Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

BGA basics

Views: 3547

We do SMT now, but might need to do some BGA. I assume ... - Jul 10, 2012 by gaz  

From some of the equipment we have here at the facility you ... - Jul 17, 2012 by tombstonesmt  

If your pick and place can handle the part placements, you a... - Jul 23, 2012 by Hegemon  

The prices you have been given for rework stations are for n... - Jul 23, 2012 by Reese  


gaz

#66798

BGA basics | 10 July, 2012

We do SMT now, but might need to do some BGA.

I assume we need: xray or some way to inspect bga workstation bga reballing system

Does this look ok?

Can anyone give me a rough idea of what it costs to get the basics needed for very low volume BGA?

Thanks

reply »


tombstonesmt

#66842

BGA basics | 17 July, 2012

From some of the equipment we have here at the facility you could expect the following:

X Ray- ~$75K-$100K BGA Repair- ~$30K-$50K

We don't own a reballing station.

reply »


Hegemon

#66861

BGA basics | 23 July, 2012

If your pick and place can handle the part placements, you are most of the way there. X-Ray for Inspection of BGA and other bottom terminations = $60K(USD) and up. BGA Rework Station $40K and up. You can reball most any BGA with your Rework station.

No panic with BGA, it is just another solderable component after you have done a few. 'hege

reply »

Reese

#66863

BGA basics | 23 July, 2012

The prices you have been given for rework stations are for new systems. You can find cheaper systems (much cheaper) out there from used equipment dealers. X-ray will be harder to find, but you may find one that will suit your needs at a reasonable price.

reply »

SMT fluid dispensing
Sell Used SMT & Test Equipment
Now Online
81
Visitors
0
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Fixate labor costs with selective soldering solutions
Jetting Pump for Integration
thru hole soldering and selective soldering needs