During production our MPM Accuflex stopped working. When going into "Play" mode to run production it almost instantly Pauses. When going into vision setup it fails to load the PCB saying "The PCB Did Not Load". Ignoring this error and trying to read the stencil fiducials without a PCB loaded the camera does not automatically move but can be jogged using the arrows.
When trying to load the PCB the conveyor does not move at all. using the arrows at the bottom of the program screen it will feed a board from the input side to the output side and vice versa.
I went through the diagnostics and all the PCB sensors work per the Input Diagnostics, and the camera and conveyor can be jogged (Belt to outroad/Belt to inroad).
We are running AccuPro 8.6.3
Any assistance would be greatly appreciated. Thank you in advanced.
reply »