DEK Horizon 05

Subscribe to Thread

We have a DEK Horizon 05 with stencil clamps operational on ... - Feb 14, 2024 by JimBorrelli

We don't have that machine, but our other DEK's all share a ... - Feb 16, 2024 by MistrThou

Thanks, will do. The point that's odd is one side functions.... - Feb 16, 2024 by JimBorrelli

I was correct...the cable that operates the stencil clamps o... - Feb 16, 2024 by JimBorrelli

Search for 163368 on SMTnet. Look in the list further down o... - Feb 19, 2024 by davef

A spare part due very soon, now to change it out. I think I ... - Feb 29, 2024 by JimBorrelli

JimBorrelli

#90572

DEK Horizon 05 | 14 February, 2024

We have a DEK Horizon 05 with stencil clamps operational on left side only, right side non-opertional. Any ideas where to get started troubleshooting?

reply »

MistrThou

#90587

DEK Horizon 05 | 16 February, 2024

We don't have that machine, but our other DEK's all share a solenoid. Air for both sides should be on or off all together. I'd check for an air supply to the clamps that switches when commanded to clamp or unload.

reply »

JimBorrelli

#90595

DEK Horizon 05 | 16 February, 2024

Thanks, will do. The point that's odd is one side functions. I think there may be a cable that causes each bank to clamp that may be broken. Time to get my hands dirty...

reply »

JimBorrelli

#90596

DEK Horizon 05 | 16 February, 2024

I was correct...the cable that operates the stencil clamps on the right bank is severed...do you know where I can get a replacement cable part number 163368? Thanks.

reply »

davef

#90600

DEK Horizon 05 | 19 February, 2024

Search for 163368 on SMTnet. Look in the list further down on this page https://smtnet.com/parts/index.cfm?fuseaction=view_item&amp;amp;item_id=165987&amp;amp;company_id=54555

Contact Qinyi Electronics Co., Ltd and ask for Cosima ( cosima@qy-smt.com )

reply »

JimBorrelli

#90643

DEK Horizon 05 | 29 February, 2024

A spare part due very soon, now to change it out. I think I have to remove the entire right arm...suggestions or guidance WELCOME. Thanks!

reply »