CP45FV NEO- Error in DP Initialize comunication

Subscribe to Thread

Hello to you all. we got a CP45FV-NEO machine. it shows imag... - May 25, 2021 by Kamran

is Mark3 program started on startup or do you start it manua... - May 25, 2021 by bukas

Thank you for your attention. It shows an error on startup t... - May 26, 2021 by Kamran

its not that you should never open it manually, it just can ... - May 26, 2021 by bukas

Hi, I live same error 3 years ago. I can fix this problem. b... - Jun 05, 2021 by Dannie

Kamran

#86702

CP45FV NEO- Error in DP Initialize comunication | 25 May, 2021

Hello to you all. we got a CP45FV-NEO machine. it shows image1 error and I have no idea what this is for. please help me through it

Attachments:

reply »

bukas

#86703

CP45FV NEO- Error in DP Initialize comunication | 25 May, 2021

is Mark3 program started on startup or do you start it manually? It can be like this if you run it manually. Other cause is bad contact in PCB slot or connector in 90% cases. Wash then with contact cleaner and insert and pull out few times to clean contacts. that should do it. Go over both PC and industrial computer PCBs

reply »

Kamran

#86711

CP45FV NEO- Error in DP Initialize comunication | 26 May, 2021

Thank you for your attention. It shows an error on startup too, so it get closed by itself. when I start it manually it shows the above mentioned errors. So I should never open up Mark3 manually right? I'll clean everything up and tell you the result

reply »

bukas

#86712

CP45FV NEO- Error in DP Initialize comunication | 26 May, 2021

its not that you should never open it manually, it just can be a problem sometimes. CP45 have a few problems with data corruption and this can be one of them. just make sure you regularly backup disk, and dont delete old backups straight away.

reply »

Dannie

#86742

CP45FV NEO- Error in DP Initialize comunication | 5 June, 2021

Hi, I live same error 3 years ago. I can fix this problem. but need remote access by (AnyDesk) software. and have 50USDT cost.

send access information dannie.darko@outlook.com

reply »