Mirae MX200LP (Delay)

Subscribe to Thread

In the Mirae machine we can give an individual delay for eac... - Aug 26, 2022 by Electronics

It sounds like you are referring to "place time". ... - Nov 01, 2022 by griinder

check 'machine' then 'parameters' and make sure 'part check ... - Nov 02, 2022 by bobpan

Electronics

#88329

Mirae MX200LP (Delay) | 26 August, 2022

In the Mirae machine we can give an individual delay for each component, in this case the delay in Z is in all of them, the nozzle stays on top of the component for a long time, this happens in any program, could we have accidentally changed some configuration? However, we have already compared values with another machine and everything seems to be ok. this happened from one moment to the next, can anyone help us solve this mystery?

reply »

griinder

#88559

Mirae MX200LP (Delay) | 1 November, 2022

It sounds like you are referring to "place time". This is set two different places, the component database (Part Information->misc. Info), and the profile in component editor under the other tab. Default is 20. There is a way to change numerous values at once, but it takes a hidden click and password to do. First verify both places for a part are set to 20. Is it possible you slowed down your machine Z speed? Are the spindles also traveling slow?

reply »

bobpan

#88568

Mirae MX200LP (Delay) | 2 November, 2022

check 'machine' then 'parameters' and make sure 'part check wait delay' is set to 0. Also I would turn off CDON usage in 'ANC' for each head. If they are set to 'YES' change them to 'NO' and see what happens.

reply »