine freezes on initializing | 8 April, 2024

Can you try using a different set of DRAM sticks ?

reply »

ddfreeze

#90851

samsung SM321 machine freezes on initializing | 10 April, 2024

have swapped 2 different boards, can try switching the dram sticks, or ordering new ones. also the cmos battery on the motrola communications battery was dead, put a new one in, was wondering if there was a cmos reset/ jumper?

reply »