Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Problems with the Estop in 1809 exl

Views: 2382

#80314

Problems with the Estop in 1809 exl | 25 April, 2018

hello, I'm learning to use the oven 1809 exl and when I try to put it on the Estop button is on all the time and allows use of the oven I read in the manual but I can not find an answer to deactivate it, could you tell me how I can disable this button?

Best Regards

reply »

#80318

Problems with the Estop in 1809 exl | 26 April, 2018

1. check both e-stop buttons are released 2. reset e-stop with blue reset button 3. open Alarms menu(there is icon) 4. acknowledge alarms(next to alarms menu icon) 5. clear alarms(next to acknowledge alarms icon) 6. go back to operating interface(third icon from right, I think)

reply »

#80327

Problems with the Estop in 1809 exl | 27 April, 2018

Thanks for the answer, but the problem is the blue button is tur on all the time and I need turn of for work whit the oven.

Best Regards.

reply »

Flying Probe Probe Tester with AOI

Used PCB Equipment - AdoptSMT