Panasoinc MV/MSH feeders

Can anyone tell me how a Panasoinc MV feeder and a MSH feeder compare in terms of component sizes and placment speeds? I was told that MV feeders can run on an MSH although they take up 2 slots. I'd appreciate the help.

Regards,

Jason Robotham

reply »

| Can anyone tell me how a Panasoinc MV feeder and a MSH feeder compare in terms of component sizes and placment speeds? I was told that MV feeders can run on an MSH although they take up 2 slots. I'd appreciate the help. | | Regards, | | Jason Robotham

Do not attempt to put a MV double feeder on an MSH as you will damage machine and feeder. Single parts cassettes (MV) can be used on the MSH however there will be speed issues on the MSHII.

Component size is the same for thickness, max 6mm. Max feeder size is 32mm width on the MSH vs 44mm for the MV.

Let me know if you need more clarification |

reply »

| | Can anyone tell me how a Panasoinc MV feeder and a MSH feeder compare in terms of component sizes and placment speeds? I was told that MV feeders can run on an MSH although they take up 2 slots. I'd appreciate the help. | | | | Regards, | | | | Jason Robotham | | | Do not attempt to put a MV double feeder on an MSH as you will damage machine and feeder. Single parts cassettes (MV) can be used on the MSH however there will be speed issues on the MSHII. | | Component size is the same for thickness, max 6mm. Max feeder size is 32mm width on the MSH vs 44mm for the MV. | | Let me know if you need more clarification | | | | JAS, Will using a MV100 8x4 feeder which requires a 21.5mm space between them on a MSH 1 slot that requires a 15.5mm space per slim line MSH 8mm feeder affect the speed? Cause damage to the feeder/machine? Are there any limitations on the MV feeder as opposed to the MSH feeder? Thanks for your time & help.

reply »

| | | Can anyone tell me how a Panasoinc MV feeder and a MSH feeder compare in terms of component sizes and placment speeds? I was told that MV feeders can run on an MSH although they take up 2 slots. I'd appreciate the help. | | | | | | Regards, | | | | | | Jason Robotham | | | | | | Do not attempt to put a MV double feeder on an MSH as you will damage machine and feeder. Single parts cassettes (MV) can be used on the MSH however there will be speed issues on the MSHII. | | | | Component size is the same for thickness, max 6mm. Max feeder size is 32mm width on the MSH vs 44mm for the MV. | | | | Let me know if you need more clarification | | | | | | | JAS, | Will using a MV100 8x4 feeder which requires a 21.5mm space between them on a MSH 1 slot that requires a 15.5mm space per slim line MSH 8mm feeder affect the speed? Cause damage to the feeder/machine? Are there any limitations on the MV feeder as opposed to the MSH feeder? | | Thanks for your time & help. | | Its actually 16mm , however , there will be no effect on speed and will not damage the machine. There would be no limitation between feeders, only limitations in component range as spec. by machine. Are you a current user or refurb house?

reply »