Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

DEK 265GSX squeegee travel distance

Views: 3372

Does anyone know if it is possible to change the distance th... - Jun 16, 2011 by dman97  

yes there is - I think it is called front print limit & rear... - Jun 17, 2011 by aj  

Yes it is "Print Front Limit" and "Print Rear Limit". Neg... - Jun 29, 2011 by DEKHEAD  


dman97

#64507

DEK 265GSX squeegee travel distance | 16 June, 2011

Does anyone know if it is possible to change the distance that the squeegees travel? What i mean is... Is it possible to change where the squeegees start and stop during a print? Our squegees seem to stop right at the edge of the apertures and this causes lots of paste to fall into the apertures. We get excessive amounts of paste on the edges of the boards. On an MPM machine this option is called squeegee stroke. Is there such an option on these DEK machines? Thanks for any help!

reply »


aj

#64508

DEK 265GSX squeegee travel distance | 17 June, 2011

yes there is - I think it is called front print limit & rear print limit

reply »


DEKHEAD

#64576

DEK 265GSX squeegee travel distance | 29 June, 2011

Yes it is "Print Front Limit" and "Print Rear Limit".

Negative value extends the stroke,

Depends on software version how useful it will be, as there are differing limits on how much you can extend the stroke.

http://www.dekhead.com

reply »

Software for SMT
pcb fluid dispensers
Now Online
106
Visitors
1
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Electronics Equipment Consignment
Fixate labor costs with selective soldering solutions
One stop service for all SMT and PCB needs

Equipment Auction - Eagle Comtronics: Low-Use Electronic Assembly & Machining Facility 2019 Europlacer iineo + Placement Machine Test & Inspection: Agilent | Tektronix | Mantis Machine Shop: Haas VF3 | Haas SL-20 | Mult. Lathes