Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


someone has the software of the samsung cp-40 lv + I can not find it

Views: 5436

#79369

someone has the software of the samsung cp-40 lv + I can not find it | 22 November, 2017

I need the soft for samsung cp40 lv + i can't find it. reinstall the s.o and I would need the soft.

on the other hand it gives me an error that begins to give continuous beeps without stopping and I get the following error message "no sequence finished from handler" "failed to create document" "no command response from handler. (oxfff)" thanks

reply »

#82536

someone has the software of the samsung cp-40 lv + I can not find it | 12 May, 2019

I'm in the same boat, fresh install of win 98 and I have multiple versions of the mmi install exe but get these errors. Missing drivers? Is it fixable or lost cause?

reply »

#82537

someone has the software of the samsung cp-40 lv + I can not find it | 12 May, 2019

Fixed! Someone else on here mentioned disabling the light control in sys.ini, and then the issue I was having was both teach boxes being plugged in( one may be faulty) and sys.ini said only 1 for teach position. I unplugged the rear teach box and now it works like it did before I messed up the original hard drive :)

reply »

#82646

someone has the software of the samsung cp-40 lv + I can not find it | 24 May, 2019

Hi is the problem solved all ready?

I have the cp40cv with CD.

I'm looking for a manual to program it offline.

reply »

#83175

someone has the software of the samsung cp-40 lv + I can not find it | 5 August, 2019

deleted

reply »

#85912

someone has the software of the samsung cp-40 lv + I can not find it | 17 November, 2020

Hi Rob, we have the same problem on our cp40 : no sequence finished from handler could you let me know how you get into the sys.ini ?Thx.

David

reply »

#85913

someone has the software of the samsung cp-40 lv + I can not find it | 17 November, 2020

use password

Scpssa

reply »

#85915

someone has the software of the samsung cp-40 lv + I can not find it | 17 November, 2020

will try. Thank You. David

reply »

SMT spare parts - Qinyi Electronics

Manufacturing Software