Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
Samsung SM482

Samsung SM482

Subscribe to Thread

Views: 1573

Hello all! We are trying to program a new board on our machi... - Oct 26, 2022 by Ryan S

Problem solved...Sensor would see the board at the stop, but... - Oct 26, 2022 by Ryan S

We often have to put a small Post-it note on the corner of a... - Oct 27, 2022 by ProcEng1

there is an ajustment on the sensor itself. You may be able... - Oct 27, 2022 by ProcEng1

Oh, I didn't realize they were adjustable gain...I'm pretty ... - Oct 27, 2022 by Ryan S

It's a small screw adjustment. Ours is toward the input side... - Oct 27, 2022 by ProcEng1

I will give it a try here in a bit, working on some part cha... - Oct 27, 2022 by Ryan S

Hi, could you describe your troubles in detail by email and ... - Nov 01, 2022 by sophy

Sophy, Thank you for the response, but we've got it figured... - Nov 01, 2022 by Ryan S

ok, great, it doesn't matter if the problem is solved. If y... - Nov 02, 2022 by sophy

Samsung SM482 | 26 October, 2022

Hello all! We are trying to program a new board on our machine, but keep getting an error of 'Board did not reach stopper'. The board is reaching the stopper, sensors are seeing the board, I'm lost as to what it could be. Loaded up a similar board and it runs just fine. Any help would be appreciated! Thank you! Ryan

Samsung SM482 | 26 October, 2022

Problem solved...Sensor would see the board at the stop, but when it clamped in the BUT, the sensor didn't see it anymore. Board is a matte finish so we're putting a sticker on the bottom so it sees it better.

Samsung SM482 | 27 October, 2022

We often have to put a small Post-it note on the corner of a board due to the color or a route out area hitting the sensor.

Samsung SM482 | 27 October, 2022

there is an ajustment on the sensor itself. You may be able to adjust it so that it "sees" the board in the UP position, since it sees it as it travels in.

Samsung SM482 | 27 October, 2022

Oh, I didn't realize they were adjustable gain...I'm pretty new to PCB's and the machines. I'll take a look again at the sensor. Thank you!

Samsung SM482 | 27 October, 2022

It's a small screw adjustment. Ours is toward the input side. You can grab one of your boards, manually lock it in, and adjust until the light changes.

Samsung SM482 | 27 October, 2022

I will give it a try here in a bit, working on some part changes.

Samsung SM482 | 1 November, 2022

Hi, could you describe your troubles in detail by email and pictures? Maybe we GOLDLAND can solve the problem for you. I will report your questions to our engineering team. You can send your question to my colleague Quinn at sales07@goldlandsmt.com. I have notified him.

Samsung SM482 | 1 November, 2022

Sophy,

Thank you for the response, but we've got it figured out. The sensor was just low enough that it would see the board as it came in, but once it clamped in the BUT it would lose it. I simply raised the sensor up roughly 1/16" and it has been working well since. Thank you!

Ryan

Samsung SM482 | 2 November, 2022

ok, great, it doesn't matter if the problem is solved.

If you have any questions in the future, you are welcome to consult our Goldland company.

Looking forward to your reply anytime

SMTnet
»
Electronics Forum
»
Samsung SM482

World's Best Reflow Oven Customizable for Unique Applications

Software for SMT placement & AOI - Free Download.

Nozzles, Feeders, Spare Parts - Siemens, Fuji, Juki, Yamaha, etc...

© 1995-2024 SMTnet

Automotive Precision Fluid Dispensing Machines

Now Online

193
Visitors

1
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

One stop service for all SMT and PCB needs

Void Free Reflow Soldering

ipc certification