Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Topaz-X Software

Views: 1264

#90812

Topaz-X Software | 3 April, 2024

I tried to clone my cfi-128 flash memory card, but can't get it to boot. I am concerned because I have no backup if the original Flash card stops working. Does anybody have a flash card with Topaz-x VIOS and (MSDOS 6.2) preloaded? I would be looking to purchase..

thanks,

Llyd

reply »

#90813

Topaz-X Software | 3 April, 2024

Not every program can clone a CF card. I did it but I need to check with what kind. You can also simply insert a new CF card into the machine, INSTALL DOS from floppy disks (same version) and then COPY the entire disk EXCEPT the system files (msdos.sys, io.sys). And you also need to properly configure the disk (number of heads, cylinders, etc. in the machine's BIOS).

reply »

#90816

Topaz-X Software | 4 April, 2024

I copied using "USB Image Tool".

reply »

#90818

Topaz-X Software | 4 April, 2024

Thanks, but that didn't work on my PC

reply »

#90870

Topaz-X Software | 16 April, 2024

I'm in a similar situation. Let me play around for the next few weeks and see what i can come up with.

reply »

convection smt reflow ovens

Manufacturing Software