Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


flex circuit

Views: 1439

#77529

flex circuit | 4 May, 2017

Hello All, I was given an assembled flex circuit PCB and asked how the board was depanelized as there are no view-able witness marks that I can see. Any ideas? Thanks in advance on any insight to depanelizing without leaving witness marks on the FR4 edges. Jack

reply »

#77554

flex circuit | 11 May, 2017

Hi ,

Can you put a pic here ?

reply »

#77555

flex circuit | 11 May, 2017

Laser or milling.

reply »


Rob

#77573

flex circuit | 15 May, 2017

or pressing, or cutters and linishing if low volume.

If high volume I'm with Pavel on routing.

reply »

#77651

flex circuit | 31 May, 2017

Hello. gerber file is important. sending here http://www.pcbgogo.com/j best solutions will return back to you.

reply »

#77652

flex circuit | 31 May, 2017

Don't rule out the possibility that the board shop depanelized it and it was assembled after depanelization.

Been there, dealt with it, expletives deleted.

reply »

Reflow Oven

ADJUST-A-VAC Vacuum Tweezer for fragile components, wafers, MEMS devices tweezers